Hazet tool thread

[sarel.wagner]

And the valve adjustment tool, for VW Air cooled engines...



Rgrds

 

[Fatandre]

could I cange the slider on my hazet toolbox and put on the one that folds?

 

[bart1]

could I cange the slider on my hazet toolbox and put on the one that folds?
...

The arms? Probably. As usual, I would recommend confirming on thesamba

 

[stonesfan68]

Here's a few:

So what are these tools used for? Are they the same size on both ends?

 

[bart1]

So what are these tools used for? Are they the same size on both ends?

Typically they are. You can stick a pipe/extension in either end. The short end usually allows a pass thru. Make sense?

 

[lok]

View media item 24085

 

[stonesfan68]

^^^ Crystal clear now, thanks!

 

[Fatandre]

now those are pretty interesting I must say.

 

[FlyBy]

View media item 24085

OOOOOOO! I would really like a set of those!

I know it's been covered before, but wheres a place to get these at a decent price in the states?

 

[lok]

OOOOOOO! I would really like a set of those!

I know it's been covered before, but wheres a place to get these at a decent price in the states?

These in the photo are Gedore. I don't know if I can really help you but you can buy Gedore or Hazet from here.
For Hazet you can also ask the member jensputzier

 

[lok]

^^^ Crystal clear now, thanks!

You welcome.

 

[Fatandre]

Picked up a new baby to the collection!!

 

[Monte]

nice Assistent 172 HD !

 

[goodysgotacuda]

My only Hazet tool, don't really use it any more..

 

[JMcFly]

I miss my Hazet Assistent

 

[Pantsfall_McFixit]

I had a question, is the blue switch on some Hazet ratchets plastic? It kinda looks like it, but I wasn't sure.

 

[HICKS]

My only Hazet tool, don't really use it any more..

Want to sell it?

 

[50ate]

My vintage Hazet shop display, haven't figured out when it was made.
I will add more NOS hazet tools to this when I find the time to go through the boxes of tools from my dad's old retail shop...


Your board was made some time after 1965... They switched to the uppercase A in 1965 and your board shows the capital A.. That is about as far as I can narrow t down... Nice display tho
,.....................

.......

 

[goodysgotacuda]

Want to sell it?

No thanks, I only have the one from my BMW training. I also have this thing with selling tools haha.

 

[Fatandre]

You guys have some badass collections
To bad it isnt as big as some SO collections some have here on the forum

 

[Tone-NY]

Want to sell it?

There is one on the bay forsale $350!

 

[Monte]

I had a question, is the blue switch on some Hazet ratchets plastic? It kinda looks like it, but I wasn't sure.

yes .

 

[jvitez]

I miss my Hazet Assistent

I would prefer to have Miss Hazet as my assistant.

See photo number 3.

http://www.garagejournal.com/forum/showthread.php?t=171036

 

[goodysgotacuda]

There is one on the bay forsale $350!

Dang!

 

[purpurite]

Pulling this thread out of mothballs for the new year with a question for you Hazet fans.

Anyone figure out a paint match to the older Hazet teal blue? Not the newer royal blue, but the older colors on the Assistants and other tool boxes.

Or, does anyone that owns a Hazet metal tool container that also owns a Pantone system color book that can do a chip match for me?

 

[Monte]

Hazet color info

http://www.hazet.de/download-service/download/hazet-ci-vorgaben/

 

[purpurite]

Brilliant! Thanks Monte, I lookd for that info everywhere with no results. I actually reverse engineered one of their catalog PDFs to get the printing ink colors, but that web page is even better!!



doug

 

[mofo62]

.




*Hazet - 833-02

http://www.garagejournal.com/forum/newreply.php?do=newreply&noquote=1&p=2575663


V!

 

[ricleh]

Pulling this thread out of mothballs for the new year with a question for you Hazet fans.

Anyone figure out a paint match to the older Hazet teal blue? Not the newer royal blue, but the older colors on the Assistants and other tool boxes.

Or, does anyone that owns a Hazet metal tool container that also owns a Pantone system color book that can do a chip match for me?

Recommended alternatives to Hazet Blau:

Humbrol #48, Mediterranean Blue
Tamiya x14
Revell 51
RAL 5002

 

[purpurite]

Recommended alternatives to Hazet Blau:

Humbrol #48, Mediterranean Blue
Tamiya x14
Revell 51
RAL 5002

Thanks, I had found that list elsewhere, too, and other than the teal Humbrol color, they are all completely different colors and closer to the Hazet dark blue. Not to mention, they are all really plastic model paints and only available in very small "touch-up" quantities. Not sure who assembled that list, but it's not tremendously accurate from what I can tell.

Also, the actual RAL color for the green-blue according to Hazet (Monte's link) is 660-2.

 

[Malaga]

For this year's GJ Secret Santa gift exchange, I received a Hazet Torx screwdriver set all the way from the Netherlands. (Also posted in the 2012 SS thread.) Although this set is posted somewhere above, here it is again, just because it's cool.

 

[ricleh]

Thanks, I had found that list elsewhere, too, and other than the teal Humbrol color, they are all completely different colors and closer to the Hazet dark blue. Not to mention, they are all really plastic model paints and only available in very small "touch-up" quantities. Not sure who assembled that list, but it's not tremendously accurate from what I can tell.

Also, the actual RAL color for the green-blue according to Hazet (Monte's link) is 660-2.

I used the Tamiya on one of my Assistents and it was an exact match as far as my eyes are concerned. But I won't argue with your expert theoretical knowledge of paint and colors.

 

[purpurite]

I'm pretty sure the newer style carts and trolleys are a different blue/teal than the older pieces. It looks like their blues have changed over time. All of those paints are probably all accurate to some Hazet part from some period of time.

 

[Monte]

btw. the original paint can be bought from Hazet in 0,5 liter buckets.

 

[purpurite]

btw. the original paint can be bought from Hazet in 0,5 liter buckets.

That's great to know. Thanks Monte! I have a vintage bench vise screaming for Hazet teal blue.

 

[composite]

My round tool kit. Plus wrench

 

[Monte]

nice kit composite !!



btw:
<iframe width="420" height="315" src="http://www.youtube.com/embed/XnSENeRSE74" frameborder="0" allowfullscreen></iframe>

 

[loranger]

My only Hazet tool...Not even sure where I got it from! Wish I could find the rest to make a set at a reasonable price. I really need some metric flare nut wrenches.

 

[purpurite]

My only Hazet tool...Not even sure where I got it from! Wish I could find the rest to make a set at a reasonable price. I really need some metric flare nut wrenches.

Very nice! I have been searching for a Hazet flare nut wrench set without any luck. Post again here if you find any more!

 

[composite]

nice kit composite !!

thanks

Another kit. The kit has all it original hazet tools. Added a picture of the wrenchs. I know they are correct for the kit and have check with other owners of these kit. Can anyone tell me why the 10 x 12 wrench and 13 x 15 wrenchs are different to the others. Sorry about the standard of the photos