To avoid these ads, REGISTER NOW!

Residential water pipe?

DeeDubz

Well-known member
Joined
Nov 20, 2019
Messages
1,438
Location
Socal
Im just curious what would be a good water pipe to use for residential? I want to replace my old pipe. I was thinking of just running PVC schedule 40. I live in so cal the depth required is a foot. Anyone have recommendations?
 
To avoid these ads, REGISTER NOW!

MongoTA

Well-known member
Joined
Mar 10, 2018
Messages
1,004
Location
CT
I'm guessing since it'll be buried it's an exterior water supply pipe?

I'd recommend HDPE. Black pipe. Comes in rolls of varying lengths. That allows you to have a single run with no unions/joints from the street to the house. Not brittle like PVC and has better fatigue resistance as well.

Consider running a warning tape above the pipe as well in case of future digging.
 

Sumboodie

Well-known member
Joined
Mar 20, 2021
Messages
10,697
Location
AK
The line to my house is 1.25" type K copper.

Had to dig it out after the first winter, the contractor had part of it buried only about 2ft and of course it froze. Supposed to be 10.
 

That Guy Scott

Well-known member
Joined
Dec 31, 2010
Messages
139
Location
SoCal
Im just curious what would be a good water pipe to use for residential? I want to replace my old pipe. I was thinking of just running PVC schedule 40. I live in so cal the depth required is a foot. Anyone have recommendations?
You can use PVC if you want, I did, but I had a unique situation. I’d use black poly/HDPE/PEX. You can check out Ewing https://ewingirrigation.com/products/irrigation/pipe/hdpe-pipe or PUS in Corona https://www.performanceutilitysupplyinc.com/ I’m pretty sure They’ll have what you need. Also, I would go deeper than 1’, use a flagging material in the trench and you’re supposed to also install a tracer wire.
 

Renegade1LI

Well-known member
Joined
Mar 11, 2018
Messages
4,962
Location
long island ny
This is what you should be using, specd by most localities, also uses copper tube size fittings, always make sure it has NSF approval.
 
OP
D

DeeDubz

Well-known member
Joined
Nov 20, 2019
Messages
1,438
Location
Socal
Sorry I should have been more specific, it will be the domestic water supply
 
To avoid these ads, REGISTER NOW!

Wheelingit

Well-known member
Joined
Jul 28, 2020
Messages
330
Location
Maryland USA
Schedule 40 PVC is prone to cracking. Don't use it. Copper or pex is good. I always like to use copper since if it is hit with a shovel or something it won't split open.
 

reader2580

Well-known member
Joined
Dec 31, 2014
Messages
14,544
Location
Minneapolis, MN
The water feed from my well to my house is the black poly pipe. I’m pretty sure it was installed in 1980 as it goes under the concrete basement floor.
 
OP
D

DeeDubz

Well-known member
Joined
Nov 20, 2019
Messages
1,438
Location
Socal
I think im going to use black poly pipe. I tried of using PVC. I have a water leak under my concrete that was just poured less than a yr ago. Its the water line to my shop/pool equipment. The water line has been moved 3 times. By me, the pool ppl and the ppl that built my shop. I suppose one of us is to blame for the leak. I suppose its at a fitting. Luckily my wife an I were planning on re piping the water line to the house. When I replace the water line Im going to run a new section to the pool / shop water line and tie in. All in all I think ill have to trench about 150ft. I have a friend thats a plumper. He ll help me tie at the meter and into the house.
 

firebirdparts

Well-known member
Joined
Jun 8, 2016
Messages
10,626
Location
Kingsport, TN
It's pretty indestructible in my limited experience. Grew up on a well, and so we had that like reader2580. I'm on city water now, copper.
 

kbs2244

Well-known member
Joined
Nov 11, 2006
Messages
14,065
there may be a code or water supply co requirment
it would be a good idea to check
 

Crazyjake8493

Well-known member
Joined
Sep 26, 2014
Messages
3,961
Location
Upstate NY
Skip the PVC, I'd use black poly or PEX. Indoors I use all PEX, and black poly for outdoor runs above or below ground. PEX would also be fine underground but not exposed unless it is a UV-resistant PEX.
 
OP
D

DeeDubz

Well-known member
Joined
Nov 20, 2019
Messages
1,438
Location
Socal
Yesterday I filled out a call before you dig ticket online. I was surprised to see the water district show up around 4pm. Unfortunately they dont mark anything after the meter.... But they gave me a lot of info. They suggested using 1 inch black ploy. 12 inches is plenty of depth. They mentioned theres a sewer line going toward my house and to stay away from that. But they advised me it should be deeper than 12inches.
 

Bretny

Well-known member
Joined
Jul 31, 2017
Messages
3,918
Location
Dutchess county NY
Yesterday I filled out a call before you dig ticket online. I was surprised to see the water district show up around 4pm. Unfortunately they dont mark anything after the meter.... But they gave me a lot of info. They suggested using 1 inch black ploy. 12 inches is plenty of depth. They mentioned theres a sewer line going toward my house and to stay away from that. But they advised me it should be deeper than 12inches.
Yes call before you dig generaly dosnt mark past where the municipality owns. So they really dont care if you screw up your own utilities..just theres.
 
To avoid these ads, REGISTER NOW!
Top Bottom