Show your new tool arrivals

flying eyeball · Jan 12, 2016

https://scontent-sea1-1.**.fbcdn.net/hphotos-xfp1/v/t1.0-9/12417864_1106725116018024_7358534430699126841_n.jpg?oh=934175f8eca9d44e96b45cb8997b00c3&oe=574883FE

saulvg99 · Jan 12, 2016

Got these on sale at sears for $19.99. Still made in America.

Sent from my SM-N920T using Tapatalk

rmsg0040 · Jan 12, 2016

Used mac prybar holder

Dollarama trays

Hilti tea time knife, german made, reminds me of swiss army knife or eka swede 38 knife

Hopefully these work out

fireeqpsrv · Jan 12, 2016

Picked this up for 16.00 at Home Depot

Sent from my iPhone using Tapatalk

m_hatcher · Jan 12, 2016

Just picked these up off craigslist for $40. The deadblow is brand new and the ball pein looks to be new except for light surface rust on the metal caps.

mkIValh · Jan 12, 2016

Magnet for my m12 stick led.

JAKE-THE-TOOL-MAN · Jan 12, 2016

mkIValh said:
Magnet for my m12 stick led.

very cool, I may have to look into purchasing this set up. It could be really handy

firworks · Jan 12, 2016

JAKE-THE-TOOL-MAN said:
very cool, I may have to look into purchasing this set up. It could be really handy

You might check out what jerseykat1 posted over in his thread: http://www.garagejournal.com/forum/showthread.php?t=316743

He used a magnetic camera mount to screw into the standard threaded insert on the M12 Stick LED to get some more versatility out of it.

mkIValh · Jan 12, 2016

firworks said:
You might check out what jerseykat1 posted over in his thread: http://www.garagejournal.com/forum/showthread.php?t=316743

He used a magnetic camera mount to screw into the standard threaded insert on the M12 Stick LED to get some more versatility out of it.

Wish I would have read his post before buying the milwaukee magnet.

ezriderga · Jan 12, 2016

Just received my new replacement Milwaukee rotary tool. It was warranted for 5 years and failed after 3 so they sent me a new one. They even paid postage to return the defective one.

firworks · Jan 12, 2016

mkIValh said:
Wish I would have read his post before buying the milwaukee magnet.

I was inspired by it to try something myself. It didn't work out quite as well. I thought "Hey I've got that adaptor to take a 1/4-20 and attach it to my boom mic stand. I wonder if that could hold the stick light." The answer is it really can't. This is a picture of it precariously not toppling over for the moment.

shanny19 · Jan 13, 2016

That looks like a pretty cheapo boom mike stand. A real one has a counterweight on the **** end of the horizontal boom that would work just fine for that application.

peterbilr98 · Jan 13, 2016

got one finally

Jarhead0408 · Jan 13, 2016

Nice!!!! ^^^ My Dad would love that!

firworks · Jan 13, 2016

shanny19 said:
That looks like a pretty cheapo boom mike stand. A real one has a counterweight on the **** end of the horizontal boom that would work just fine for that application.

Yeah it's just a cheap one for holding little condenser mics for recording Guitar. The M12 Stick light weighs like 10x more than my mics though.

wiens80 · Jan 13, 2016

New to me, 1/2" SK breaker bar. A little Scotch Brite and it's looking pretty good.

four.cycle · Jan 13, 2016

Craftsman 1/4" drive socket set "circle H" by four.cycle, on Flickr

mercucho · Jan 13, 2016

TESA Dial Caliper. Made in Switzerland.

bodyguy16 · Jan 13, 2016

Snap on qd1r200 1/4 torque wrench, 60$ , just in time for a new tsb and snowblower rebuild,

1Garageman · Jan 13, 2016

Question, how did you get that for ONLY $60?? That's a steal :bowdown:

!
The wrench sells for $299 online :eyecrazy:

https://store.snapon.com/US-Torque-Instruments-in-lb--Torque-Wrench-Adj-Click-Type-U-S-Fixed-Ratchet-40-200-in-lb-1-4-drive-P640957.aspx

LXCam · Jan 13, 2016

shanny19 said:
That looks like a pretty cheapo boom mike stand. A real one has a counterweight on the **** end of the horizontal boom that would work just fine for that application.

firworks said:
Yeah it's just a cheap one for holding little condenser mics for recording Guitar. The M12 Stick light weighs like 10x more than my mics though.

Fir, shanny gave you the solution, just counter weight it.

toolmutt · Jan 13, 2016

LXCam said:
Fir, shanny gave you the solution, just counter weight it.

Or buy another one! More tools! (sort of) :bounce:

bodyguy16 · Jan 13, 2016

1Garageman said:
Question, how did you get that for ONLY $60?? That's a steal!
The wrench sells for $299 online

https://store.snapon.com/US-Torque-...d-Ratchet-40-200-in-lb-1-4-drive-P640957.aspx

Classifieds ad, he was asking 100 i told him it was a guess and that i would most likely need to have calibrated, told him if he was negotiable we could work something out. I offered 60$ he took it. I tried it out this morning at work with another wrench and it seems accurate, i will test it next week on the snappy truck to be sure.

CoogarXR · Jan 13, 2016

90zcar said:
I have been wanting a nice step ladder for at my place. Sick of balancing on milk crates.
The wife's parents got me a gift card for Home Depot so I finally broke down and bought me a 6 foot fiberglass Werner. Man this thing is nice.

Sent from my iPhone using Tapatalk

I just bought the same ladder, and it's great! Much improved over the old orange Werner that I had. As another poster mentioned, they make attachments for the top. I bought the 79003 bucket and the 79001 paint cup. I think it was only around $20 total for the pair at Lowes.

I love the attachments. I have used the bucket twice already. It holds my drill, impact driver, drill bit case, and still had room to spare. It even has divots across it for pipes or fluorescent tubes, etc. Highly recommended.

GHBrumbaugh · Jan 13, 2016

Fresh off the truck. SK 1/4 deep sets.

Sent from my iPhone using Tapatalk

D7es3l · Jan 13, 2016

Christmas present from mom, just got in yesterday i don't know what the hold up was:
10inch knipex pliers

Replaced a lost 1/2 wrench and picked up the new SO wire crimpers!

thegroundpounder99 · Jan 13, 2016

GHBrumbaugh said:
Fresh off the truck. SK 1/4 deep sets.

Sent from my iPhone using Tapatalk

Wish we had a S&K truck.....those look really nice.

Sent from my iPhone using Tapatalk

toolmutt · Jan 13, 2016

Got these for future work on a '41 Chevy Pickup.

toolmutt · Jan 13, 2016

And threw this in from the same seller. #0 - #3 Robertson drives. (Calling Jeff)

Off-Street Parking · Jan 13, 2016

four.cycle said:
Craftsman 1/4" drive socket set "circle H" by four.cycle, on Flickr

I'm not really a tool collector, but I have to say, that set is pretty sweet. :thumbup:

vartz04 · Jan 13, 2016

Sk wrench set. Looks almost unused minus the idiot markings on them (missed that in the eBay add but for 1/2 the price of new I am cool with it)

Sent from my iPhone using Tapatalk

m_hatcher · Jan 13, 2016

Refurbished Ryobi P320 from Amazon. Already used it to install some baseboards and am quite happy with the results.

ImageUploadedByTapatalk1452730329.768021.jpg

organ · Jan 14, 2016

four.cycle · Jan 14, 2016

Off-Street Parking said:
"I'm not really a tool collector..."

... stick around this place long enough and you will be.

arrived just today:

E.A. Stromberg model 41-G-500 Vacuum & Fuel Pump Tester by four.cycle, on Flickr

mjoekingz28 · Jan 14, 2016

toolmutt, so what do you call those Snap-Ons? Butterfly screwdrivers? Screw extractors?

four.cycle, that really is a nice set! Someone must have taken great care of them......Is it from the 1940s?

Rogue1987 · Jan 14, 2016

mjoekingz28 said:
toolmutt, so what do you call those Snap-Ons? Butterfly screwdrivers? Screw extractors?

four.cycle, that really is a nice set! Someone must have taken great care of them......Is it from the 1940s?

Those are clutch screwdrivers, someone posted a link to the full set for around $40. Not sure if that deal is dead or not, it was a long time ago.

Sent from my SM-G900V using Tapatalk

JDon99 · Jan 14, 2016

Rogue1987 said:
Those are clutch screwdrivers, someone posted a link to the full set for around $40. Not sure if that deal is dead or not, it was a long time ago.

Sent from my SM-G900V using Tapatalk

Deal is dead. I wanted to get a set or two but missed out.

toolmutt · Jan 14, 2016

mjoekingz28 said:
toolmutt, so what do you call those Snap-Ons? Butterfly screwdrivers? Screw extractors?

As Rogue said, they are clutch head (some people refer to them as butterfly) drivers. Common on Chevrolets of the '40s and '50s. There are two types of clutch head, G like these and A which I think are common on some RVs.

JDon99 said:
Deal is dead. I wanted to get a set or two but missed out.

Yes, the vendor in the Hot Deals thread is sold out. I got these from ebay. PM me if you want the seller's name. He's top rated and I would recommend him.

MattVette89 · Jan 14, 2016

m_hatcher said:
Refurbished Ryobi P320 from Amazon. Already used it to install some baseboards and am quite happy with the results.

That looks really handy. Add it to the want list. :lol_hitti

GHBrumbaugh · Jan 14, 2016

thegroundpounder99 said:
Wish we had a S&K truck.....those look really nice.

Sent from my iPhone using Tapatalk

Should have stated, Fresh off the brown truck, we don't have an SK truck locally.

Show your new tool arrivals

Well-known member

Well-known member

Well-known member

ALLIANCE MEMBER

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

ALLIANCE MEMBER

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member