rockwithjason
Well-known member
Thank you for your answer. Now I understand the difference
i imagine that there are a few russian sayings and puns that would leave me confused as well
Not very big garage of Russia
- Thread starter SBogaCH
- Start date
i imagine that there are a few russian sayings and puns that would leave me confused as well
rockwithjason
Well-known member
you have quite a creative streak in you sergey. you should do well selling those lamps if you choose to, and the video was cool
Thank you. Now I'm unemployed, because I left my job to make such things. I didn't have time to combine these two activities.
rockwithjason
Well-known member
best of luck to you in your business!
rixtrix1
Well-known member
Good luck with your new endeavor, Sergey!
Thank you, Ric!
Hi everybody!
Today I want to tell you a story about my new endeavor.
I fell to made lamps in November and distributed them through all my friends and social network. One my "friend" has got some connections which might be useful for me. I offer him collaboration, I made products, he advertised them. He doesn't accept. Of course I forgot this talk. At the end of December I learnt he had advertised another table of engine which was not mine. I distracted, but my wife stood me up. I decided - war means war. And began to work. In social network my works have more likes. This is my first win. At the end of January I got order for my table and shelf which would stand in the first barbershop. This is Russian barbershop network. Yesterday when I brought them there they cut my hair and beard for free, I'm happy)))
So i can f**k off my "friend" - I WIN!!
От спасибо! Thank you!
That's the spirit ,see what good it did when he did that to you? Made you more determined, good for you
Yes, it was good experience. Thanks!!
POTOP
New member
Было такое не раз!Однажды терпел 3 дня в итоге вытащили в больнице 4 стружки из глаза теперь без очков никуда!
theoldwizard1
Well-known member
In the US I think we just call it a "chip".
Get a face shield/goggles ! You only have 2 eyes !!
sean Buick 76
Well-known member
I always enjoy your projects, especially the auto related tables and lamps etc!
Было такое не раз!Однажды терпел 3 дня в итоге вытащили в больнице 4 стружки из глаза теперь без очков никуда!
в очках я был. стружка рекошетом попала в глаз. пока матерился и моргал,она наделала 3 глубоких царапины. врач сказал глаз не открывать капать капли через каждые 2 часа
I was in the glasses on my eyes, but chip got into my eye by rebounding. While I was cursing like a trooper and winking, they made 3 deep scratches inside. The doctor said not to open the eye and to use drops in it every 2 hours.
somebody didn't like your table?
Yes!
Thank you!
My new project, V 8 engine table. My cat is on this photo, he likes to be in garage.
Hi
One month ago I forgot the soldering iron on table, it's was on. The next day I saw a big hole on the table. Today I have blocked up the hole at last by filling up a polyester resin. But because thickness was big, the polyester resin is cracked.
One month ago I forgot the soldering iron on table, it's was on. The next day I saw a big hole on the table. Today I have blocked up the hole at last by filling up a polyester resin. But because thickness was big, the polyester resin is cracked.
Ditto... Looking forward to seeing your progress with the V8 table!
How's the eye?
Sent from my iPad using Tapatalk
rockwithjason
Well-known member
keep us up to date on the table and your eye. garage journal is cheering for you.
rixtrix1
Well-known member
Hope things are going well for you. Let us know how you're feeling.
Thank you. I try) I'm thinking to post new photo with the V8 table. But it is not the end.
How's the eye?
It is ok
I have wanted to post a significant theme about the last month for the whole week. It was full of many interesting events in my life. But there is no time for post(((
A small teaser for you=) On Saturday my wife and I were driving back home from Samara city and on Monday I was requested an interesting job of TIG welding.
A small teaser for you=) On Saturday my wife and I were driving back home from Samara city and on Monday I was requested an interesting job of TIG welding.
rixtrix1
Well-known member
Interesting!
Hello
It has happened, I have made this post)) Let's begin...
When I accepted an interesting job of TIG welding, I wanted to post to GJ everyday, as if I had on-line translation across the ocean. But I walked my legs off.
So. It was a dank weather of early spring. I had a call from my constant client of TIG welding. In an hour I prepared my equipment. As I knew well what I expected to have there, I took a gas mask, flexible tube and a fan besides my case and welder.
My road to work.
Tadaam, my work was to stiffen a fuel tanker. There were some mistakes which were made during projecting. The inner partitions were broken.
The first day of marking, cleaning and making it habitable=)
The conditions were funny: the temperature inside was +40, i could breathe only with the help of the gas mask or with ram-air (that is why i got the fan).
I have the gas-mask and head phones on me here. Here I was cleaning the places of welding.
It is very hard to see here, but i put on my gas mask with ram air through the flexible tube and also the welding mask.
My task was to weld a plate (width of 5 mm and size of 300*180 mm)to a bottom of fuel tank and partition, then to connect them with a rib. As the partition was oval and the plates were flat, i used press.
So I needed 6 days of 10 working hours. Totally 48 plates and 24 ribs were welded.
The story about March work is not finished.
It has happened, I have made this post)) Let's begin...
When I accepted an interesting job of TIG welding, I wanted to post to GJ everyday, as if I had on-line translation across the ocean. But I walked my legs off.
So. It was a dank weather of early spring. I had a call from my constant client of TIG welding. In an hour I prepared my equipment. As I knew well what I expected to have there, I took a gas mask, flexible tube and a fan besides my case and welder.
My road to work.
Tadaam, my work was to stiffen a fuel tanker. There were some mistakes which were made during projecting. The inner partitions were broken.
The first day of marking, cleaning and making it habitable=)
The conditions were funny: the temperature inside was +40, i could breathe only with the help of the gas mask or with ram-air (that is why i got the fan).
I have the gas-mask and head phones on me here. Here I was cleaning the places of welding.
It is very hard to see here, but i put on my gas mask with ram air through the flexible tube and also the welding mask.
My task was to weld a plate (width of 5 mm and size of 300*180 mm)to a bottom of fuel tank and partition, then to connect them with a rib. As the partition was oval and the plates were flat, i used press.
So I needed 6 days of 10 working hours. Totally 48 plates and 24 ribs were welded.
The story about March work is not finished.
You look like an cosmonaut (space guy) our astronaut That job probably pays very well, but it would be scary for me. I don't like closed in places, claustrophobic. I think you need a fresh air mask, that is made for that kind of work. Just be careful, hate to see you have an accident.
You think this will be a full time work? OK keep sending pictures, its interesting to see that type of welding inside a gas tank
That job probably pays very well, but it would be scary for me. I don't like closed in places, claustrophobic. I think you need a fresh air mask, that is made for that kind of work. Just be careful, hate to see you have an accident.You think this will be a full time work? OK keep sending pictures, its interesting to see that type of welding inside a gas tank
You look like an cosmonaut (space guy) our astronaut
You think this will be a full time work? OK keep sending pictures, its interesting to see that type of welding inside a gas tank
I don't have a full time work. When they have a problem, then I go to work. If they don't have problem I sit at home))
The fresh air mask, that is made for that kind of work, costs very much. For example: my sistem costs 10 000RUB (166$), the fresh air mask costs 120 000RUB (2000$), that job is payed of 60 000RUB (1000$).
My new table is almost made. I found an engine of Nissan V6. I arranged about this engine with an owner, I disassembled the engine and took the engine block for free.
Before
After
After it was painted
69Fastback
Well-known member
Hi Sergey I just finished reading through all 16 pages. Well done you are doing some awesome work. I was a bit concerned about your safety welding inside that gas tank through????
Ещё б)))))
rixtrix1
Well-known member
It's ok, we are f*cking crazy Russians
Ha Ha!
Reminds me of a guy on YouTube that always says he is a "Professional Russian" which allows him to do all the funny stuff he posts there.
Nice work on the tanks. Did you also re-weld all the cracks where the partitions separated. Seems to be a large crack in the center of an original weld below one of your reinforcements.
Does someone do a pretty complete job of cleaning and evacuating out the tanks before you get there?
Last edited:
1/2 Cup
Member Emeritus
WOW what an awesome welding job in a confined space like that, well done.
Regards
Regards
sunsation288
Well-known member
Great idea in this thread !!, thanks for sharing