woodturner9
Well-known member
Check the local ad for your store, too, mine has the same deal online.
Sears.com hot deals and clearance thread
- Thread starter Spn1025
- Start date
Check the local ad for your store, too, mine has the same deal online.
Pumpman1968
Well-known member
http://www.ebay.com/itm/NEW-CRAFTSM...:g:1a0AAOSwgQ9VnwAJ&item=181912239671&vxp=mtr
$86.00 plus $10 shipping. This was before the Sears Hometown store sale.....people are just dumping them now.
Last edited:
lhortt
Well-known member
Whew...Now I can stop looking ...Thanks!
If you're looking for U.S.A. made nut drivers, this is the cheapest I've seen them go for.
$17.99
Hopefully this link works...
http://www.shopyourway.com/craftsman-12-pc-nutdriver-set-in-zippered-case/289180
$17.99
Hopefully this link works...
http://www.shopyourway.com/craftsman-12-pc-nutdriver-set-in-zippered-case/289180
Sorry to burst your bubble....
But these are Made in China now. There is a chance of getting leftover USA, but all these sets produced in the last month or so, and going forward are 100% made in China. Both the case and the nutdrivers. So YMMV for USA on this.
Currently, the only way to guarantee 100% USA nutdrivers is to buy the 7-piece Metric nutdriver set and the 7-piece SAE nutdriver set. That will give you a 14-piece USA nutdriver set (includes 2 extra pieces, smallest Metric and smallest SAE size). But I would imagine both of those 7-piece sets will go China once stock runs out and they produce future runs.
So if you want USA nutdrivers, better jump on something now.
EDIT: PS - Your best bet at finding the 12 piece zippered case still Made in USA is to buy it from your local Kmart store. Because the stock on these moves slower at Kmart.
Also, the price is cheaper from Kmart, only $15 right now for the same set. Go over to your local Kmart, pick through them, and grab a USA set.
http://www.kmart.com/craftsman-12-pc-nutdriver-set-in-zippered-case/p-010W065282428001P?prdNo=1&blockNo=1&blockType=G1&sid=KAx20050801x13xSlickdeals&aff=Y&PID=4485850&AID=10660381
Last edited:
lhortt
Well-known member
If you can find them, Kmart has the 12 piece w/case on clearance for $15.00....USA made. I bought 3 sets yesterday for presents and the store I was at had 3 left.
I was going to post this in a HD thread, but figured most would be wondering "WTF is Shop Your Way???". Plus, any earned points would have to be spent at Sears or Kmart.
Get 30% back in points for Home Depot and other sellers today by clicking on the store link:
http://www.syweverywhere.com/everyday2awesome
Fine print is at the bottom of the page, and your interpretation of the rules is as good as mine when it comes to SYWR.
I clicked HD link when it was $25 back in points, and it took about a week for the $25 to appear in my SYWR balance.
Get 30% back in points for Home Depot and other sellers today by clicking on the store link:
http://www.syweverywhere.com/everyday2awesome
Fine print is at the bottom of the page, and your interpretation of the rules is as good as mine when it comes to SYWR.
I clicked HD link when it was $25 back in points, and it took about a week for the $25 to appear in my SYWR balance.
Did you miss the big clearance on USA Craftsman tools earlier this year? The discounts I got at Kmart stores easily beat the lowest sale prices Sears has had for the exact same items. As others have mentioned, the nutdriver set (down to $15) is another USA clearanced tool, but it might incorrectly show out of stock on the Kmart site for a store.
Hmmm...I'm going to have to go back and ask them to look in the storage room for those white boxes. Though, now the registers will probably pull up the full prices shown Sears.com.
turmlos
Well-known member
Nope, all of the Craftsman Professional "white box" items have the same sticker on them with the same item number, so they ring up at 2.49 regardless of size.
EDIT: The ad states that this price will be valid through 2 December, not sure what will happen after then.
Last edited:
kiatech
Well-known member
kiatech
Well-known member
$131 before tax
turmlos
Well-known member
Looks like my haul, although I have quite a few of the longer ones. I keep thinking I should try another store.I think I have a problem
I think I have a problem
What percentage of them have the vapor blasted tips? My store gave me 5 percent off the non vapor blasted ones I bought because I told them they were flawed. I was hoping for a little more than 5 percent off...
jelk151
Well-known member
kiatech
Well-known member
I didn't even bother
dkroth
Well-known member
tjpavlov
Well-known member
Are you guys buying the Craftsman Professional Screwdrivers in regular stores, outlet stores, or hometown stores?
I saw them at an outlet store. They were marked as a BF doorbuster.
kiatech
Well-known member
Outlet, no home stores around here.
Hometown store for me...had to drive 30 minutes to it as the mall stores close to me didn't have stock.
morgantm
Well-known member
Which store did you go to?
Fuquay
It was at outlet, hometown and hardware stores in my area not main line sears. I have not gone to a hometown store yet though since that's a good drive away from me. I went to two outlet and two hardware stores and still couldn't complete a set.
What does a complete set contain? Is there a listing to all the item numbers...just wondering how many more there are versus the 32 I picked up.
Travisnd
Well-known member
There are 45 drivers (slotted/phillips/torx) from a list I compiled awhile ago.
should be 37 - 40 different drivers in that box with both 3/8" slotted missing and both the 3/16" slotted and p1 stubby, not sure if anyone found all the torx . Seems 2 stubby torx also where very hard to find. Can't say I ever saw an offset driver they had listed.
Last edited:
PeterT
Well-known member
I picked up a couple of those ice pick thingies,,, good for hand to hand combat
dngrmse
Well-known member
I was able to put together a full torx set of the Craftsman screwdrivers. The T20 was the hard one to find.
kiatech
Well-known member
kiatech
Well-known member
I thought my 50 was a lot... I'm also willing to trade my extra torx for other torx. I'm trying to get a full set of both long and short
doubt it, they drop the price until it moves but, half the time outlet stores can't find the damn things. You think lowes is bad, try to order something from a sears outlet lol.
Vbwiley92
Well-known member
I put up a list of my extra's in the general thread about the deal, two stores had a decent amount of torx but no complete sets The t10, t20 and t25 stubby look like they where pretty hard to come by along the T20 long. Between 4 stores I didn't find one of those but I didn't go until after the bf rush so can't say if they had them or not.
Last edited:
I seriously doubt it...but the link shows what would entail a complete set.
kiatech
Well-known member
I didn't gountil today and I only hit one store. Next store is 40 mins away
turmlos
Well-known member
I managed to find a complete long Torx set at one store, but the short T10 & T20 remain elusive. I also haven't been able to find the P2 x 12", 1/4" x 8", 5/16" x 6" or either 3/8". I didn't even know the P1 & 3/16" stubbies existed until someone here mentioned them.