Home Depot Clearance Thread 2014

bodybuild · Jul 24, 2014

nothing good recently at HD?

captain14 · Jul 24, 2014

I found the Husky 14 parts bag w/ 4 plastic parts trays in the tool bag area.
Rang up at the registar for .01. Made the decision to get it. Cashier was helpful to verify the price. regular price of $29.88

http://www.homedepot.com/p/Husky-Red-Fabric-6-in-Part-Bin-Bag-82018N11/203020209

djb2 · Jul 24, 2014

I have no inside knowledge, but employees have posted here that items priced at $0.01 were supposed to have been removed from the clearance section and discarded rather than sold at that price.

Of course, hearsay doesn't have any weight, legal or moral. If that's actually the case, they would have the check-out system put up a notice that the item isn't available for sale.

fivespdcat · Jul 24, 2014

I picked up 200 stanley utility knife blades for $9. Not a bad deal if you ask me.

DLAB · Jul 24, 2014

djb2 said:
I have no inside knowledge, but employees have posted here that items priced at $0.01 were supposed to have been removed from the clearance section and discarded rather than sold at that price.

Of course, hearsay doesn't have any weight, legal or moral. If that's actually the case, they would have the check-out system put up a notice that the item isn't available for sale.

I used to work at home depot and i was always told that items that reach a penny have to be thrown out. But if a customer brings it to the register and it rings up a penny they have to sell it to you.

Cameronl · Jul 24, 2014

DLAB said:
I used to work at home depot and i was always told that items that reach a penny have to be thrown out. But if a customer brings it to the register and it rings up a penny they have to sell it to you.

I once bought a bag of Fiery Cheetos on a whim at HD. Scanned it at the self checkout. It rang up $.01. The girl monitoring the area came over and said she had to talk to the manager. He said, "ok."

I grabbed the last four bags they had. :rocker:

crzipilot · Jul 25, 2014

very long thread on SD regarding .01 finds.....

risc · Jul 26, 2014

Owens Corning Garage Door Insulation Kit

My store in Tigard, Or has this marked down to $19.** from $75.95; I grabbed 2 and there were at least 2 left.

I've been wanting to do this for a while but $150 for a two car seemed outrageous, I just happened to be walking down the aisle and noticed them on clearance.

http://www.homedepot.com/p/Owens-Corning-Garage-Door-Insulation-Kit-8-Panels-GD01/202257272

AlwaysFixingSomething · Jul 26, 2014

I just got back from HD and found aluminium step flashing that rang up for a penny each. Normally 56 cents each. I grabbed about 50 of them. Its not marked on the shelf discounted I just got lucky after scanning them I only needed a few so I went back and bought 50 for a total of 1.12.
They are 4x4x8" galvanized.

AlwaysFixingSomething · Jul 26, 2014

I just got back from HD and found aluminium step flashing that rang up for a penny each. Normally 56 cents each. I grabbed about 50 of them. Its not marked on the shelf discounted I just got lucky after scanning them I only needed a few so I went back and bought 50 for a total of 1.12.
They are 4x4x8" galvanized.

One rang up as 56 cents with a diff item number.

188slo50 · Jul 26, 2014

risc said:
Owens Corning Garage Door Insulation Kit

My store in Tigard, Or has this marked down to $19.** from $75.95; I grabbed 2 and there were at least 2 left.

I've been wanting to do this for a while but $150 for a two car seemed outrageous, I just happened to be walking down the aisle and noticed them on clearance.

http://www.homedepot.com/p/Owens-Corning-Garage-Door-Insulation-Kit-8-Panels-GD01/202257272

Must be store only thing cause even on line it's $75. I could use 3 kits but not paying $200 plus.

Docman · Jul 27, 2014

risc said:
My store in Tigard

Nice. Deals at this store are few and far between. Or any in Portland for that matter. I always see stuff pop up on craigslist a couple days after folks post about them here, which kinda peeves me off. I wonder if it's an employee flipping products on the side.

zeekh · Jul 29, 2014

Does HD ever put the Echo weed whackers on clearance?

Cruzomatic · Jul 29, 2014

I don't think so, but I picked up their Echo SM-225 a month or so ago and like it a bunch. It was $199.99 on sale.

zeekh · Jul 29, 2014

Cruzomatic said:
I don't think so, but I picked up their Echo SM-225 a month or so ago and like it a bunch. It was $199.99 on sale.

Thats the one I've been eyeballing Its $219 now. Glad to hear you got your's on sale. Maybe I'll wait to buy it.

Cruzomatic · Jul 29, 2014

zeekh said:
Thats the one I've been eyeballing Its $219 now. Glad to hear you got your's on sale. Maybe I'll wait to buy it.

Sure...good luck. I'd recommend it.

stage20 · Jul 30, 2014

Grew up with echo and now I have my own. Started out witth ryobi stuff years ago. There is no comparison. I couldn't afford it to begin with and still can't. Lol. But no replacement for quality tools.

RRich · Jul 30, 2014

zeekh said:
Thats the one I've been eyeballing Its $219 now. Glad to hear you got your's on sale. Maybe I'll wait to buy it.

I've noticed every spring they're priced at $199. From summer on it's $219.
You would think the price would drop again at end of season but in the 3yrs I've been watching it never has. Late last summer they had a bunch of "refurb" units that appeared new for $149 but they didn't last long.

zeekh · Jul 30, 2014

RRich said:
I've noticed every spring they're priced at $199. From summer on it's $219.
You would think the price would drop again at end of season but in the 3yrs I've been watching it never has. Late last summer they had a bunch of "refurb" units that appeared new for $149 but they didn't last long.

Is that your dog in you Avatar? Looks like my Husky/Shepherd mix

tosainu1 · Jul 30, 2014

Toro Timemaster low lift blades are being clearanced out. This is from a Maryland store.

bucksnort59 · Jul 31, 2014

Husky SAE and Metric 7 piece ratcheting wrench set. SKU 343-501 MM and 343-480 SAE
$8, was $24

JonnyC · Jul 31, 2014

bucksnort59 said:
Husky SAE and Metric 7 piece ratcheting wrench set. SKU 343-501 MM and 342-480 SAE
$8, was $24

Sweet, I'll check my store. I need an SAE set to match my Metric.

stage20 · Jul 31, 2014

Cant get the wrenches to pull up. Prob off the site already. Reversible or flex by chance?

JonnyC · Jul 31, 2014

Damn, no wrenches at the price in my store. Unless the display is somewhere on an end cap.

I did see 824893 for $5 on clearance, a Zircon water level. No clue how it even works, I just have yellow tag disease.

mojo_13 · Jul 31, 2014

stage20 said:
Cant get the wrenches to pull up. Prob off the site already. Reversible or flex by chance?

If they are the ones I got a while ago no on both. I picked them up for $11 each after i saw a thread on here. Not bad for the price though.

stage20 · Jul 31, 2014

JonnyC said:
Damn, no wrenches at the price in my store. Unless the display is somewhere on an end cap.

I did see 824893 for $5 on clearance, a Zircon water level. No clue how it even works, I just have yellow tag disease.

You fill it with water about half way and you put it on a rope string or wire for use as a level. Works excellent to build piers docks walkways forms etc.

nicksnothereman · Jul 31, 2014

stage20 said:
Cant get the wrenches to pull up. Prob off the site already. Reversible or flex by chance?

Wishful thinking...

http://www.ebay.com/itm/Husky-7-pc-...Set-Metric-343-501-037103262820-/151078535543

They're bare bones one way combo wrenches, I have them, mixed bag (I had a lemon in the set that I didn't bother replacing). 8 bucks though.

unslow1 · Aug 1, 2014

stage20 said:
You fill it with water about half way and you put it on a rope string or wire for use as a level. Works excellent to build piers docks walkways forms etc.

Very useful for siding a house. Use it to set the bottom row and starter strips.

bucksnort59 · Aug 1, 2014

nicksnothereman said:
Wishful thinking...

http://www.ebay.com/itm/Husky-7-pc-...Set-Metric-343-501-037103262820-/151078535543

They're bare bones one way combo wrenches, I have them, mixed bag (I had a lemon in the set that I didn't bother replacing). 8 bucks though.

Jeepers, I'll have to go back and get the 5 SAE and the one MM set and put them on EBay if peeps are paying $45 for them. They've been sitting there for a couple of weeks.

Conway · Aug 1, 2014

Were do you find clearance items in home depot? Do they have a special section for them, or are they scattered through the store?

bucksnort59 · Aug 1, 2014

The wrenches were in the wrench section. Look for yellow price tags. My stores have clearance items all over and some have an end cap devoted to them with a big sign.

unslow1 · Aug 1, 2014

The ratcheting wrench sets weren't on clearance in Champaign IL. I even had them scan them to make sure price was correct. They did have the HDX 2 piece adjustable wrench sets for $1. Not high quality pieces but what do you want for 50 cents each.

http://www.homedepot.com/p/HDX-Adjustable-Wrench-Set-2-Piece-96897/204406151

franzdom · Aug 1, 2014

Not clearance but a KILLER deal,
Until 9/3/14 you can buy a Milwaukee M12 Hackzall kit for $99 or a M12 1/4" Fuel Impact kit for $169 or an M12 scanner kit for $199 and get a free M12 1/4" Impact, M12 right angle drill, M12 Multi Tool or M12 4.0A battery.

I chose to get a Hackzall and right angle drill with charger and 1 battery all for $99 plus tax :beer:

EDIT: this was an in-store deal but they had a huge sign that looked like it was corporate, and I see there are other great deals online. I wish I had waited before I bought the LED light stick for $79 last week

Ign · Aug 1, 2014

What's an M12 "scanner kit?"

monomach · Aug 1, 2014

Conway said:
Were do you find clearance items in home depot? Do they have a special section for them, or are they scattered through the store?

Sometimes they're where the item would normally be. Sometimes they set up a card table at the front of the store. Sometimes they're on an endcap in the middle of the store. Sometimes they hang them on a random upright anywhere in the store. Sometimes they just shove them on a shelf somewhere in the lumber.

My Home Depot is infuriating with this.

zeekh · Aug 1, 2014

Conway said:
Were do you find clearance items in home depot? Do they have a special section for them, or are they scattered through the store?

I find clearance items quite often on the end caps

franzdom · Aug 1, 2014

Ign said:
What's an M12 "scanner kit?"

Inspection camera with batteries and charger.

eddie98 · Aug 3, 2014

I scored one of this yesterday at my local HD in the Bargain Bin.
http://www.homedepot.com/p/Crescent...CSV/205155787?keyword=irwin+6+inch+swivel+tip

Reg $11.97, got it for $5.99

btlegacy · Aug 4, 2014

Gladiator clean up shelf $16.09
http://m.homedepot.com/webapp/wcs/s...eId=10051&catalogId=10053&productId=204280766

legenddc · Aug 7, 2014

My Home Depot had the Black and Decker Matrix Impact Driver and Trim Saw for a little over $10. They work the Craftsman Bolt-On products too.

Home Depot Clearance Thread 2014

New member

Well-known member

Well-known member

Well-known member

Active member

Well-known member

Banned

Well-known member

Banned

Banned

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Active member

Well-known member

Well-known member