I have a two-row of that in 3/8 drive for storing my bit sockets, it's absolutely perfect for that but I still prefer the Hansen-style for my regular sockets. It's nice to have options.
Last edited:
Princess Auto deals
- Thread starter rmsg0040
- Start date
I have a two-row of that in 3/8 drive for storing my bit sockets, it's absolutely perfect for that but I still prefer the Hansen-style for my regular sockets. It's nice to have options.
I'm not sure if this is all stores, but my local one (Calgary North) is offering an additional 50% off any items with a price ending in 5 ($x.x5), which is the majority of their clearance items.
I picked up the Pneumatic grease gun for $15, reg. $70 and a set of metric stud removers/installers for $9. The grease gun is an outgoing model and feels better built than the current model.
Also of note is that the Extra-Long Dual Flex Ratchet has been pulled off shelves and put in to "Neutral" status - not technically discontinued, but likely to be in the near future. Most stores have none in stock, so online is probably your only option if you were after one. I was waiting for it to go on sale, but it never seemed to.
I picked up the Pneumatic grease gun for $15, reg. $70 and a set of metric stud removers/installers for $9. The grease gun is an outgoing model and feels better built than the current model.
Also of note is that the Extra-Long Dual Flex Ratchet has been pulled off shelves and put in to "Neutral" status - not technically discontinued, but likely to be in the near future. Most stores have none in stock, so online is probably your only option if you were after one. I was waiting for it to go on sale, but it never seemed to.
Last edited:
knobby
Well-known member
Heavy duty roller seat
Listed as "web only" but call your local store they will price match (save shipping cost)
http://www.princessauto.com/en/detail/heavy-duty-roller-seat/A-p8431496e
Listed as "web only" but call your local store they will price match (save shipping cost)
http://www.princessauto.com/en/detail/heavy-duty-roller-seat/A-p8431496e
Called my store and they won't price match.
knobby
Well-known member
Damn tell them that the windsor store will
When I called the only prerequisite was that they had to have it in stock,they wouldn't issue a rain check at that price
knobby
Well-known member
Picked up the seat last night,made by whiteside in Ohio here is the amazon listing with the makers label http://www.amazon.com/dp/B000P6WMO6/?tag=atomicindus08-20
So i just got off the phone with the head office. I've been watching for their propoint transjack to go on sale for like 6 months now. Reg price is 499, web deals only is 400 + 116 for shipping. I asked if they would match in store, they said no way. He did tell me they have a huge order of the transjacks coming in and there will be a sale on them in late may.
BUILTTOLAST
Well-known member
Chrome 4 way tri-ball mount.
Sale/special price of $34.99.
This is actually my second one,i got the first exact one just before Christmas for the same sale/special price of $34.99,but the pin hole/bore was poorly cut/bored so I just warranteed it for this brand new one.
Sale/special price of $34.99.
This is actually my second one,i got the first exact one just before Christmas for the same sale/special price of $34.99,but the pin hole/bore was poorly cut/bored so I just warranteed it for this brand new one.
Last edited:
knobby
Well-known member
knobby
Well-known member
brain injury acting up again? See post #167
BUILTTOLAST
Well-known member
1/4" mini die grinder,special buy,for $10,no name brand.
My local store had about 100 of them.
I usually only like to buy Mastercraft/Mastercraft Maximum brand,but for $10,I grabbed it.
My local store had about 100 of them.
I usually only like to buy Mastercraft/Mastercraft Maximum brand,but for $10,I grabbed it.
Last edited:
Guys, i bought this today. WOW! She has a lot of snap! Very quiet too! IMO it's going to be a life saver for where you can't fit a gun.
here is who makes it....
http://www.kuani.com/ugC_ShowroomItem_Detail.asp?hidShowID=28
here is who makes it....
http://www.kuani.com/ugC_ShowroomItem_Detail.asp?hidShowID=28
Last edited:
gaffobohs
Well-known member
It'd probably work well for crank pulley bolts and stuff like that. If its a special but what's the regular price?Guys, i bought this today. WOW! She has a lot of snap! Very quiet too! IMO it's going to be a life saver for where you can't fit a gun.
here is who makes it....
http://www.kuani.com/ugC_ShowroomItem_Detail.asp?hidShowID=28
Not sure, but i bought it for subaru crank bolts. This way i don't have to remove the rad to change timing belt. Should save over an hour of time.
Caliper bolts will be easy as pie too.
rancherbill
Well-known member
Dunno, but reading the mfr. website, they private label stuff for a major US brand. I guess the implication is that this 'special purchase' is a one time deal of a pro grade product.
I made another thread on it where a member who works for IR denies kuani builds it for them.
I'm not sure i buy it tho.
Either way, this product rocks!
gaffobohs
Well-known member
I made another thread on it where a member who works for IR denies kuani builds it for them.
I'm not sure i buy it tho.
Either way, this product rocks!
I was looking at it online and there's a question asking if It's the same as the IR. They answered saying it comes from the same people that make their propoint air tools.
Sent from my iPad using Tapatalk
rancherbill
Well-known member
Yeah I'm not so sure the dude at PA customer service would know.
The store would see vendor codes. The vendor code might be an agent for several firms or it could be the actual manufacturer.
I am impressed with ProPoint so they are definitely sourcing from good vendors.
I'll agree with that. The PP lineup is pretty solid.
PharaohXJ
Well-known member
So far i had good luck with the proPoints and the Titan as well as any thing that says made in Taiwan cant say the same for the Chinese made products
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
PharaohXJ
Well-known member
Also summit tools has a clearout sale on the Master palm air tools got a micro airratchet 24$ http://www.masterairtool.com/product_detail.asp?id=40&sku=61020
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Outlander
Well-known member
My SIL lives 10 minutes from PA in Ottawa. I remarked yesterday to my wife how I was disappointed the Easter dinner there was cancelled as I had a list of PA stuff to be addressed. To my surprise Mrs Outlander laughed and said she understood.I'm going to retract my previous statement. I went through PA's and Kuani's tool lineup last night, and I will agree that propoint does source some air tools from Kuani.
lol! Nice! make sure to post pics!
MikeF2316
Well-known member
cleaner $6
24" 1/2 ratchet $30
brake caliper kit $45
http://www.princessauto.com/en/deta...yertown&utm_source=eflyer&utm_campaign=hosted
http://www.princessauto.com/en/detail/general-purpose-pressure-washer-detergent/A-p8203093e
http://www.princessauto.com/en/deta...yertown&utm_source=eflyer&utm_campaign=hosted
24" 1/2 ratchet $30
brake caliper kit $45
http://www.princessauto.com/en/deta...yertown&utm_source=eflyer&utm_campaign=hosted
http://www.princessauto.com/en/detail/general-purpose-pressure-washer-detergent/A-p8203093e
http://www.princessauto.com/en/deta...yertown&utm_source=eflyer&utm_campaign=hosted
Last edited:
short4stuff
Well-known member
- Joined
- Dec 7, 2014
- Messages
- 108
I have that ratchet, had it for a couple years, works well in a professional environment
MikeF2316
Well-known member
Been waiting for these 1/4 swivels for over a year. Finally back on sale and in stock.
I got those swivels the first time around. You'll like them.
alwaysFlOoReD
Well-known member
rmsg0040; brake caliper kit $45 [url said:
So who else saw faces in the caliper kit photo?
To bad they had zero in stock. Had to take a rain check.
Out of stock in my area too. Said the truck was delayed and would be here tomorrow.
Does anyone know if the standard sockets that are 1/2 price come with lifetime warranty? I'm thinking of returning the 400 piece CT set that I got for $175 and getting these instead. Ya, the CT set comes with a bunch of other stuff, but I either already have most of it or will likely never use it. The PA sockets works out to about $120.
The propoint are lifetime. powerfist is not.
What location were you at? I got the truck line as well.