Home Depot Clearance Thread 2016

[foster025]

None around here, over the last 5 days I have hit almost every HD in my city (some 2 or 3 times), had my buddy hit one out by him, I do not think our HD's are participating in this clearance, the only thing on the clearance rack was low voltage lights that were not appealing at all.

If you're only searching the clearance rack, then you're doing it wrong.

 

[mswol767]

 

[Spn1025]

Yea that one and the beverage cooler are same price I think. I've seen quite a bit available at that price on my weekend travel spree. Doubt I could get it in my car though, not that I need one to begin with.
I'll wrestle it for a penny though lol.

 

[DR99]

I saw them at the 300 mark, then everyone was out getting them for 100. I still managed to grab a generous amount but it did catch a lot of people by surprise.


Sent from outer space using Taptalk.

I knew a new Paslode nailer was coming out but never expected the clearance deals that came with the new model. I think people didn't pay attention to the 300 dollar price as it would go on sale for that price at different times.

 

[wizness]

Was looking for pennies and found this just sitting there. I didn't notice it a couple days ago surprisingly. They might of just put it there who knows

 

[Toofast28]

Just checked the paslode at my store, still full price. No yellow tag at all, scanned full price too. Had about 8 on hand.

 

[Gore]

XP or cf325li

 

[Toofast28]

XP or cf325li

They have both in stock, both full price.

 

[wait4me]

I seriously hate you guys. I checked 7 stores in the last week and the only 325li was a used return that scanned at $249.

 

[ratchet_gear]

I seriously hate you guys. I checked 7 stores in the last week and the only 325li was a used return that scanned at $249.

I had an issue with one yesterday too. They put a hand written tag on it with the sku for the new model when someone returned it. I had them open it up for me and had to tell them that someone pulled the old switch on them by keep the new one and putting an old impulse model in its place. Sad

 

[cheesiepoof]

Here's a couple things I found tonight that I haven't seen posted. I finally found one of the Schlage sets....and accidentally broke a shelf getting it down.

 

[Spoon33]

125 ft. Aquawinder Auto Rewind Hose Reel
http://thd.co/1skH24c

$25.03 now at my store down from $99.00. Took it to SCO and it rang up 25.03, not the penny I was hoping for.

 

[wizness]

Here's a couple things I found tonight that I haven't seen posted. I finally found one of the Schlage sets....and accidentally broke a shelf getting it down.

Bought an edger and weed puller today. Never even saw them before but they had a box with them in one store. Could def use them and for the price, why not.

 

[ShakinLM7]

What's the story on these?:

Honeywell -1-1 Day Programmable Thermostat with Backlight
Model # RTH6450D
Store SKU # 835702

These are yellow-tagged at $15.03 and a date of 10/15/15 but when I check the system, they are still at the 75% off price. Shouldn't these be pennied out by now?

I didn't look up the SKU but I can tell you to stay away from most of the T-stat's at HD. I do HVAC for a living. The Nest t-stat's are junk, and the only Honeywell's I install are the pro's I buy elsewhere. You're better off paying a little more for a t-stat from an AC supply store (if you can find one that will sell to you).
I've bought and sold several dozen t-stats I got on clearance at HD and ended up getting called back within a year on 9 out of every 10 that I installed because they went out...

 

[swoyer]

I didn't look up the SKU but I can tell you to stay away from most of the T-stat's at HD. I do HVAC for a living. The Nest t-stat's are junk, and the only Honeywell's I install are the pro's I buy elsewhere. You're better off paying a little more for a t-stat from an AC supply store (if you can find one that will sell to you).

I've bought and sold several dozen t-stats I got on clearance at HD and ended up getting called back within a year on 9 out of every 10 that I installed because they went out...

I dunno man. My nest works pretty good, I don't really use the learn feature I just wanted the pretty screen.


Sent from outer space using Taptalk.

 

[Hotroddetailer]

Does HD price match online in store? If so will someone post a link to the platform.

Thanks

 

[Thedevilsequal]

Already been posted but for the people in middle NJ inventory. I would love a set but don't have time this week to drive to any with inventory.

View media item 57174
I previously mentioned this but here are the sticky tiles.
View media item 57175

View media item 57176
Think this is old but it popped back up for some reason.
View media item 57178

 

[Wasatch Quad]

Already been posted but for the people in middle NJ inventory. I would love a set but don't have time this week to drive to any with inventory.

View media item 57174
I previously mentioned this but here are the sticky tiles.
View media item 57175

View media item 57176
Think this is old but it popped back up for some reason.
View media item 57178

Did you snag the smartpoint?

 

[kneeman]

That platform was 19.00 on bf. So was the Werner platforms at Lowes. I have both. The hd one is longer but the Werner is a lot stronger and better made.

I'm 175lbs and flex the HD one.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[12three]

Already been posted but for the people in middle NJ inventory. I would love a set but don't have time this week to drive to any with inventory.

View media item 57174
I previously mentioned this but here are the sticky tiles.
View media item 57175

View media item 57176
Think this is old but it popped back up for some reason.
View media item 57178

i looked into those sticky tiles:
https://www.google.com/?gws_rd=ssl#q=home+depot+vinyl+flooring+cancer

apparently they let off chemicals forever... pretty sure no one in their right mind should buy those... though they are tempting and could look ok in some dark areas or basements. not worth it imo.

 

[elronin]

125 ft. Aquawinder Auto Rewind Hose Reel
http://thd.co/1skH24c

$25.03 now at my store down from $99.00. Took it to SCO and it rang up 25.03, not the penny I was hoping for.

I saw two at a store full of bird **** on them..... the reviews are bad on them more then half say they break right away.

 

[stonerado]

If anyone just wants to hunt Schlage handles and can't use an in-store PC, here's all the models that I've been able to find for a penny. Keep in mind that some stores still carry some of these models, so if it has an actual spot on the shelf for a full set of matching, it won't be clearance at that store. But pull out each carton and look at the top to see the model numbers, grab any that don't match and go check the price at self checkout.

Model Number - Model Name and Handle Type
Schlage F10 V SIE 716 WKF - Siena Wakefield hall and closet
Schlage F40 BRW 619 - Broadway bed and bath
Schlage F40 LAT 619 - Latitude bed and bath
Schlage F40 MNH 626 - Manhattan bed and bath
Schlage F51 BRW 619 - Broadway keyed entry
Schlage F51 MNH 626 - Manhattan keyed entry
Schlage F60 V CAM 619 ACC - Camelot Accent front door entry
Schlage F60 V CEN 619 MER - Century Merano front door entry
Schlage FA10 MER 619 - Merano hall and closet
Schlage FA40 V MER 619 - Merano bed and bath
Schlage FB52N V PLY 605 - Plymouth keyed lock set (knob and deadbolt)

Each of the numbers in the model number tell you what type they are. This will help you know what should be on what shelf. I don't have SKU's for all of these because most of the boxes tell you what model name they are. If that model name doesn't match current offerings, it is likely a penny. Grab a yellow ladder and pull that sucker down, open it up and price check. Hasn't failed me yet.

Here's a reference guide for you -
F10 or FA10 = hall and closet
F40 or FA40 = bed and bath
F51 = keyed entry
F60 = front door entry
716 = aged bronze color
619 = satin nickel
626 = satin chrome
605 = bright brass

If anyone happens to find ANYTHING of the Siena Wakefield line, please let me know! I'm looking for 5 bed and bath knobs, a front door entry, 2 keyed entry, and one keyed entry and deadbolt. Happy hunting!

 

[chrisexv6]

I saw two at a store full of bird **** on them..... the reviews are bad on them more then half say they break right away.

Can attest to that.

Costco sold this model (or something very similar) and they worked well for a couple seasons then the plastic gears started slipping, locking up, etc. (yes, we drained and stored them over the winter so they wouldnt freeze and crack)

Complete waste of $$$ IMHO although I did notice they now "recommend" using 5/8" *vinyl* hose. Well, vinyl hoses aren't really that great. I've been using mine with 5/8" rubber hoses so that might be part of the issue, but even at 25.00 I think Id pass.

 

[06GMC5.3L]

If anyone just wants to hunt Schlage handles and can't use an in-store PC, here's all the models that I've been able to find for a penny. Keep in mind that some stores still carry some of these models, so if it has an actual spot on the shelf for a full set of matching, it won't be clearance at that store. But pull out each carton and look at the top to see the model numbers, grab any that don't match and go check the price at self checkout.

Model Number - Model Name and Handle Type
Schlage F10 V SIE 716 WKF - Siena Wakefield hall and closet
Schlage F40 BRW 619 - Broadway bed and bath
Schlage F40 LAT 619 - Latitude bed and bath
Schlage F40 MNH 626 - Manhattan bed and bath
Schlage F51 BRW 619 - Broadway keyed entry
Schlage F51 MNH 626 - Manhattan keyed entry
Schlage F60 V CAM 619 ACC - Camelot Accent front door entry
Schlage F60 V CEN 619 MER - Century Merano front door entry
Schlage FA10 MER 619 - Merano hall and closet
Schlage FA40 V MER 619 - Merano bed and bath
Schlage FB52N V PLY 605 - Plymouth keyed lock set (knob and deadbolt)

Each of the numbers in the model number tell you what type they are. This will help you know what should be on what shelf. I don't have SKU's for all of these because most of the boxes tell you what model name they are. If that model name doesn't match current offerings, it is likely a penny. Grab a yellow ladder and pull that sucker down, open it up and price check. Hasn't failed me yet.

Here's a reference guide for you -
F10 or FA10 = hall and closet
F40 or FA40 = bed and bath
F51 = keyed entry
F60 = front door entry
716 = aged bronze color
619 = satin nickel
626 = satin chrome
605 = bright brass

If anyone happens to find ANYTHING of the Siena Wakefield line, please let me know! I'm looking for 5 bed and bath knobs, a front door entry, 2 keyed entry, and one keyed entry and deadbolt. Happy hunting!

I have been taking pictures of the overheads and searching every SKU in the PC.

 

[stonerado]

I have been taking pictures of the overheads and searching every SKU in the PC.

That's what I do if there isn't a visible model name. I'll usually just try to match the overhead to below and anything that doesn't match I'll check the PC. But that guide is for anyone who can't access a PC for some reason.

 

[chrisexv6]

It looks like all of the stores around me did their Schlage reset a while ago. None of the older handles are here anymore. Would have been cool to get an entry set for a penny but I cant find any.

Also found a store that actually had a shelf sticker for the Paslode clearance. It was half torn off so I couldnt get the date on it but pretty sure it was for the 100.03 price. There were none left, of course.

 

[GasEngineer]

Already been posted but for the people in middle NJ inventory. I would love a set but don't have time this week to drive to any with inventory.

View media item 57174
I previously mentioned this but here are the sticky tiles.
View media item 57175

View media item 57176
Think this is old but it popped back up for some reason.
View media item 57178

Those darn Husky 12 piece sets keep getting me. They have a few in the clearance racks and they are still ringing up at $30.06 around here.

 

[Thedevilsequal]

Did you snag the smartpoint?

The one thing I wanted, but I can never find any nailers in this store. Their inventory is way off and I don't think they ever clear the displays out of inventory.

 

[06GMC5.3L]

Those darn Husky 12 piece sets keep getting me. They have a few in the clearance racks and they are still ringing up at $30.06 around here.

One local store shows 3 of ea the metric and SAE. Haven't looked for them, but they aren't in a clearance section so they must be in the overhead. Don't really need them unless I grab them for a penny.

 

[RRich]

One local store shows 3 of ea the metric and SAE. Haven't looked for them, but they aren't in a clearance section so they must be in the overhead. Don't really need them unless I grab them for a penny.

I think they're 12 pts sockets. That kills it for me.

 

[schmelpboy]

I dunno man. My nest works pretty good, I don't really use the learn feature I just wanted the pretty screen.


Sent from outer space using Taptalk.

9 out of 10? Then I'd blame the installer. I've had 4 NEST for 3 years now, not a hiccup, and I'm a DIY.

 

[danwolfgang]

The 10" tool bags from BF are now down to $2.88 (from $5.88). I've been waiting for these to drop so I could ****** a bunch of them. They'll be good for odds and ends and even to have on-hand to give to someone that might need one.

 

[Gore]

If anyone just wants to hunt Schlage handles and can't use an in-store PC, here's all the models that I've been able to find for a penny. Keep in mind that some stores still carry some of these models, so if it has an actual spot on the shelf for a full set of matching, it won't be clearance at that store. But pull out each carton and look at the top to see the model numbers, grab any that don't match and go check the price at self checkout.

Model Number - Model Name and Handle Type
Schlage F10 V SIE 716 WKF - Siena Wakefield hall and closet
Schlage F40 BRW 619 - Broadway bed and bath
Schlage F40 LAT 619 - Latitude bed and bath
Schlage F40 MNH 626 - Manhattan bed and bath
Schlage F51 BRW 619 - Broadway keyed entry
Schlage F51 MNH 626 - Manhattan keyed entry
Schlage F60 V CAM 619 ACC - Camelot Accent front door entry
Schlage F60 V CEN 619 MER - Century Merano front door entry
Schlage FA10 MER 619 - Merano hall and closet
Schlage FA40 V MER 619 - Merano bed and bath
Schlage FB52N V PLY 605 - Plymouth keyed lock set (knob and deadbolt)

Each of the numbers in the model number tell you what type they are. This will help you know what should be on what shelf. I don't have SKU's for all of these because most of the boxes tell you what model name they are. If that model name doesn't match current offerings, it is likely a penny. Grab a yellow ladder and pull that sucker down, open it up and price check. Hasn't failed me yet.

Here's a reference guide for you -
F10 or FA10 = hall and closet
F40 or FA40 = bed and bath
F51 = keyed entry
F60 = front door entry
716 = aged bronze color
619 = satin nickel
626 = satin chrome
605 = bright brass

If anyone happens to find ANYTHING of the Siena Wakefield line, please let me know! I'm looking for 5 bed and bath knobs, a front door entry, 2 keyed entry, and one keyed entry and deadbolt. Happy hunting!

I'm lookin' for ya man. I'm striking out big time in CA.

 

[Poop Man]

Found these HDX plastic cabinets clearanced in the storage section for $12 (normally $79) Showing full price at all the other locations near by.

 

[Poop Man]

Also a great deal on the Ridgid 4amp battery with charger (they've dropped this $20 over the past two weeks. If you pair it with the Dewalt DCK296M2 you end up paying like $38 after tax. Just return the dewalt set up. Killer deal if you have any of the Ridgid 18v line.

 

[Thedevilsequal]

One local store shows 3 of ea the metric and SAE. Haven't looked for them, but they aren't in a clearance section so they must be in the overhead. Don't really need them unless I grab them for a penny.

At 10$ I think they are a steal. But yeah a penny would be better.

Many store locally have the SAE at the 10 level and the metrics are still are 30. Wierd but

 

[06GMC5.3L]

At 10$ I think they are a steal. But yeah a penny would be better.

Many store locally have the SAE at the 10 level and the metrics are still are 30. Wierd but

Ya, I just don't "really" need it. Will try and find them next time I am there and see where they are hiding.

 

[HotRodHudson]

Saw this on deal news not bad for a buck.

 

[elronin]

Saw this on deal news not bad for a buck.

Yea Slick Deals has a bunch of Home Depot stuff on the front page the 46 Inch Husky bottom tool Cabinet down to $189 from $299

 

[openwheelracing88]

Milwaukee M18 Fuel Brushless Hammer Drill/Impact Driver Combo with hard case $231.86 You are welcome.