Slupie
Well-known member
ego 20" mower Item # 1000-032-201 $374.00, Naperville, Il store on RT 59 &75th St. had two this morning
Home Depot Clearance Thread 2016
- Thread starter ratchet_gear
- Start date
- Status
Anyone else find few to no stores with the 27" and 26" husky tool cabinets on clearance around them? I could have sworn the city I was in on Monday all the stores had them at .03. When I checked all my home stores one 1 had them on clearance. Rest are full price. Picked up 4 tops and 4 bottoms. Already have 3 pairs sold. Need more as none of my stores have the 41" or 52" boxes in stock.
Also I know it's been said but what are ya'll pricing the 30 gal compressor at? Finally found one and grabbed it this morning. Thanks.
Sent from my iPhone using Tapatalk
Also I know it's been said but what are ya'll pricing the 30 gal compressor at? Finally found one and grabbed it this morning. Thanks.
Sent from my iPhone using Tapatalk
Same store I was at earlier showed 1 16" homelite in stock. Had to have someone help me find it as it was buried up top without the cardboard sleeve. Turns out it was used (very lightly from what I can tell) and returned. Showed customer service a pic of it from the PCA and she took the 36.03 clearance price and knocked another 20% off. $30 out the door. 
Attachments
They are metal. I bought a few.
except when it is not, these are metal, to bolt onto the metal box they were made for.
masters
Well-known member
I was more worried about the weight cause I had to get on my tippy toes and "tap" it to the edge where I could get a hand on it then bring it down. The box was not heavy at all. Just didn't want to take a chance of it falling on my head if it was heavy.
grizzlyjmg
Well-known member
- Joined
- Feb 21, 2015
- Messages
- 157
Bought six boxes yesterday at my local store (went looking for the 52 Husky and/or Dewalt Tool Boxes - no such luck). Employee went up into the rafters to retrieve same as it was definitely higher than I could reach even with the yellow ladder. First thing he did was scan it and gave me a big "**** eating" grin about the good price. Have worked with this employee before and he seems to be not only friendly but also doesn't seem to worry about whether or not an item is a penny or not. Asked him if he thought I would have any problems getting through the SCO and he stated "he hoped not....".
Took all six boxes to the SCO - which was quite busy at the time. Unfortunately the attendant saw me and immediately offered to scan the boxes for me. As soon as she does, she notes that each box is a penny. Tells me that she can not sell it to me. Tell her that her statement is contrary to HD Corp Policy. She calls the MOD, who tells her that they can not sell it. I again offer company policy and the next offer I received was I could buy it at the last clearance price. Again, I told her I would rather pay a penny, and she relays the message to the MOD. Finally he tells her to sell it to me for a penny (whole discussion took less than 5 minutes - might have helped that I snapped a picture of the check-out screen showing items at a penny each). Paid my .06 and walked. Would have rather of found the tool box, or another compressor (found one of the Husky 4.5 Gallon Silent compressor at the store last week (at the time I purchased mine they had another 9 sitting on the floor and in the rafters, but I was told by the employee that they were all sold out approximately 2 hours later when one person came in and bought all 9 - hope he can sell them....).
Last edited:
Is that Dewalt Toolbox SKU: 1001564576 ?
stonerado
Well-known member
Offering them to friends and family before flipping them. $5.03 for the xenon and $7.53 for LED. This store had the same 816766 weather station back to full price with new packaging. Also saw this in tool rental -
Those look like the new ones
Are these the compressors that are on sale?
Sent from my iPhone using Tapatalk
Sent from my SM-G900V using Tapatalk
gatorheel
New member
I found a one last night (at $110.03, my first .03!) and was just reading the instructions today. It's model C302H, so things may have have changed, by the break-in instructions don't say anything about changing the oil. They just tell you to open the drain valve, run it for 20 mins, close the valve, and you're good to go. In fact, although there are instructions (in maintenance) for draining/refilling the oil, they never say when you'd need to do this. I assumed they'd have some guidance like after every x hour of operation or number of years...
BTW, the second best thing to finally finding an .03 was the guy's reaction behind me at SCO. It wouldn't scan, so I was up at the center area getting it manually entered. When I came back to get it, the guy waiting said "That's a really nice compressor!" When I showed him the card w/ the price on it, his jaw just about hit the floor. I saw him in the parking lot and he said he went to go see if there were any more (obv not or I would have had them all)
Matt
theres no way to tell til you open it.
i have a c301h, a c302h, and a mystery box
the 301 and the 302 look identical. the 301 says 135psi, the 302 says 155psi. thats the only discernable difference to the naked eye. the book for the 302 says something about being quiet, the book for the 301 says nothing about being quiet.
krouchchocolate
Well-known member
- Joined
- Sep 25, 2011
- Messages
- 265
Do u guys ever feel bad for buying all of them? Sometimes when someone helps me out I usually ask them if they need one for themselves that way I leave them the last one so they can purchase it. Granted it is their job to help out a customer, but if they helped me look left and right for a specific item then it is a different story.
swoyer
Well-known member
http://www.homedepot.com/p/DEWALT-5...abinet-Combination-Yellow-DWMT74952/206153266
none provided, gotta check the computer. I didn't think about it when I was there.
This is weird. Have you guys ever been contacted by a manufacturer when selling products online? I put up some Seek thermal imagers for sale on Amazon (wasn't getting any hits on ebay) priced much lower than any other sellers. Within a day or two, someone from the manufacturer messaged me stating I wasn't an authorized seller and to contact him with my info so I could become one. Didn't bother responding. A few minutes ago I got an e-mail notification that he just bought the 2 I had put up for sale. There's also at least 2 other sellers that are missing from the product page, so I assume all their inventory got bought out as well.
If you are not an authorized dealer you cannot sell them as "new" on amazon, you need to sell them as "like new".
$190 + $4.99 shipping. The next lowest priced seller was at $199 (with free shipping) along with 1 or 2 more below the $220 mark.
Relist for how much?
Same price, but with a note stating they're actually new and unopened
Found two 52 inch husky boxes today up in the rafters. Now need to need to find a way to get them out of the store without fighting with the manager
Scouted every store in my area could not find the 27 inch seven drawer husky boxes whatsoever
Sent from my iPhone using Tapatalk
Scouted every store in my area could not find the 27 inch seven drawer husky boxes whatsoever
Sent from my iPhone using Tapatalk
Same price, but with a note stating they're actually new and unopened
Why not jack the price up and let them buy again?
Spn1025
Banned
Are these Husky 52" boxes at penny status? Thought they were like $120.03? Why should it be a fight to get them at .03?
swoyer
Well-known member
Same price, but with a note stating they're actually new and unopened
Send them a box of yellow paper lol
on that one too. Get it down, pay the .03 price and go home. What's the problem?Map pricing, there looking for counterfeit products. This is why most companies will not honor warranty on ebay and amazon purchases.
pretty sure this deal is today only
http://www.homedepot.com/p/EGO-480-...ion-Cordless-Electric-Blower-LB4801/204753716
http://www.homedepot.com/p/EGO-480-...ion-Cordless-Electric-Blower-LB4801/204753716
Saw it advertised in store today...didnt look like a one-day-only thing though
The.Handyman
Well-known member
Just sold one of the DeWalt quiet trim compressors for $180 using OfferUp. Quick and easy flip.
Sent from my SM-G900P using Tapatalk
Sent from my SM-G900P using Tapatalk
I think the 2.0Ah would work out just fine, especially in brushless.
I have the 4.0Ah batteries for my Ryobi stuff, but its not brushless so a little less efficient on battery usage.
I havent found the 200.00 DeWalt kit yet...I believe that comes with the bigger batteries, but also the less compact tools.
- Status