Lowe's Clearance Thread 2014

[sdavis622]

18 1/2" tall X 21 1/2" deep X 36" wide. Hope that helps.

Just finished assembling mine. Pretty happy with its quality for $67. I added external tooth lock washers to all screws and nuts simply because I had them on hand. Hopefully it helps keep vibration from loosening them over time.

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[RH2]

Thank you very much guys. That's perfect.

 

[elronin]

A bunch of the Red head stuff has been on sale for a while now. On slickdeals there was a thread last week. had a bunch of idiots buying stuff that they had no idea what is was for.

Dude i couldn't agree with you more. Was trying to get 20 3/8 by 5 inch wedge anchors for 32 cents. Was going to use them for 6 foot 4x4 Steel columns for a porgulla I'm going to build but the order got canceled. Probably ebay oh well got go be quicker next time.

 

[MonoxieChild]

Anyone with the tool cart that doesnt like how you have to lock it to keep the lid closed, i found a ghetto hack to fix that.

All i did was remove one of the lift supports on the inside. So now instead of a pair, there is only one. Now i can close the lid, and it stays down, or if i lift it slightly, the 1 support lift still has plenty of power to open it, and to hold it open.

 

[PassnThru]

Anyone with the tool cart that doesnt like how you have to lock it to keep the lid closed, i found a ghetto hack to fix that.

All i did was remove one of the lift supports on the inside. So now instead of a pair, there is only one. Now i can close the lid, and it stays down, or if i lift it slightly, the 1 support lift still has plenty of power to open it, and to hold it open.

Yes - it is slightly annoying. But I just left one of the keys in it.

 

[erty67]

Jacobs drill chuck. Item #: 253583

$4.80

 

[Automag88]

I went to pick up a couple sets of the wrench rails today and found the 1/2" and 3/8" drive magnetic socket rails on sale for $3.50 and $4.00 respectively. I think they were normally $10 or $11

I forgot to say they are the are the ones that are set up like a little shelf that hold the sockets magnetically not the ones you snap the sockets on

 

[fitz11]

I went to pick up a couple sets of the wrench rails today and found the 1/2" and 3/8" drive magnetic socket rails on sale for $3.50 and $4.00 respectively. I think they were normally $10 or $11

I forgot to say they are the are the ones that are set up like a little shelf that hold the sockets magnetically not the ones you snap the sockets on

Don't buy those socket holders, they are terrible!

 

[Automag88]

Don't buy those socket holders, they are terrible!

Too late! Haha I figured they will be alright on the top shelf of my tool cart to put the sockets I need for a job in

 

[stage20]

Don't buy those socket holders, they are terrible!

i thought about getting some for dividers in my big drawer between my flat phillips and nutdrivers.

almost cheaper than some angle and i dont have to paint it or put a hole in my box if i want to change something up.

 

[Itinerant]

Jacobs drill chuck. Item #: 253583

$4.80

Thanks for the heads-up, got the last one at my local store for $3. Also noticed that the steel chuck #83638 was just marked for clearance and is already down to $14.98.

 

[kenped86]

Got the last chuck here $1.80

Sent from my HTC One using Tapatalk

 

[drwheels]

Chucks are still $12 here. The dewalt 12 inch three pack went back up today. I guess all of the bosch good buys are gone around here.

 

[thewatusi]

Finally got around to stopping in a store that still had some spark plug kits still in stock. Found them buried behind some other items in the automotive section. $12.58 is a steal just for the ratchet alone.

(part # 436178)

 

[Twiggss]

Thanks for the heads-up, got the last one at my local store for $3. Also noticed that the steel chuck #83638 was just marked for clearance and is already down to $14.98.

the 83456 is $5 near me.

 

[Brians VWss]

Local store had the max access wrench set for 4.58
Anyone use these are they any good. For 10.00 you could have 14 wrenches, mm and st. Store also had service cart for 70.00 trying to think of a reason to buy

 

[g2shuck]

Part number on the max access wrenches?

 

[Brians VWss]

Looks to be 379797 for the sae

 

[kenped86]

Small cup for paint sprayer. 248536. $1.98 reg $7.98

Sent from my HTC One using Tapatalk

 

[alxdgr8]

Looks to be 379797 for the sae

$4.19 at a local store for me, going to pick them up.

Lists that they work for SAE and metric due to the spline drive, so their doesn't appear to be a metric specific set online.

 

[kenped86]

1/4" Female NPT couplers. $0.36 item 68604. handy for when those air ratchets go on clearance

Sent from my HTC One using Tapatalk

 

[bigboost]

$4.19 at a local store for me, going to pick them up.

Lists that they work for SAE and metric due to the spline drive, so their doesn't appear to be a metric specific set online.

Crazy, they are $2.10 at my store haha.

 

[stage20]

2.98 here down to 2.49. no deal. they are not that good of a fitting. for 36 cent id bite.

 

[AlwaysFixingSomething]

Local store had the max access wrench set for 4.58
Anyone use these are they any good. For 10.00 you could have 14 wrenches, mm and st. Store also had service cart for 70.00 trying to think of a reason to buy

Those wrench sets are $4.19 in my area. The odd thing is they have 3 different part numbers but yet they are all the same? Says they work on both metric and SAE there isn't seperate SAE and metric sets.

 

[turmlos]

Those wrench sets are $4.19 in my area. The odd thing is they have 3 different part numbers but yet they are all the same? Says they work on both metric and SAE there isn't seperate SAE and metric sets.

The boxed/splined ends work on both SAE & metric fasteners, the open ends do not. 379797 has SAE open ends, 379798 has metric open ends.

 

[AlwaysFixingSomething]

The boxed/splined ends work on both SAE & metric fasteners, the open ends do not. 379797 has SAE open ends, 379798 has metric open ends.

ahh that's what it is. thanks

 

[wvrailroader]

Are there any new coupon codes for Lowe's? I finally found the Kobalt tool cart for $71.60, but I can't find the $10 off coupon code.

 

[Xtrom]

Mine just went down too!! Scored 2 of them.

 

[wvrailroader]

Got the last one my local Lowe's had. This forum definitely lightens my wallet lol.

Sent from my DROID RAZR HD using Tapatalk

 

[cardude56]

Are there any new coupon codes for Lowe's? I finally found the Kobalt tool cart for $71.60, but I can't find the $10 off coupon code.

http://www.alunei.com/lowes-coupon-generators/#

I bought it 2 days ago online and picked up at local store used the $ 10 off of $ 50

For $ 61 plus tax

 

[SQ is the SQUAD]

anyone have a 10$ 50 code that works? the generator gave me a few bad codes

 

[wvrailroader]

I kept putting the codes in from that site and they were all invalid. I just went ahead and got it for $71.60.

Sent from my DROID RAZR HD using Tapatalk

 

[DLAB]

Bought the 4 PC tune up kit tonight. And the 1/4 drive lighted ratchet just cause it was only $4.

 

[stage20]

The 4pc tune up kit here is showing new low price of 17.97. THe ratchet is 29.97 by itself. I need a long 3/8 ratchet but not sure if I should spend the money on something better quality? I don't want to spend 18 bucks for a ratchet then spend 50 or 60 for the same thing

 

[DLAB]

At my lowes the tune up kit was only like $12. I would have bought another but only saw one. But the quality of the ratchet seems to be pretty good.

 

[Brians VWss]

Picked up the 4.19 wrenches. Nice quality good feel for 0.60 each.

 

[DLAB]

Unfortunately I didn't see any of those wrenches when I was there. I was hoping to find them.

 

[P_856]

The 4pc tune up kit here is showing new low price of 17.97. THe ratchet is 29.97 by itself. I need a long 3/8 ratchet but not sure if I should spend the money on something better quality? I don't want to spend 18 bucks for a ratchet then spend 50 or 60 for the same thing

I've been using it for over a year now it's a nice ratchet, 72 tooth I believe.

 

[bareass172]

I scooped up more of the socket trays today as well as the 29 piece Hitachi drill bit set for $20. Most of the other deals discussed here haven't been at my store also.

 

[nicksnothereman]

Local store had the max access wrench set for 4.58
Anyone use these are they any good. For 10.00 you could have 14 wrenches, mm and st. Store also had service cart for 70.00 trying to think of a reason to buy

I own them but I've never used them. I'm not sure why I bought them I'm kind of a stickler for non "it's metric AND sae!" stuff and don't really see much sae so... Probably use them when I have to replace the exhaust flange gasket on my car; almost always end up with sae hardware because I'm too cheap to buy the good hardware which is probably why I have to replace that gasket every year and a half.

In your case...it's 5 bucks for a set of wrenches. You ain't going to find anything cheaper including the harbor freight stuff. They look well built to me, most of the taiwanese kobalt stuff is excellent.