Home Depot Clearance Thread 2016

krouchchocolate · May 21, 2016

yosh2000 said:
Got one of those husky workbenches for a penny. Cashier lady high fived me, said it's my lucky day and to go get the rest of them (unfortunately I got the last one) and she'll ring me right up! Shocking how lucky that was!

Are u talking about the 6' workbenches with the stainless steel table?

DumpyTHRASHER · May 21, 2016

Was in a box that weighed at least 60 pounds I had someone take down from the overhead. Had MARKDOWN written on the side with a huge frowny face drawn on it lol. Full of penny items but most of it was complete junk worthy of the dumpster. Didn't find the .02 items I was looking for but a good pickup haha

Sent from my SM-G930V using Tapatalk

jits1980 · May 21, 2016

cdmd2b said:
Just a big box (cardboard box not plastic case that they normally come in). I'm not sure what is inside the box. After reading reviews on HD.com it very well might be because people say they are missing like 30 pieces and such.

This will give you idea how bad my HD is. When trying to look for them lady on MET team came up and asked what I was looking for. Since it wasn't penny, I told her. She said we haven't sold one in 16 months and we don't have them. Our count is off and they don't exist. She typed in on her portable pca and when I went back to pca 10 minutes later the inventory was zeroed out. Weird thing is after I buy them the inventory didn't go into the negative, but stayed at 0...

Long story short, found them after hour of looking. Sad that they haven't sold one in over a year and it still not pennied out or out of system. So jealous of the deals I see people post.

Sent from my SM-N920V using Tapatalk

Do you have picture of box?

nohcho · May 21, 2016

Went back to the store to get rest of those Ridgid stainless vacs, there were 6 when i left yesterday. Today the store was picked clean.

Sent from my LG-H830 using Tapatalk

Firefighter1406 · May 21, 2016

djr715 said:
Is this the Paslode 325li that was on clearance earlier this year?
Very top left of the picture

Sku on the case is 1000054734 and is not in the PCA

Pretty sure the case is the same but am wondering if it has the wrong sku or if it's the model before this one:

Sent from my iPhone using Tapatalk

Hope this helps a little. The CF325LI was last years model as you said. The top of the case where the handle is and the side has a slight rounded edge look on them. I just bought the new version CF325XP and the case is totally squared off on all corners. Hope this helps some of you lucky suckers that are finding these guns. Those look like the older case to me from a distance. You can see the difference on the cases if you look closely at the case on the next shelf down which is the new model.

cdmd2b · May 21, 2016

jits1980 said:
Do you have picture of box?

Put them in attic until thanksgiving when I will give them out as Christmas gifts. Will try and go up there and take pic.

Sent from my SM-N920V using Tapatalk

csmitty · May 21, 2016

yosh2000 said:
Got one of those husky workbenches for a penny. Cashier lady high fived me, said it's my lucky day and to go get the rest of them (unfortunately I got the last one) and she'll ring me right up! Shocking how lucky that was!

I wish that was the policy. I had to cease yesterday after getting 4 more pegboards as the sco cashier was getting leery. Figured I was pushing my luck. I could only do one at a time quickly since it was 21 lbs.

Makes me wonder since they're only sold online now if online sales pull from store inventory or if it's only warehouse. I know Sears does that shipping from other stores with it in stock when buying online.

DanielSimpsonDay · May 21, 2016

csmitty said:
I wish that was the policy. I had to cease yesterday after getting 4 more pegboards as the sco cashier was getting leery. Figured I was pushing my luck. I could only do one at a time quickly since it was 21 lbs.

Makes me wonder since they're only sold online now if online sales pull from store inventory or if it's only warehouse. I know Sears does that shipping from other stores with it in stock when buying online.

When they stop selling it in the stores, it will say sold online only afterwards. If you buy it online now, it will be sent from a warehouse, not from any stores.

I wish my penny item was the workbench not the plastic utility box but oh well.

Tim_P · May 21, 2016

Anybody need a switch to go with a Nutone install

csmitty · May 21, 2016

For all those shippers.

ghettogarage · May 21, 2016

Anyone in need of a passlode in Oregon/Washington? I need to trade for a floor nailer.

kneeman · May 21, 2016

ghettogarage said:
Anyone in need of a passlode in Oregon/Washington? I need to trade for a floor nailer.

Sell it and buy a floor nailer and keep the extra cash.

Jeepster425 · May 21, 2016

To the guy that said those milwaukee m12 kits aren't on sale in washington, wrong! Moses lake has 3 more

Sent from my SCH-I545 using Tapatalk

djr715 · May 21, 2016

Firefighter1406 said:
Hope this helps a little. The CF325LI was last years model as you said. The top of the case where the handle is and the side has a slight rounded edge look on them. I just bought the new version CF325XP and the case is totally squared off on all corners. Hope this helps some of you lucky suckers that are finding these guns. Those look like the older case to me from a distance. You can see the difference on the cases if you look closely at the case on the next shelf down which is the new model.

I didn't know that the older ones had a different case until a month ago. They look very similar to those of the angled nailer or whatever it's called. I've only been able to find three and the thing that always made them stand out to me is the black sticker in the middle of the box:

M4A1Carbine · May 21, 2016

The Paslode nailers here are $260, and the Husky work lights are still $24.

drwheels · May 21, 2016

Ridgid battery sander at $35 half off. i bought a roll of 10/3 for $46. Knipex still at regular price.

Zochung · May 21, 2016

drwheels said:
Ridgid battery sander at $35 half off. i bought a roll of 10/3 for $46. Knipex still at regular price.

which OKC stores has the Knipex

rednotch · May 21, 2016

UnkleMike said:
Find both of these, *AFTER* being told that somebody else bought them the other day, and the guy telling me he was pi$$ed that the customer took both. He was even more pi$$ed when I had him get these two down, from two different aisles.

SKU: 1000005206
Desc: Husky 2 Shelf Utility Cart

Sent from my XT1095 using Tapatalk

Anyone know if these where all stores clearance or just select stores, Saw a few of them in the rafters at a local store but nothing in the PCA so it may have pennied out, didn't have time to have someone get them down and try my luck thought.

DanielSimpsonDay · May 21, 2016

rednotch said:
Anyone know if these where all stores clearance or just select stores, Saw a few of them in the rafters at a local store but nothing in the PCA so it may have pennied out, didn't have time to have someone get them down and try my luck thought.

Not 100% sure they are the same but the ones in the stores near me are full price. I think $89.

Tim_P · May 21, 2016

M4A1Carbine said:
The Paslode nailers here are $260, and the Husky work lights are still $24.

That's the Paslode XP model correct?

kneeman · May 21, 2016

No. The xp is new. Probably the the finish nailer

drwheels · May 21, 2016

DanielSimpsonDay said:
Not 100% sure they are the same but the ones in the stores near me are full price. I think $89.

Still at $89 around here.

BillMoney · May 21, 2016

Tim_P said:
Anybody need a switch to go with a Nutone install

Those finally went to .03. Some idiot bought it at .00 at my home store

csmitty · May 21, 2016

Opened up one of the KO kits to inspect it.

Awesome. For a penny whatever I guess. Someone bought a Klein and put their old greenlees in it and returned it. Dbags. The 1" is cracked in half and the pressure screw is striped. Debating wether to replace those parts and use it. Maybe like $60. Or return it on my .03 receipt. Guess I could sell both new ones and keep the greenlee. Won't need it a ton.

Tim_P · May 21, 2016

csmitty said:
Opened up one of the KO kits to inspect it.

Awesome. For a penny whatever I guess. Someone bought a Klein and put their old greenlees in it and returned it. Dbags. The 1" is cracked in half and the pressure screw is striped. Debating wether to replace those parts and use it. Maybe like $60. Or return it on my .03 receipt. Guess I could sell both new ones and keep the greenlee. Won't need it a ton.

I wouldn't try to return, you'll get the only super employee that opens it to check it out, then you'll be the dbag

Ole Slewfoot · May 21, 2016

No pennies, but I feel like I won.
Robo cashier not taki g cash today, ther is one more thing to try for.

UnkleMike · May 21, 2016

rednotch said:
Anyone know if these where all stores clearance or just select stores, Saw a few of them in the rafters at a local store but nothing in the PCA so it may have pennied out, didn't have time to have someone get them down and try my luck thought.

I've been to 8-10 other stores, and they all have these carts at full price.

Sent from my Nexus 7 using Tapatalk

Rcajun · May 21, 2016

4 of the 50' hoses today for $7, only 59 left!

M4A1Carbine · May 21, 2016

kneeman said:
No. The xp is new. Probably the the finish nailer

Correct, 16 ga cordless.

g00b86 · May 21, 2016

Sent from my iPhone using Tapatalk

g00b86 · May 21, 2016

Sent from my iPhone using Tapatalk

g00b86 · May 21, 2016

Sent from my iPhone using Tapatalk

g00b86 · May 21, 2016

Can't tell if either of these are the 325Li PCA shows them zero' is out.

Sent from my iPhone using Tapatalk

nrinau1 · May 21, 2016

g00b86 said:
Sent from my iPhone using Tapatalk

Home depot has a promo going on for paint. That 5 gal duo may qualify for $40 mail in rebate.

Good until 5/30/2016

http://www.homedepot.com/c/Paint_Offers

DanielSimpsonDay · May 21, 2016

^ Those look like the newer version but only one way to know for sure.

Spn1025 · May 21, 2016

g00b86 said:
Can't tell if either of these are the 325Li PCA shows them zero' is out.

Sent from my iPhone using Tapatalk

I can't tell, your pics aren't very good, but it looks like those might be the new XP judging by the sharp corners vs rounded corners for the 325Li.

jakedi99 · May 21, 2016

g00b86 said:
Can't tell if either of these are the 325Li PCA shows them zero' is out.

Sent from my iPhone using Tapatalk

Between you and drtj I'm going to take the 325LI I got for a penny on Tuesday and start driving nails into my own head

Wbrzo16 · May 21, 2016

Something to possibly keep an eye on.

jmrudden · May 21, 2016

nrinau1 said:
Home depot has a promo going on for paint. That 5 gal duo may qualify for $40 mail in rebate.

Good until 5/30/2016

http://www.homedepot.com/c/Paint_Offers

As far as I can tell all of the ones on clearance are called out in the exception list

JesseJDE · May 21, 2016

jakedi99 said:
Between you and drtj I'm going to take the 325LI I got for a penny on Tuesday and start driving nails into my own head

Home Depot Clearance Thread 2016

Well-known member

Well-known member

Well-known member

Active member

Well-known member

Well-known member

Well-known member

Banned

Banned

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

New member

Well-known member

Banned

Banned

Well-known member

Well-known member

Well-known member

Well-known member

Banned

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Active member

Banned

Banned

Well-known member

Well-known member

Attachments

Active member

Banned