To avoid these ads, REGISTER NOW!

ICON 73" with hutch and two side lockers

To avoid these ads, REGISTER NOW!
P

prone2xl

Well-known member
Joined
Apr 17, 2019
Messages
75
Location
MS
Mike have enjoyed reading this thread and sympathize with your story! Sending blessings up your way and a quick recovery. The setup looks glorious and Cherry! I'm sure this whole thing will leave u with memories to come! loving the drawer setup also and I'm also a Dewalt power tool guy and a sucker for tools and tool boxes/ metal storage in general even tho I don't turn wrenches for a living... heal up partner!
 
OP
M

MIke.Gradoz

Well-known member
Joined
Feb 7, 2022
Messages
75
prone2xl said:
Mike have enjoyed reading this thread and sympathize with your story! Sending blessings up your way and a quick recovery. The setup looks glorious and Cherry! I'm sure this whole thing will leave u with memories to come! loving the drawer setup also and I'm also a Dewalt power tool guy and a sucker for tools and tool boxes/ metal storage in general even tho I don't turn wrenches for a living... heal up partner!
Click to expand...
Thanks for the well wishes, really appreciate it! Like you I love me some Dewalt, I do have one Milwaukee tool its a PVC Cutter, Thanks again!
 
OP
M

MIke.Gradoz

Well-known member
Joined
Feb 7, 2022
Messages
75
So I finally got my Kobalt move into the icon and most of my stackon
 

Attachments

  • image.jpg
    image.jpg
    338.1 KB · Views: 159
M

Mr. D

Well-known member
Joined
Mar 28, 2006
Messages
197
Location
N. Alabama
purplezr2 said:
For that kind of money you could buy used Snap On. I bought my 84" Epiqfor 4500, I'm guessing you could find a decent deal on a decent sized Epiqwith lockers for 8400.
Click to expand...

No you can't, you're are not buying a new Snap On roll cab with a hutch SS top and two side lockers for $8,400, maybe $16,000.
 
OP
M

MIke.Gradoz

Well-known member
Joined
Feb 7, 2022
Messages
75
Mr. D said:
No you can't, you're are not buying a new Snap On roll cab with a hutch SS top and two side lockers for $8,400, maybe $16,000.
Click to expand...
Actually after my 20% discount, I was all in for $6700. Be hard to by used snap on in a comparable configuration for that kind of money
 
M

Mr. D

Well-known member
Joined
Mar 28, 2006
Messages
197
Location
N. Alabama
purplezr2 said:
Did I say new?
Click to expand...

No but I was comparing apples to apples. A used Snap On at a cost point that can compared to a new ICON is still hard to find. People selling used professional boxes think that have gold in their garage. Asking prices seem to run around 3/4 the cost of new.

There are some deals to be had if someone is ready to jump and travel, on FB Marketplace there is a 72" "Never Used" KLR7023APCM2 Roll Cab and KLR7972APCM Hutch for $6,500. Pretty good deal, MSRP on Snap On website for like item is $20K.
 
T

Ton ton

Well-known member
Joined
Oct 16, 2019
Messages
4,592
Location
Page County,VA
MIke.Gradoz said:
So on Sunday, there I was. Messing around in the garage, was working on a stool and needed to remove cushion. It was stuck so i climb up on the foot rail and gave her a hard yank and it came out causing me to lose my balance, fell forward and a drawer on my ICON locker stopped my fall right below the eye.image.jpg
Click to expand...
I hope you heal quickly.
 
OP
M

MIke.Gradoz

Well-known member
Joined
Feb 7, 2022
Messages
75
Got this e-mail today, be nice to have a completed order, I'm sure needing the space the other locker will provide.

Good afternoon,

Your Harbor Freight Tools ICON product was recently received at a hub store near you! The Harbor Freight transportation team is now quoting your order with our carrier providers.

Once a carrier is assigned, you will be contacted by the terminal agent to organize a delivery date and time. Please allow about a week’s time to be contacted for scheduling.

If you have any concerns or questions, please reach out to me or the ICON team by email at : [email protected]

Thank you again for your business!

Sincerely,

Emily Carpenter

ICON Transportation Support
 
To avoid these ads, REGISTER NOW!
OP
M

MIke.Gradoz

Well-known member
Joined
Feb 7, 2022
Messages
75
I'll shoot you pic after work or in the morning. Basic setup is primarily for Pneumatic nail guns and crown staplers on the shelves with all associated nails and staples, Hammers in 2 of the drawers. The last drawer I keep speed squares romex cutters, 200 foot tape measures etc.. Once I get the other other one I plan to store my airless paint sprayer and associated paint, caulking guns, sand paper and the like in that one.
 
B

Blackbyrd

Well-known member
Joined
Nov 28, 2020
Messages
1,175
Location
TN
Thanks for sharing @MIke.Gradoz you gave me an idea! One of my big drawers is full air tools I don't use much if at all since I started using battery stuff. I may put them and my hammers innthe locker and free up drawer space.

I'm also eyeing a new welder cart to get some of that stuff outta my box too.

I'm still super happy with the choice. I'll probably get the stainless top someday though.
 
OP
M

MIke.Gradoz

Well-known member
Joined
Feb 7, 2022
Messages
75
Blackbyrd said:
Thanks for sharing @MIke.Gradoz you gave me an idea! One of my big drawers is full air tools I don't use much if at all since I started using battery stuff. I may put them and my hammers innthe locker and free up drawer space.

I'm also eyeing a new welder cart to get some of that stuff outta my box too.

I'm still super happy with the choice. I'll probably get the stainless top someday though.
Click to expand...
Your welcome, I also have several air tools that get no airtime anymore, got them in the kobalt along with other **** I don’t use. I have a Hobart 140 rancher (mig)with a cart, but I keep it out with my detached shop that stores my boat. Still trying to figure out all the welding vice/grips magnets. Do I leave them on the cart or put them in the 73”.leaning toward leaving them on the cart as I have no use for them unless I’m welding.
 
OP
M

MIke.Gradoz

Well-known member
Joined
Feb 7, 2022
Messages
75
Blackbyrd said:
Thanks for sharing @MIke.Gradoz you gave me an idea! One of my big drawers is full air tools I don't use much if at all since I started using battery stuff. I may put them and my hammers innthe locker and free up drawer space.

I'm also eyeing a new welder cart to get some of that stuff outta my box too.

I'm still super happy with the choice. I'll probably get the stainless top someday though.
Click to expand...
Oh, you will like the stainless top. Love mine7413A846-F47C-4979-B612-D127E40DB538.jpeg
 
B

Blackbyrd

Well-known member
Joined
Nov 28, 2020
Messages
1,175
Location
TN
I'll have to snag some pics of my layout.

Yeah I wanted the top initially but waited, at first I really liked the black rubber top, but I think I'm gonna hate cleaningnit I'm used to stainless work surfaces.
 
OP
M

MIke.Gradoz

Well-known member
Joined
Feb 7, 2022
Messages
75
Blackbyrd said:
I'll have to snag some pics of my layout.

Yeah I wanted the top initially but waited, at first I really liked the black rubber top, but I think I'm gonna hate cleaningnit I'm used to stainless work surfaces.
Click to expand...
That would be great! I'm curious how you set it up.
 
B

Blackbyrd

Well-known member
Joined
Nov 28, 2020
Messages
1,175
Location
TN
Not sure now many it will let me attach at once but here goes .
 

Attachments

  • 20220328_115823.jpg
    20220328_115823.jpg
    382.8 KB · Views: 49
  • 20220328_115929.jpg
    20220328_115929.jpg
    417.2 KB · Views: 50
  • 20220328_120008.jpg
    20220328_120008.jpg
    280.9 KB · Views: 49
  • 20220328_120032.jpg
    20220328_120032.jpg
    411.7 KB · Views: 49
  • 20220328_120059.jpg
    20220328_120059.jpg
    467.9 KB · Views: 47
  • 20220328_120119.jpg
    20220328_120119.jpg
    335.2 KB · Views: 44
  • 20220328_120126.jpg
    20220328_120126.jpg
    399.4 KB · Views: 40
  • 20220328_120147.jpg
    20220328_120147.jpg
    409 KB · Views: 44
B

Blackbyrd

Well-known member
Joined
Nov 28, 2020
Messages
1,175
Location
TN
@MIke.Gradoz here is my layout. Have 3 empty draweres currently, but I have a lot of clamps for body panel work that will go in there.

I'm thinking of shuffling hammers and air tools into the locker after seeing how you did yours.
 

Attachments

  • 20220328_120047.jpg
    20220328_120047.jpg
    463.2 KB · Views: 44
  • 20220328_120154.jpg
    20220328_120154.jpg
    310.6 KB · Views: 43
  • 20220328_120204.jpg
    20220328_120204.jpg
    333.1 KB · Views: 42
  • 20220328_120223.jpg
    20220328_120223.jpg
    366.8 KB · Views: 41
  • 20220328_120230.jpg
    20220328_120230.jpg
    414.1 KB · Views: 38
  • 20220328_120236.jpg
    20220328_120236.jpg
    367.6 KB · Views: 36
  • 20220328_120250.jpg
    20220328_120250.jpg
    377.3 KB · Views: 34
  • 20220328_120257.jpg
    20220328_120257.jpg
    373.4 KB · Views: 52
OP
M

MIke.Gradoz

Well-known member
Joined
Feb 7, 2022
Messages
75
Blackbyrd said:
@MIke.Gradoz here is my layout. Have 3 empty draweres currently, but I have a lot of clamps for body panel work that will go in there.

I'm thinking of shuffling hammers and air tools into the locker after seeing how you did yours.
Click to expand...
Looks good! It sure is nice having the extra room. I have about 90% of my tools in the ICON, the other (Kobalt) is 60% full but mostly duplicates and air tools.
 
B

Blackbyrd

Well-known member
Joined
Nov 28, 2020
Messages
1,175
Location
TN
I still have my husky 66inch wide box it just house basic tools and house stuff In it now. I kept the more automotive geared electric stuff in this box but I have cabinets and drawers in the back of the shop with more of my junk .
 
W

wga

Member
Joined
Dec 21, 2016
Messages
14
Location
Yorba Linda, Ca.
Hey, get well soon, hopefully no eye problems. Do the drawers open to full extension? Do the drawers
open with minimal effort? I've had problems with mine since day one. 15 months old.
Do you have a HF ICON phone number or email contact for someone in management?
Thanks.
 
OP
M

MIke.Gradoz

Well-known member
Joined
Feb 7, 2022
Messages
75
0A64A364-E71E-4379-8D19-8B25573F377C.jpegYes drawers open full, initially I had to pull them out hard to extend the rails but now it fine. Yes my drawers open with little effort, after. I Adjusted each drawer, u adjust your yet? I do have both contact info but not at work with me.
 
W

wga

Member
Joined
Dec 21, 2016
Messages
14
Location
Yorba Linda, Ca.
I had to pull them out hard as well, which to me seems odd. The top drawer comes out an angle, one corner is 'stuck'.
The HF branch I use (Orange, Ca.) is hit and miss on service. I have adjusted the drawers, watched the Youtube vid etc.
The drawer on the lower right with the compartment for screw gun storage is a real bear to open.
If you can get me the contact info that would be great. I am on the road for a couple of weeks of vacation and will
be back 1 May.
You have a great storage solution for your shop and it looks great.
Thanks
Warren
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom