Harbor Freight Coupon Thread
- Thread starter RbrtAWhyt
- Start date
subarub4
Well-known member
Eric Hawkins
Well-known member
Eric Hawkins
Well-known member
Eric Hawkins
Well-known member
e30bradley
Well-known member
where can I find a 20% of coupon to buy a toolbox with?
vartz04
Well-known member
Thanks,
and good luck with the 20% they don't have those for boxes anymore. your best bet is to hold out for a cheap coupon for them. or find a scratched one in the store.
and good luck with the 20% they don't have those for boxes anymore. your best bet is to hold out for a cheap coupon for them. or find a scratched one in the store.
e30bradley
Well-known member
okay. so if I brought a 20% off coupon there and brought a tool box up to the counter they would say I can't use it? I've never been to HF so I don't know this stuff. what is the cheapest I could possibly get one of those $800 56" boxes? and do the ad ons for the 42" for on the 56"?
vartz04
Well-known member
never really see coupons for the 56" the 42" goes on sale from $329-$369 with a coupon. and the add ons should work but im not 100% on that.
and yes they will tell you no 90% of the time. the coupon says right on it that tool boxes are not included.
If it was me id buy the 42" and the side box with the 7 drawers and be $200 or so ahead of the game.
and yes they will tell you no 90% of the time. the coupon says right on it that tool boxes are not included.
If it was me id buy the 42" and the side box with the 7 drawers and be $200 or so ahead of the game.
subarub4
Well-known member
Thanks again!
corey4x4man
Well-known member
I have seen them down to 699 if i remember right on the 56" box
this is in the latest coupon flyer for $289.
Please post back with a review of this product if you buy it. (or a link to the review thread if you start a new thread on it. ) I'm interested to see how decent this is.
http://widgets.harborfreight.com/ws...age=1812a1.html&cust=00113487584&keycode=1003
Last edited:
If you were local, I've got a brand new one that I never used that I'd sell you for $10 bucks. (prob not worth the cost to ship to Michigan though).
It's on this page. from Maxum May 2012
source post 2896 http://slickdeals.net/f/1276399-Harbor-Freight-Coupon-Thread?&page=194
heh... let me send you my paypal address.
no I bought one a few years ago for my 5x8 utility trailer. The tounge doesn't have enough room on it to 'swing it up" and use it. So I took it off the same day I put it on, intending on returning it.
I went past their return policy and it's just sitting in the garage.
Anyone have a coupon for the hydrolic pipe bender, i saw it for $99 wanna do better any out there? thks
http://www.harborfreight.com/catalogsearch/result?q=hydrolic+tube+bender
http://www.harborfreight.com/catalogsearch/result?q=hydrolic+tube+bender
Eric Hawkins
Well-known member
Eric Hawkins
Well-known member
vartz04
Well-known member
anyone got the $289 coupon for the 26" tool chest (red one not that black piece of ****) Inside track club ones are fine as I am a member.
Last edited:
The US GENERAL short side cabinet (67436) is on sale for $130, I havent seen it drop below 200 in the last year
http://www.harborfreight.com/2-shelf-end-cabinet-for-roller-tool-chest-67436.html
http://www.harborfreight.com/2-shelf-end-cabinet-for-roller-tool-chest-67436.html
Attachments
concealer404
Well-known member
- Joined
- Mar 13, 2012
- Messages
- 1,147
I won't be renewing, if that tells you anything.
Yeah there's some good deals, but the best deals are still in the magazines.
What usually happens is that the ITC is full of **** you have no interest in for about... 2 months. Then has one week of nothing but stuff you want/need. Then you go for 2 months again.
Probably the best part about it is that if you buy something and then find a coupon or better sale on it in the next 30 days, you just bring in the flyer or coupon and they give you credit.
vartz04
Well-known member
I bet you save your $30 in that one week though.
concealer404
Well-known member
- Joined
- Mar 13, 2012
- Messages
- 1,147
I'm not real sure... i've seen a lot of the ITC stuff go on normal sale to the public usually about a week or two later, and the prices aren't much different.
I'm sure the membership pays for itself, but i don't really see the point of keeping it for more than a year, since after a year, you'll have everything you'll ever want from HF anyways, save for the things you never get coupons for through the ITC anyways. (Boxes, presses, hoists.)
vartz04
Well-known member
I signed up for it a couple weeks ago. I figure with the $10 gift card ill make it back. Im buying a house in the fall so there will be lots of stuff I need. we will see how the deals go if I reup it.
xcoldricex
New member
- Joined
- Jan 4, 2011
- Messages
- 4
can you put that end cabinet on the 5 drawer tool cart?
Last edited:
At my local HF they always use the $10 gift card against the membership. That makes it $20 a year.
subarub4
Well-known member
Can you use the 20% off coupon with another item?
say I'm getting the 6 ton jack stands with a coupon for $29.99 but I also want to get a 11 gal air tank which is like $39 can I use my 20% off or no?
because I see the jack stands say can't be used with any other coupon so that means the 20% right?
say I'm getting the 6 ton jack stands with a coupon for $29.99 but I also want to get a 11 gal air tank which is like $39 can I use my 20% off or no?
because I see the jack stands say can't be used with any other coupon so that means the 20% right?
concealer404
Well-known member
- Joined
- Mar 13, 2012
- Messages
- 1,147
You can use one coupon per item.
sxk122
Well-known member
I'm wondering the exact same thing....... anyone?
Dimensions listed as "Overall dimensions: 16-3/4" L x 18" W x 33-1/4" H" "Attaches to 42" Roller Cabinet (sold separately) 44-3/4" L x 18-1/2" W x 40" H"
The 5 Drawer Cart is "Overall dimensions: 20.7" L x 37.7" W x 41.4" H"
adamsredlines
Well-known member
The lip the end cabinet "grips" onto is very stiff on the cabinet, because its short.
If you try to put that on the roll cart, I dont think it would be as sturdy since the sidewall of the roller cart is so much deeper.
If you try to put that on the roll cart, I dont think it would be as sturdy since the sidewall of the roller cart is so much deeper.
vartz04
Well-known member
it works seen pics of it in the show us your tool cart thread. If it was me though id be putting 2 casters on the bottom of the drawer section to help support it. I put that little craftsman tool 6 drawer caddy on my bluepoint cart and that even flexed the sidewall of the cart and it weighs prolly half as much'
vartz04
Well-known member
nothin shows up there len
Found this while looking for a coupon for the powdercoat gun.
http://www.retailmenot.com/showcoupon/3468084
97190843CODE
Harbor Freight: Save $150.00 OFF 11 Drawer Roller Cabinet For Only $149.99 Expire 7/26/2012
http://www.retailmenot.com/showcoupon/3468084
97190843CODE
Harbor Freight: Save $150.00 OFF 11 Drawer Roller Cabinet For Only $149.99 Expire 7/26/2012
vartz04
Well-known member
thats for the black one thats a POS
Ign
Well-known member
With 20% coupons you can print I don't know if anyone wants actual 20% coupons from magazines? I have two if anyone's interested. PM me. I'll cover postage, not worried about the cost of a stamp.