To avoid these ads, REGISTER NOW!

Sears.com hot deals and clearance thread

To avoid these ads, REGISTER NOW!
T

Tellingthem

Well-known member
Joined
Nov 6, 2013
Messages
818
Location
Traverse City, Michigan
Doohickey said:
I like my Craftsman version well enough, but here's an alternative for a lower price:

KD Tools Digital Tire Gauge $5.99

prod_1625543512
Click to expand...

I got the kd one. Works pretty good for what it is. Basic, no backlight, but seems pretty accurate.
 
X

xriderbc

Well-known member
Joined
Mar 29, 2014
Messages
227
95m3ltw said:
Based on reviews, big gamble
Click to expand...

Yeah, reviews are either really great, or awful. One guy said the case isn't sealed at all around the circuit board against moisture, so he sealed it all up. I think ill do the same. Got $20 back in points too, and free shipping (they'll probably pull that quickly, they usually do). Had a $10 off coupon, and points, so about $25 for me.

Thanks SPN
 
Last edited:
R

radrush

Well-known member
Joined
Oct 30, 2010
Messages
828
Location
Atlanta, GA
95m3ltw said:
Based on reviews, big gamble
Click to expand...

Spn1025 said:
Craftsman Electronic Torque Wrench, 3/8 in. Drive

Regular price $219.99
Your savings - $120.00
$99.99

http://www.sears.com/craftsman-elec...lerId=SEARS&prdNo=26&blockNo=26&blockType=G26
Click to expand...

Craftsman electronic digital torque wrench - formerly made by the Danaher company of Alpharetta, Georgia (U.S.A.)

COO = CHINA

Since I found this other web site with fix-it instructions for the torque wrench, I'm going to take the gamble. Fix-it instructions only good for USA models.

http://siber-sonic.com/hardwaretools/47711tw.html


.
.
.
.
.
 

Attachments

  • digital torque wrench1.jpg
    digital torque wrench1.jpg
    51.6 KB · Views: 37
  • digital torque wrench2.jpg
    digital torque wrench2.jpg
    17.7 KB · Views: 37
Last edited:
X

xriderbc

Well-known member
Joined
Mar 29, 2014
Messages
227
radrush said:
Craftsman electronic digital torque wrench - made by the Danaher company of Alpharetta, Georgia (U.S.A.). Possibly APEX now??? Not sure.

Since I found this other web site with fix-it instructions for the torque wrench, I'm going to take the gamble.

http://siber-sonic.com/hardwaretools/47711tw.html

There is a GearWrench model and MAC TOOLS sells the exact same torque wrench for $552.45
http://www.matcotools.com/catalog/product/ETWC250F/1-2-DRIVE-ELECTRONIC-TORQUE-WRENCH-WITH-ANGLE/

.
.
.
.
.
Click to expand...
Thanks for posting the repair instructions link. I can't find that 34875 wrench as the gear replacement parts on Sears though. Wish there was a pic of it.
 
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
Spn1025 said:
Craftsman 2-1/4 ton Floor Jack Set with 2-1/4 ton Jack Stands

Regular price $89.99
Your savings - $45.00
$44.99
Hot Buy

http://www.sears.com/craftsman-2-1-...lerId=SEARS&prdNo=15&blockNo=15&blockType=G15
Click to expand...
anyone actually have this jack?
reviews are mixed, I could use one for in my trunk, I just found out I don't have a jack with my spare, :)eyecrazy: Way to be prepared right?)
anyways, some said the jack bent even.
But then again, he might have not had it under the car square.
I am not expecting $600.00 quality for $45.00.
think it would be good enough for light infrequent use?
I got one like it at Walmart nor my girlfriends KIA (They don't come with a spare at all :headscrat :( :eyecrazy: ) and the W/M one is decent.
 
F

Farmall450

Well-known member
Joined
Dec 23, 2011
Messages
13,356
Location
Marengo, Illinois
L

lhortt

Well-known member
Joined
Jan 5, 2015
Messages
53
Location
St Louis MO
"anyone actually have this jack?"

I've had one for a couple years, it's ok ....don't expect a heavy duty jack but in my opinion it's acceptable for most DIY stuff.
I read the reviews of the jack bending and the only thing I think would cause that would be misuse or user error :eyecrazy: .
 
C

CNGsaves

Well-known member
Joined
Sep 26, 2012
Messages
13,233
Location
KS and OK
Craftsman Professional SAE 5 piece full polish deep offset 12 pt box end wrench set.
Model 44349
http://www.searsoutlet.com/d/invent...pp=SPU&deals=No&itemSelectionType=&&zip=67212

$36.93 - - Exton, PA
$33.93 - - Middleburg Heights, OH
$33.93 - - Union Gap, WA
$ 5.93 - - Rego Park, NY

^ ^ Any GJer in Rego Park, NY area willing to ship back to me if I pre-pay ??
Send me a PM as my DBE's are pretty sparse. ;)

= = = = = = = = = = = = = = = = = = = = =
Craftsman Professional Metric 5 piece full polish deep offset 12 pt box end wrench set.
Model 44350
http://www.searsoutlet.com/5-pc-Met...d=8285&mode=buyUsedOnly&itemSelectionType=all

$36.93 - - Buffalo, NY
$36.93 - - Exton, PA
$25.93 - - Richmond Heights, OH
$15.93 - - Sacramento, CA

^ ^ Any GJer in Sacramento, CA area willing to ship back to me if I pre-pay ??
Send me a PM as my DBE's are pretty sparse. ;)
 

Attachments

  • Deep offset SAE CM pro 12 pt polished box end wrench set_SearsOutlet.jpg
    Deep offset SAE CM pro 12 pt polished box end wrench set_SearsOutlet.jpg
    40.4 KB · Views: 42
  • Deep offset Metric CM pro 12 pt polished box end wrench set_SearsOutlet.jpg
    Deep offset Metric CM pro 12 pt polished box end wrench set_SearsOutlet.jpg
    61.7 KB · Views: 50
S

swoyer

Well-known member
Joined
Sep 21, 2015
Messages
817
Location
Pennsylvania
Pumpman1968 said:
I bought this creeper when it was 19.99 with free shipping and it is just a step or 2 above laying on a piece of cardboard.
Click to expand...



The harbor freight ones are nice. I think their Pittsburg or whatever, their all plastic with red poly wheels. Not much difference in price.
 
I

icu2tsx

Well-known member
Joined
Dec 29, 2015
Messages
616
Location
Minnesota
bubinga said:
anyone actually have this jack?
reviews are mixed, I could use one for in my trunk, I just found out I don't have a jack with my spare, :)eyecrazy: Way to be prepared right?)
anyways, some said the jack bent even.
But then again, he might have not had it under the car square.
I am not expecting $600.00 quality for $45.00.
think it would be good enough for light infrequent use?
I got one like it at Walmart nor my girlfriends KIA (They don't come with a spare at all :headscrat :( :eyecrazy: ) and the W/M one is decent.
Click to expand...

It works... BUT it takes like 40 pumps before your car is a few inches off the ground, I bought the HF jack ($60) 4 pumps and my car is all the way up.
 
To avoid these ads, REGISTER NOW!
S

scooternut

Well-known member
Joined
Jul 31, 2013
Messages
684
Location
Pittsburgh, PA
Finally made it out to my Sears outlet or clearance center or whatever they call it.

They had C3 1/2 impacts for $69 with a battery. That is a great deal. Mine removes my 150 ft/lb lug nuts without issue, though I do have the "more powerful" battery.

There were still some of them socket sets left, even the 1/4 impacts. I think down to $10.99.

They had 100 or so of the craftsman professional drivers by WF. I dont get the craze, its the first that I've handled them and the tips looked like really garbage chrome tools. Had a T27 in my hand for the Harley but even put it back. Were these chromed all the way through the tip? They looked bad.

They had the Dewalt reversible metric sets, but they were still $40. Nice set, but I need an 8mm
 
S

Super Sport

Well-known member
Joined
Jun 30, 2011
Messages
4,081
Location
West Michigan
Craftsman C3 19.2-Volt High Capacity Lithium-Ion Battery Pack - $59 Reg $89.99
http://www.sears.com/craftsman-c3-1...lerId=SEARS&prdNo=15&blockNo=15&blockType=G15

Craftsman 10 pc. Impact Grade Bolt-Out™ Damaged Bolt/Nut Remover - $38.99 Reg $64.99 Should be made in USA.
http://www.sears.com/craftsman-10-p...lerId=SEARS&prdNo=34&blockNo=34&blockType=G34

Craftsman 2-1/4 ton Jack Stands, 2 pk. - $14.99 Reg $29.99
http://www.sears.com/craftsman-2-1-...lerId=SEARS&prdNo=18&blockNo=18&blockType=G18

Craftsman 8 in. Locking Flex Pry Bar - $16.99 Reg $24.99
http://www.sears.com/craftsman-8-in...lerId=SEARS&prdNo=33&blockNo=33&blockType=G33

Craftsman Garage Door Opener 3-Function Visor Remote Control - $19.99 Reg $44.99
http://www.sears.com/craftsman-gara...lerId=SEARS&prdNo=43&blockNo=43&blockType=G43

Craftsman 2 pc. Handi-Cut Set - $19.99 Reg $30.99
http://www.sears.com/craftsman-2-pc...sellerId=SEARS&prdNo=1&blockNo=1&blockType=G1
 
F

firebird1999us

Well-known member
Joined
Apr 24, 2009
Messages
174
CNGsaves said:
NO GO . . . . . . Sears says . . . "We're Sorry. This coupon is no longer valid."
Click to expand...

That literally all happened between 11-12. Prior to that all my coupons were working. I had to call for them to add coupons. But the $10 off one worked like an hour ago!?!
 
E

EdJack

Well-known member
Joined
Apr 23, 2013
Messages
1,522
bubinga said:
OK, Thank You, :bounce:
The heck with that, the one at walmart works better than that.
May as well get the walmart one, and get the $14.99 jack stands on sale right now.
Click to expand...

I'd recommend spending 12 bucks more and getting the professional version of the jack stands on sale right now.
 
B

Brownsfan

Well-known member
Joined
Apr 16, 2012
Messages
5,974
Location
Cleveland Ohio
Check your local Hometown and Appliance and hardware stores. Mine just got BOXES of pro screwdrivers in all sizes and tip variations.
 
C

casestudies

Well-known member
Joined
Jan 23, 2015
Messages
68
bubinga said:
anyone actually have this jack?
reviews are mixed, I could use one for in my trunk, I just found out I don't have a jack with my spare, :)eyecrazy: Way to be prepared right?)
anyways, some said the jack bent even.
But then again, he might have not had it under the car square.
I am not expecting $600.00 quality for $45.00.
think it would be good enough for light infrequent use?
I got one like it at Walmart nor my girlfriends KIA (They don't come with a spare at all :headscrat :( :eyecrazy: ) and the W/M one is decent.
Click to expand...

Got one a couple years ago, used it ~6 times, and the shaft that goes through the two front wheels started to bend down in the middle. Sometimes a pin on the jack would catch on the frame coming down too. After a few uses, it felt unreliable.

Short of it is, it got me by for the job I needed it for, but I wound up buying a professional model jack that'll last my lifetime for my next repair. Would probably look elsewhere for anything that's serious.
 
W

winlinmac

Well-known member
Joined
Aug 17, 2015
Messages
3,742
Location
USA
This bow saw was on sale for $5 the other day. I'm still trying to figure out (without going into the store) if this is Made in the USA. Any idea?

prod_1796167012


and

This lopper was on sale yesterday for $13. Price "may" still be valid in the store.

spin_prod_227764801
 
K

kneeman

Well-known member
Joined
Mar 12, 2014
Messages
1,704
That big plastic handle looks like China ****. All there new garden stuff has that

Sent from my SAMSUNG-SM-G935A using Tapatalk
 
W

winlinmac

Well-known member
Joined
Aug 17, 2015
Messages
3,742
Location
USA
Came to know that the lopper is Made in Taiwan. From the price point, I wouldn't mind using them beyond their intended use. Then again, the blade on the bow saw may not be so good; would have cut open oil filters. :lol:

kneeman said:
That big plastic handle looks like China ****. All there new garden stuff has that

Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
 
C

cadavjo

Well-known member
Joined
Apr 22, 2014
Messages
338
chowderhead said:
Is the floor jack for this any good?
Click to expand...

I've had that set for roughly 8 years, and it no doubt has changed. The jack looks a bit different, but maybe not.

I think when I got my set it was $80 on sale, and I consider it decent. For $120, I might look at harbor freight...

The jack stands work as expected, the creeper is garbage.
 
R

rexer

Well-known member
Joined
Sep 4, 2012
Messages
195
Location
Earth
Today's Sunday paper, Galdiator 30" cabinets back on sale $99.99..

April 3th to the 9th...
'
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom