To avoid these ads, REGISTER NOW!

Show us your cool, "old" drill press

To avoid these ads, REGISTER NOW!
4

406Rich

Well-known member
Joined
Nov 4, 2014
Messages
289
Location
Elk Grove, Calif
Ran across this Buffalo drill press with a lifting head, never seen one before...not mine its on market place.
 

Attachments

  • 69917742_201706197487010_5511388925710565376_n.jpg
    69917742_201706197487010_5511388925710565376_n.jpg
    112.5 KB · Views: 123
W

WhoWhatNow

Well-known member
Joined
Feb 22, 2011
Messages
1,889
Location
Collegeville, PA
406Rich said:
Ran across this Buffalo drill press with a lifting head, never seen one before...not mine its on market place.
Click to expand...

I had one of those. Heavy as hell but it was a bit of a PIA to fasten anything to the table. You would need to drill and tap holes in the base and mount a drilled and taped sub base to secure anything. That is fine for production which is what it was meant for but not great for one offs in a hobby shop. Drilled wonderfully, however.
 
O

Odd Job

Well-known member
Joined
Apr 13, 2019
Messages
1,383
Location
British Colombia
Canadian Buffalo floor model. Hoover motor I believe to be the original just needed to clean the on/off switch.
 

Attachments

  • 20190807_214642-691x921.jpg
    20190807_214642-691x921.jpg
    141.5 KB · Views: 81
Last edited:
Z

zkling

Well-known member
Joined
Jan 23, 2007
Messages
16,939
WhoWhatNow said:
I had one of those. Heavy as hell but it was a bit of a PIA to fasten anything to the table. You would need to drill and tap holes in the base and mount a drilled and taped sub base to secure anything. That is fine for production which is what it was meant for but not great for one offs in a hobby shop. Drilled wonderfully, however.
Click to expand...

Agreed, production table units aren't for most, especially home owners. Can be down right dangerous to the unknowing.
 
O

Outlawmws

Well-known member
Joined
Aug 9, 2011
Messages
39,238
Location
The Badlands
406Rich said:
Ran across this Buffalo drill press with a lifting head, never seen one before...not mine its on market place.
Click to expand...

My Canedy-Otto has all the makings for a lift head and when I get back to it I'm going to put the gears and crank on it. It already has the lift table. I've already bought the parts.
 
E

EngineerNate

Well-known member
Joined
Oct 19, 2019
Messages
206
Location
Bristol, TN
First post here. First old tool. First drill press. Lots of firsts. :D

1945 Delta Milwaukee 17 with production table and MT2 quill. Hoping it has the slow speed gear set.
 

Attachments

  • received_2491698167718146.jpeg
    received_2491698167718146.jpeg
    38.3 KB · Views: 93
  • received_490011114928294.jpeg
    received_490011114928294.jpeg
    21.4 KB · Views: 72
  • 2019-10-20 18.09.20.jpg
    2019-10-20 18.09.20.jpg
    153.6 KB · Views: 81
4

406Rich

Well-known member
Joined
Nov 4, 2014
Messages
289
Location
Elk Grove, Calif
Outlawmws said:
My Canedy-Otto has all the makings for a lift head and when I get back to it I'm going to put the gears and crank on it. It already has the lift table. I've already bought the parts.
Click to expand...

Did not know you had a Canedy-Otto... so do I.....:beer: Mine sort of has a lifting head...
 

Attachments

  • IMG_1186.JPG
    IMG_1186.JPG
    102.9 KB · Views: 74
  • DSCF0675.jpg
    DSCF0675.jpg
    149.2 KB · Views: 70
Last edited:
O

Outlawmws

Well-known member
Joined
Aug 9, 2011
Messages
39,238
Location
The Badlands
Mine is a more conventional head, not a camel back. a Royal 18 to be specific.

I also have a mini bench mounted camel back Canedy-Otto - a baby compared to yours. no base; a flange bolts to the bench...
 
G

gatewaysysop

Well-known member
Joined
Nov 11, 2008
Messages
3,291
Location
Arizona
Here's mine. Picked this up some years ago. Pretty much 100% original condition, down to the cord, which is surprisingly still in perfect shape. I added the multi-speed attachment and link belts earlier this year, which was definitely worth the expense:

attachment.php


attachment.php


I really like the styling on these, how well built and easy they are to work on.

Currently hunting for a second one, just because. :thumbup:
 

Attachments

  • drill press 1.JPG
    drill press 1.JPG
    56.5 KB · Views: 303
  • drill press 2.JPG
    drill press 2.JPG
    40.3 KB · Views: 299
To avoid these ads, REGISTER NOW!
S

SP3

Well-known member
Joined
Jan 21, 2019
Messages
90
Location
Canton, Oyo
I snagged a Delta DP-220 for $85 this summer. Bought it from the grandson of the original owner. Still has its original light fixture. Near zero no runout. No idea how old it is other than the last patent listed on the tag is from '37. Here's a pic of the serial # tag.
 

Attachments

  • IMG_1892.jpg
    IMG_1892.jpg
    58.5 KB · Views: 75
S

Smokeshow69

Well-known member
Joined
Dec 7, 2012
Messages
8,373
Location
Pacific Northwest
SP3 said:
I snagged a Delta DP-220 for $85 this summer. Bought it from the grandson of the original owner. Still has its original light fixture. Near zero no runout. No idea how old it is other than the last patent listed on the tag is from '37. Here's a pic of the serial # tag.
Click to expand...



Any other pictures? This one is a good one of the tag but shows nothing else? Any overall shots?


Sent from my iPhone using The Garage Journal mobile app
 
B

bubinga

Well-known member
Joined
Jul 26, 2014
Messages
12,744
Location
Bridgeport Ohio. (Across River From Wheeling WV)
SP3 said:
I snagged a Delta DP-220 for $85 this summer. Bought it from the grandson of the original owner. Still has its original light fixture. Near zero no runout. No idea how old it is other than the last patent listed on the tag is from '37. Here's a pic of the serial # tag.
Click to expand...
Post up some better pictures please.
heck, You got a good deal on the OEM light, and a "free drill press" thrown in!!!!!~:bounce::bounce:
 
S

SP3

Well-known member
Joined
Jan 21, 2019
Messages
90
Location
Canton, Oyo
It drills small holes in metals easily (1/2" is max I've tried). I am working on building up an intermediate pulley so I can slow things for larger holes. It will also get a 1/4" thick aluminum plate between it and the drawer set/stand it's on to stiffen things up. Looking for a cross slide, too.
 

Attachments

  • IMG_1903.jpg
    IMG_1903.jpg
    49.3 KB · Views: 93
  • IMG_1902.jpg
    IMG_1902.jpg
    97.3 KB · Views: 92
  • IMG_1901.jpg
    IMG_1901.jpg
    43.7 KB · Views: 93
S

Smokeshow69

Well-known member
Joined
Dec 7, 2012
Messages
8,373
Location
Pacific Northwest
SP3 said:
It drills small holes in metals easily (1/2" is max I've tried). I am working on building up an intermediate pulley so I can slow things for larger holes. It will also get a 1/4" thick aluminum plate between it and the drawer set/stand it's on to stiffen things up. Looking for a cross slide, too.
Click to expand...



If you paid $85 for that, let me be the first to say you ****! That is in amazing shape given its age. Just needs to be lubricated and loved!


Sent from my iPhone using The Garage Journal mobile app
 
4

406Rich

Well-known member
Joined
Nov 4, 2014
Messages
289
Location
Elk Grove, Calif
SP3 said:
It drills small holes in metals easily (1/2" is max I've tried). I am working on building up an intermediate pulley so I can slow things for larger holes. It will also get a 1/4" thick aluminum plate between it and the drawer set/stand it's on to stiffen things up. Looking for a cross slide, too.
Click to expand...
One sweet deal you got....! :beer:
 
4

406Rich

Well-known member
Joined
Nov 4, 2014
Messages
289
Location
Elk Grove, Calif
Whats the consensus on installing the treadmill motors, I acquired a 2.5 HP treadmill motor, thinking about using it with a variable speed control. pros/cons any help appreciated. I've watched half a dozen or so videos on them...:headscrat
 
Last edited:
J

JoCoSawdust

Well-known member
Joined
Nov 19, 2018
Messages
2,416
Location
Eastern NC
SP3 said:
It drills small holes in metals easily (1/2" is max I've tried). I am working on building up an intermediate pulley so I can slow things for larger holes. It will also get a 1/4" thick aluminum plate between it and the drawer set/stand it's on to stiffen things up. Looking for a cross slide, too.
Click to expand...

Sweet press WITH the retirement light! Yes you do indeed ****.
 
T

tool_scrounge

Well-known member
Joined
Jul 20, 2010
Messages
4,193
Location
Southern California
406Rich said:
Whats the consensus on installing the treadmill motors, I acquired a 2.5 HP treadmill motor, thinking about using it with a variable speed control. pros/cons any help appreciated. I've watched half a dozen or so videos on them...:headscrat
Click to expand...

Usually the HP rating is vastly overrated. A lot I have seen run pretty fast for use in metal. Yes, the speed can be electronically lowered but the torque remains constant (i.e. if you half the speed, the HP is also halved). You can add extra reduction pulleys but that makes for more complexity.

When I needed variable speed on drill presses I went with industrial DC motors, usually 1725 rpm. They have a real horsepower rating. I usually picked them up from surplus dealers or found good deals for them on Ebay. I usually go with Baldor or Leeson. Similarly, used or NOS industrial speed controls are pretty cheap on Ebay.
 
4

406Rich

Well-known member
Joined
Nov 4, 2014
Messages
289
Location
Elk Grove, Calif
tool_scrounge said:
Usually the HP rating is vastly overrated. A lot I have seen run pretty fast for use in metal. Yes, the speed can be electronically lowered but the torque remains constant (i.e. if you half the speed, the HP is also halved). You can add extra reduction pulleys but that makes for more complexity.

When I needed variable speed on drill presses I went with industrial DC motors, usually 1725 rpm. They have a real horsepower rating. I usually picked them up from surplus dealers or found good deals for them on Ebay. I usually go with Baldor or Leeson. Similarly, used or NOS industrial speed controls are pretty cheap on Ebay.
Click to expand...

Thanks for the info..
 
D

Davefr

Well-known member
Joined
Jan 7, 2010
Messages
11,833
Location
OR
406Rich said:
Whats the consensus on installing the treadmill motors, I acquired a 2.5 HP treadmill motor, thinking about using it with a variable speed control. pros/cons any help appreciated. I've watched half a dozen or so videos on them...:headscrat
Click to expand...

The challenges are the mounting, the pulley and the electronic controller.

Treadmill motors are usually face mount and most DP's use a base mount. The next challenge will be mounting the pulley. (Shaft size, length, etc.) You might not be able to even mount the original DP pulley onto a treadmill motor. You can usually use a single step pulley but that will preclude the ability to pick and change to the most optimal pulley steps.

The next challenge will be to get the controller components and mount it in an enclosure (usually quite large).

Unless you have a cheap treadmill motor and all the electronics then it might not be worth the hassle.

IMHO a 1+ H.P. 3 phase motor and VFD is a much simpler project. (basically plug and play). The VFD is small and self contained and you can usually find cheap 3 phase motors with the right shaft dimensions and mount.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom