Home Depot Clearance Thread 2016

[01Snake]

Exactly. Why ***** about people buying penny items when they leave the clearance stuff in the overhead instead of putting it out in the clearance section. If they did their job, everything that is half decent would sell at the .03 level.

That and they have to actually update the price tags, which is very rare.

This is rampant in my area. There is next to no clearance stickers on anything except junk.

 

[ghettogarage]

I had the same thing happen to me, had both barcodes on it. It was a reconditioned framing nailer and rang up for $100.03. I asked for a discount being reconditioned and they sold it to me for $70. But now that the framing nailer is a penny I would try SCO if you can scan that barcode.

Ya the barcode is under the 546 sku ($399), I'm almost sure of it. If the barcode didn't work and they had to type in a sku, then it'd probably show penny but it's hit or miss with the people who let me out the door with penny items at this HD

 

[Hayzuse]

It's a gamble, it will drop in price to 250, probably very soon,


Sent from my SCH-I545 using Tapatalk

I have 3 Home Depots by work I'm going to check tomorrow and see what they have I will just have to keep checking every couple days and see if I get lucky


Sent from my iPhone using Tapatalk

 

[rednotch]

Port a torch finally dropped here in south jersey. they had them pretty damn hidden too but I found them buried on a top shelf. funny how they where in the welding isle until they started to drop, then got shuffled around the store the past three weeks. I found someone's hidey hole lol bunch of Ryobi clearance stuff hidden with them also. Don't have any ryobi so I left them behind.

noticed the jacks dropped also, some one got the 3 this store had a few days ago.

The 7x7 tent hasn't dropped that cheap here and no stock Didn't find anything that stuck out to me in the price app, was pretty much closing time so I didn't search too many things. Most of the stuff I saw is listed.

 

[swoyer]

Port a torch finally dropped here in south jersey. they had them pretty damn hidden too but I found them buried on a top shelf. funny how they where in the welding isle until they started to drop, then got shuffled around the store the past three weeks. I found someone's hidey hole lol bunch of Ryobi clearance stuff hidden with them also. Don't have any ryobi so I left them behind.

noticed the jacks dropped also, some one got the 3 this store had a few days ago.

The 7x7 tent hasn't dropped that cheap here and no stock Didn't find anything that stuck out to me in the price app, was pretty much closing time so I didn't search too many things. Most of the stuff I saw is listed.

Damn. Which store did you hit lol. That's my weds route haha


Sent from outer space using Taptalk.

 

[rednotch]

Damn. Which store did you hit lol. That's my weds route haha


Sent from outer space using Taptalk.

lawnside my main store. told my brother so he might be grabbing one also tomorrow. if you hit it, someone has a hidey hole in the auto section also.

 

[JesseJDE]

Anyone have any luck selling the Shed in a Box 7x7x7? Couldn't find them online but saw today the one store near me as a bunch of them instock for $24 via PCA

 

[emachado]

Got this for $29.00, this is not sold in Puerto Rico, but kiosk said there were 2 for 29.00 each, I got one!!!

http://www.homedepot.com/p/Ryobi-Miter-Saw-Stand-Green-A18MS01G/205642391

Also this is not sold in Puerto rico, there are 7 in my store $99.00 yellow sticker
http://www.homedepot.com/p/Husky-4-6-Gal-Portable-Electric-Air-Compressor-4610A/205532432

This also not sold in PR, kiosk say there are 2 in store for $99.00 http://www.homedepot.com/p/DEWALT-2...Quiet-Trim-Air-Compressor-DWFP55130/205117108

 

[mattoehler]

The score for today[emoji106]

Sent from my HTC6525LVW using Tapatalk

 

[tharrison57]

Went to the Jacksonville, Il Home Depot today. Although I'm usually partial to the yellow & black boxes, I passed on these.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[tharrison57]

But, I thought I'd try some red ones .

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[DumpyTHRASHER]

First post on here. I've been aware of penny deals for quite some time but think its awesome that there is a decent sized following. I stopped a store yesterday looking for some last minute Valentine's day presents. Found the exact items but only one or two of each. Checked a different store tonight and hit the mother lode haha, more so there was even more of some of the items up high out of reach but it was snowing and didnt want to tempt fate. The manager was called but he approved the transaction. Luckily I had a friend with me to help with the carts. He went out to the truck to grab something when the manager was there. Something did happen though that was quite concerning, when my friend was walking back in through the exit the after manager had approved the transaction he walked out the entrance around to the exit and took a picture of a random guys license plate. Going to guess he thought it was mine lol. Has anyone else had this experience? What possible information could he have hoped to have gotten from taking that picture? He probably just did it because the store was dead and he might have been a little angry.
Happy hunting guys!

 

[emachado]

Have fun with the garden

 

[gumme]

Found a Fusion Shed today. Store showed one in stock, they actually had 2. $250.03. They even let me use a 20% off coupon, which knocked $50.00 bucks off. Buy now, think later! Now I have to figure out how to get the thing home!
When these finally drop to a penny, good luck getting it thru the SCO!!!!
Bye the way,thanks for the sku on the generator.

 

[dacan23]

Seems all I see is the clear, few tans. One store in Warwick RI today had like 6+ clear kits for $20 I think.

Anybody have any of the epoxy clear kits?

 

[dacan23]

How big is the box and how much does it weigh does anyone know? I know 2 stores that have it for 250 and another store that has 2 at full price.

Tempted

 

[jakedi99]

How big is the box and how much does it weigh does anyone know? I know 2 stores that have it for 250 and another store that has 2 at full price.

It weighs 550. Need at least 3 people in good shape to lift it. Box was about 6x8 I think? Some one may have an exact measurement.


Sent from my iPhone using Tapatalk

 

[dacan23]

Thanks! Holy **** 550lbs in one box! Prolly not an issue at the store, assume they fork it on whatever truck/trailer you have. But unloading at home and storing until spring.... Thinking I would drop it in the driveway, cover it in a tarp until spring...

It weighs 550. Need at least 3 people in good shape to lift it. Box was about 6x8 I think? Some one may have an exact measurement.


Sent from my iPhone using Tapatalk

 

[jakedi99]

Thanks! Holy **** 550lbs in one box! Prolly not an issue at the store, assume they fork it on whatever truck/trailer you have. But unloading at home and storing until spring.... Thinking I would drop it in the driveway, cover it in a tarp until spring...

They used the fork lift to put it on one of their flat beds for me. Buddy and I pushed it off and covered with a tarp. Was definitely a pita so make sure you have help.


Sent from my iPhone using Tapatalk

 

[spent]

What 20% off coupon did you use? I have one waiting for me to pick up as well and I'm still game planning on how to get it off a truck and how to store it without harming it.

 

[red]

Never mind the first cup of coffee still hasn't kicked in yet

 

[JR4815D2]

Port a torch finally dropped here in south jersey. they had them pretty damn hidden too but I found them buried on a top shelf. funny how they where in the welding isle until they started to drop, then got shuffled around the store the past three weeks. I found someone's hidey hole lol bunch of Ryobi clearance stuff hidden with them also. Don't have any ryobi so I left them behind.

noticed the jacks dropped also, some one got the 3 this store had a few days ago.

The 7x7 tent hasn't dropped that cheap here and no stock Didn't find anything that stuck out to me in the price app, was pretty much closing time so I didn't search too many things. Most of the stuff I saw is listed.

How much did it drop? Wanna get one, but everyone around me is full price.

Sent from my SM-G900V using Tapatalk

 

[tosainu1]

Is this a good saw?

 

[CNGsaves]

^ ^ ^ Worm drive Skilsaw . . . . yes, that is powerful saw but still overpriced.

I'd be interested if price drops further.

 

[mswol767]

Don't need but to big to flip

 

[f575gtc]

Did they have any of those rubber maid sheds left? and which location? I could use one!

 

[Wasatch Quad]

Is this a good saw?

Great for a timber framer.

 

[swoyer]

Is this a good saw?

I'd like everyone to take note. This is a good contribution example. Picture with clear sku and easily identifiable box.


Good work sir. I'll keep my eye on this, I really like these just super expensive. If they ever go. .03 I'd buy one.


Sent from outer space using Taptalk.

 

[chrisexv6]

I'd like everyone to take note. This is a good contribution example. Picture with clear sku and easily identifiable box.


Good work sir. I'll keep my eye on this, I really like these just super expensive. If they ever go. .03 I'd buy one.


Sent from outer space using Taptalk.

One of my local stores has it down to 100.00 (no .06 or .03 pricing yet). Not sure if they actually have the one in stock that they claim, though

As far as its usefulness....I have the Bosch version of it. Its heavy, but pretty much can cut through anything.

I figure Ill use my 6.5" cordless (Milwaukee FUEL) for most stuff and for whatever that doesnt work for Ill whip out the worm drive.

 

[ShakinLM7]

For the record the main purpose of my trip was not to buy a Generator, Just took advantage of any spare time at HD's I found along the way.

 

[rvieceli]

Want to point out that Skilsaw is a beast. It's a 10 1/4 inch blade. It will cut a 4x4 in one pass and have some depth left. It is not a regular circular saw. It also weighs 16.5 lbs

 

[Thedevilsequal]

Is this a good saw?

Pretty sure that saw clearanced out a few months ago as I bought one when they dropped to $120.00. Surprised to still see it. Looks like the date is from September? Did you ring it out and see what price came up?

 

[f575gtc]

edit

 

[chrisexv6]

Want to point out that Skilsaw is a beast. It's a 10 1/4 inch blade. It will cut a 4x4 in one pass and have some depth left. It is not a regular circular saw. It also weighs 16.5 lbs

Not 10.25, 7.25

The Bosch version I have weighs about 14 lbs, I think the Skil is similar.

 

[swoyer]

Not 10.25, 7.25



The Bosch version I have weighs about 14 lbs, I think the Skil is similar.

There's two versions. There's the "big" skil saw and this one. Same design, different blade sizes. The big one is obviously huge.


Sent from outer space using Taptalk.

 

[chrisexv6]

There's two versions. There's the "big" skil saw and this one. Same design, different blade sizes. The big one is obviously huge.


Sent from outer space using Taptalk.

I see that now....and one of the stores in my area supposedly has one. Not on clearance but hell Id go there just to look at the gigantic thing!

 

[Wasatch Quad]

Not 10.25, 7.25

The Bosch version I have weighs about 14 lbs, I think the Skil is similar.

You may want to look again.
http://www.homedepot.com/p/SKILSAW-...e-Saw-SPT70WM-22/205673452?keyword=1001260392

 

[chrisexv6]

You may want to look again.
http://www.homedepot.com/p/SKILSAW-...e-Saw-SPT70WM-22/205673452?keyword=1001260392

Nice, you are right! I hadnt clicked the pic from the latest post.

The 7.25" has been on clearance for a while, technically, but I never found one...I didnt realize they were clearing out the gigantic one too (actually didnt realize any stores actually carried it!)

200.00 is probably a good price but I dont need to be chopping telephone poles to length so its a little too much saw even for me

 

[f575gtc]

if that skill is on clearance I can use it for cutting long firewood down to size.

 

[06GMC5.3L]

if that skill is on clearance I can use it for cutting long firewood down to size.

You're kidding right?