To avoid these ads, REGISTER NOW!

Show us your welding projects

P

pamike

Well-known member
Joined
Aug 4, 2015
Messages
694
Location
Central PA
I had some 3/4" pipe left over from running air lines in the shop, and I needed a cart to keep my wood blocking and jackstands on, so I whipped this thing up quick. The shelves are laser cut blanks with notches for the uprights to fit in. I bought weld on pipe caps to close the pipes off on the top and give a finished look. Expanding stem casters slid right into the pipe uprights. Had more money in it than I wanted, but the laser blanks saved a lot of labor.
 

Attachments

  • 20180506_140215.jpg
    20180506_140215.jpg
    79 KB · Views: 277
  • 20180506_140233.jpg
    20180506_140233.jpg
    119 KB · Views: 222
To avoid these ads, REGISTER NOW!
L

LXCam

ALLIANCE MEMBER
Joined
Apr 23, 2013
Messages
19,091
Location
AZ
You're a Fn machine dude!!! How the hell do you even do that last weld (pic 8). That's crazy cool!! :bowdown::bowdown::bowdown::bowdown::bowdown: :spit:

maxhemphill351 said:
Haha thanks guys! I've been welding pretty much my whole life. I learned when I was 10. Started TIG at 14, got a job tigging at 16 and I've been doing that ever since.

Here's some pics from last weekIMG_20180427_105152_349.jpgIMG_20180430_175230_539.jpgIMG_20180430_175230_538.jpgIMG_20180501_172134_091.jpegIMG_20180502_173826_657.jpgIMG_20180503_114347488.jpgIMG_20180503_055734839.jpgIMG_20180425_172611_291.jpeg

Sent from my XT1635-01 using Tapatalk
Click to expand...
 
4

4EyedTurd

Well-known member
Joined
Oct 3, 2009
Messages
595
Location
Texas
maxhemphill351 said:
Haha thanks guys! I've been welding pretty much my whole life. I learned when I was 10. Started TIG at 14, got a job tigging at 16 and I've been doing that ever since.

Here's some pics from last week

Sent from my XT1635-01 using Tapatalk
Click to expand...

Do you not drink coffee or soda before welding or drink a beer? I’m still blown away at your skill
 
N

ndr1968

Well-known member
Joined
Apr 18, 2012
Messages
207
Location
Oklahoma
pamike said:
I had some 3/4" pipe left over from running air lines in the shop, and I needed a cart to keep my wood blocking and jackstands on, so I whipped this thing up quick. The shelves are laser cut blanks with notches for the uprights to fit in. I bought weld on pipe caps to close the pipes off on the top and give a finished look. Expanding stem casters slid right into the pipe uprights. Had more money in it than I wanted, but the laser blanks saved a lot of labor.
Click to expand...

Kinda neat how you made it able to roll on the wall like that!
 
J

Jlarson

Well-known member
Joined
Mar 27, 2015
Messages
738
Location
AZ
Repair piece for one of our waste water collection customers, one side stainless tank fitting to repair the original grouted in PVC that was broken off inside by a pump truck crew.

Fabricated onsite in our shop trailer. No bead shot as we slammed the coupling on as soon as we could and put the pipe back to get done inside the shutdown window.

View media item 83082
 
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,332
Location
Northern Utah
Farmall450 said:
Picked up a cracked BT palletjack on letgo last night. Had it fixed by lunch this morning.
Click to expand...

We've repaired hundreds over the years of ones that broke in the same place as the one you have. Between BT, Big Joe and Multiton they all seem to have the same week point.

One thing we were doing on them was to bend a piece of 3/16" into a 90-degree and weld from the backside as kind of a fish-plate to the corner, but you have to remove the tension bars to gain access. It really helped the longevity of them.
 
F

Farmall450

Well-known member
Joined
Dec 23, 2011
Messages
13,355
Location
Marengo, Illinois
zmotorsports said:
We've repaired hundreds over the years of ones that broke in the same place as the one you have. Between BT, Big Joe and Multiton they all seem to have the same week point.

One thing we were doing on them was to bend a piece of 3/16" into a 90-degree and weld from the backside as kind of a fish-plate to the corner, but you have to remove the tension bars to gain access. It really helped the longevity of them.
Click to expand...

I was surprised how thin that metal was when I went to weld it. It has an extra piece along the side now; I won't be using it hard since we do have a forklift but if it cracks again I will do what you did.

I worked at Farm & Fleet and not one of their Crown, Hyster, or ancient BTs was cracked; what are people picking up with these? This came from a candy factory apparently.
 
J

jabberwoki

Well-known member
Joined
May 1, 2009
Messages
6,458
Location
puyallup wa usa
A suspension repair I did a while ago, the rust kind of takes away the beauty tho.
 

Attachments

  • Picture-210.jpg
    Picture-210.jpg
    20.2 KB · Views: 293
Last edited:
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,332
Location
Northern Utah
Farmall450 said:
I was surprised how thin that metal was when I went to weld it. It has an extra piece along the side now; I won't be using it hard since we do have a forklift but if it cracks again I will do what you did.

I worked at Farm & Fleet and not one of their Crown, Hyster, or ancient BTs was cracked; what are people picking up with these? This came from a candy factory apparently.
Click to expand...

I wondered the same thing, what the hell are these people lifting. However, we weren't seeing similar issues with our Crown or Hyster units and I'm sure they were lifting the same items. The biggest issue we had with the Crowns were the load wheels and with the Hysters was the hyd pump leaking.
 
F

Farmall450

Well-known member
Joined
Dec 23, 2011
Messages
13,355
Location
Marengo, Illinois
zmotorsports said:
I wondered the same thing, what the hell are these people lifting. However, we weren't seeing similar issues with our Crown or Hyster units and I'm sure they were lifting the same items. The biggest issue we had with the Crowns were the load wheels and with the Hysters was the hyd pump leaking.
Click to expand...

Yeah, ironically Farm & Fleet's had the same issues. Too bad none of them are perfect at everything, although it seems the newer Crowns are the easiest to move. They must have some big guys to be able to push/pull a load heavy enough to bust the jack.
 
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,332
Location
Northern Utah
Farmall450 said:
Yeah, ironically Farm & Fleet's had the same issues. Too bad none of them are perfect at everything, although it seems the newer Crowns are the easiest to move. They must have some big guys to be able to push/pull a load heavy enough to bust the jack.
Click to expand...

When we were having many of our cracked fork issues, I actually did what we call "follow the load" where we followed the product from warehouse to destination and observed all of the behaviors involved, from loading the product at the warehouse completely through unloading and staging the product at the destination. That is when I witnessed what I think was our biggest culprit as far as cracked forks.

A couple of the docks were not level and compounded by having the old lift in/out style of portable dock ramp which sits a bit more proud on the end of the trailer than the hydraulic lip style of dock ramp. I witnessed the driver offloading the product and I was able to view the forces involved when the heavier pallets would get some momentum behind them and then hit that large lip of the portable dock ramp. You could actually see the frame of the pallet jack flex from the impact. We then switched over to the Crown pallet jacks as their frames were a bit beefier built and even since then we have slightly modified the lip of the portable dock ramps at those couple of destinations.

Our expense in repairs has dropped quite extensively since.
 
B

Blain

Well-known member
Joined
Jul 6, 2017
Messages
46
Today I finished the project that inspired me to take a continuing education welding class to learn how to build it. The bench was inspired by the many workbenches built around the 44" HF box.

CJSJzAK.jpg
 
To avoid these ads, REGISTER NOW!
B

BPJOOP93

Well-known member
Joined
Jun 8, 2009
Messages
887
Location
SW. SD. Almost in nowhere
Just finished my new lawn roller
 

Attachments

  • 578BD8D9-447A-4BB7-B91A-CC656E44C50A.jpg
    578BD8D9-447A-4BB7-B91A-CC656E44C50A.jpg
    147.4 KB · Views: 223
  • 086249D9-4A62-4487-B1FD-877EDCE2844A.jpg
    086249D9-4A62-4487-B1FD-877EDCE2844A.jpg
    146 KB · Views: 186
  • 534BE3EA-4936-4B6F-AD1E-5061E39DDABB.jpg
    534BE3EA-4936-4B6F-AD1E-5061E39DDABB.jpg
    146.2 KB · Views: 186
S

Slednut

Well-known member
Joined
Dec 20, 2012
Messages
2,550
Location
Washington state
I’m about to remove the engine/trans, rear end and suspension form my project car. I wanted a body cart but also wanted access under the car. I’ve had a Miller 211 for a year and a half but have only been doing body panel work so no real thicker material welding.

This last week after work I built a couple of these, besides being able to move the body around the shop I can used them to jack the car up and I can also put jack stands under them (between the wheels). I built them out of 1x3” channel I’ve had for some time.

I still need to clean up some of the welds and paint them.
 

Attachments

  • IMG_0477.jpg
    IMG_0477.jpg
    133.8 KB · Views: 195
  • IMG_0476.jpg
    IMG_0476.jpg
    127.8 KB · Views: 196
  • IMG_0474.jpg
    IMG_0474.jpg
    128.8 KB · Views: 206
V

VonMoldy

Well-known member
Joined
Apr 3, 2006
Messages
46
Location
Utah
Not as nice as I would like but it was a fun exercise in flux core welding which I have never done. I always MIG or TIG. It was pushing the limits of my smallest welder. If it bugs me enough I might go back and redo the screw on pivot plate. The important thing is it is very square and will be a great help in welding things. Most people might just spend the $150 on a bessey clamp but I thought I could make one myself and use my brain and it mostly came out ok, I struggle with overthinking things and it took much longer than i wanted but oh well!

attachment.php


Maybe someone can answer me why all the welding clamps I see have a bevelled wedge clamp instead of a 90 like on mine? Is it just for access to tack weld?
 

Attachments

  • P5282299.jpg
    P5282299.jpg
    147.5 KB · Views: 1,268
S

s14kev

Well-known member
Joined
Dec 12, 2008
Messages
245
Memorial weekend project. Needed a new bookcase to match the floor I just laid. 1/2" square steel tube. I liked the raw finish so just clear coated in satin. Please ignore the missing baseboards!

View media item 83481
View media item 83480
 

Attachments

  • DSC02741.jpg
    DSC02741.jpg
    60.1 KB · Views: 67
  • DSC02739.jpg
    DSC02739.jpg
    67.7 KB · Views: 63
F

FallibleFlyer

Well-known member
Joined
Nov 18, 2011
Messages
159
Location
Arizona
s14kev said:
Memorial weekend project. Needed a new bookcase to match the floor I just laid. 1/2" square steel tube. I liked the raw finish so just clear coated in satin. Please ignore the missing baseboards!
Click to expand...

Very nice! Did you design out all the angled pieces, or just do it live?

Sent from my Nexus 5X using Tapatalk
 
L

LXCam

ALLIANCE MEMBER
Joined
Apr 23, 2013
Messages
19,091
Location
AZ
I'd luv to say this was my weekend project but considering I only got a half a day I'm on it.......you could consider it three weekends work ;).

IMG_5108.jpg

IMG_5106.jpg

IMG_5103.jpg
 
S

s14kev

Well-known member
Joined
Dec 12, 2008
Messages
245
FallibleFlyer said:
Very nice! Did you design out all the angled pieces, or just do it live?

Sent from my Nexus 5X using Tapatalk
Click to expand...

The basic frame was measured and tigged together. All of the angled pieces were cut as random angles once the frame was together. Aim was for a random appearance and to stop books falling out the back and sides. I just got a horizontal bandsaw with swiveling frame which makes cutting angled miters quick and easy. Highly recommend it in addition to a portaband/swag table.
 
A

aka Larry

Well-known member
Joined
May 2, 2012
Messages
8,016
Location
Eastern, NC
s14kev said:
The basic frame was measured and tigged together. All of the angled pieces were cut as random angles once the frame was together. Aim was for a random appearance and to stop books falling out the back and sides. I just got a horizontal bandsaw with swiveling frame which makes cutting angled miters quick and easy. Highly recommend it in addition to a portaband/swag table.
Click to expand...

I admire people who can do asymmetric work like this. My OCD would never allow me to have random angles. Looks awesome though man. Nice work!
 
L

LXCam

ALLIANCE MEMBER
Joined
Apr 23, 2013
Messages
19,091
Location
AZ
zmotorsports said:
That is turning out AWESOME Cam.:bowdown:

Great job.
Click to expand...

Thanks Mike, coming from you means a lot my friend. :beer:

Poor Mike had to put up with my ******* questions while contemplating the design. But his answers where priceless with all his experience in both the towing department and his bumper builds. :thumbup:

BPJOOP93 said:
Looks good. Are those tow points or clevis mounts. I mean do you flat tow it?
Click to expand...

Thanks BP

That's exactly it. The owner tows this behind his RV and already had this kit installed on his dead stock jeep. It came to me for a AC and 4" lift install plus the winch he recently bought. The only thing left to do is the spacer blocks behind the bar brackets and clean up my edges a little better plus I'll be making him some tubular fenders. Once those are done it's off to get powder coated.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom