Show your new tool arrivals

[Carl_WI]

I have the PS21-2A and have no complaints.

Here's a unscientific test that I did with the driver:

I may have to look into the PS-21-2a. I also like the music with the video kind of James Bond ish...

Carl_WI

 

[cm_osu]

Been watching these pairs of wrenches for a while waiting on an auction to go cheap enough to bid. Seller starts a new auction for them every few days. I've seen some go for a couple of dollars. Got mine for $10 shipped.



Sent from my SM-G920V using Tapatalk

 

[MattVette89]

I was at HD today picking up something else and found these in the clearance section....I don't even need them but couldn't say no for $2.50.

 

[upgrading]

The 2 Drilling Hammers are both Dasco.

 

[sgs236]

First set of WERA 932 Chiseldrivers from KCTOOL. Added the WIHA 7-1/2" bent needle nose to get free shipping on the order.

 

[stioc]

$20 parts washer with a broken switch:

2T engine hoist and leveler from CL

HF oscillating tool

Last but not least Incra Miter gauge

 

[Tyguy1209]

Had a 300 dollar tool credit for buying my scanner. Picked up the socket set anf tie rod tool. Got a mat coming for my stainless top on my box.





Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[FOCUS.FREAK]

Sent from my iPhone using Tapatalk

 

[Jim Johnstone]

This is my son proudly holding his new tools. He randomly asked me at dinner a few nights ago, if he could have his own tools. So we just came from home depot where he picked out a Lufkin tape, and a 10 ounce wood handled hammer.

He's currently busy "fixing" his tree house with his new tools.

 

[kwon]

My first Milwaukee buy. 3/8 ratchet with battery and charger.


Already made a home for it.




Sent from my iPhone using Tapatalk

 

[QwikKotaTx]

That's awesome. Mine are little but have their toy tools in a real tool box I bought them. Will get them some real ones when they are older.

 

[Jim Johnstone]

That's awesome. Mine are little but have their toy tools in a real tool box I bought them. Will get them some real ones when they are older.

He's only 4, but he's always asking about building things, and asking to come to my work and see me build things there.

I gave him an old beach top box that I used when I started my apprenticeship, so he's got his tools stashed in it.

 

[MattVette89]

This is my son proudly holding his new tools. He randomly asked me at dinner a few nights ago, if he could have his own tools. So we just came from home depot where he picked out a Lufkin tape, and a 10 ounce wood handled hammer.

He's currently busy "fixing" his tree house with his new tools.

That's awesome. I love it when my kids "help" me in the garage.

 

[T_Roze]

That's awesome. I love it when my kids "help" me in the garage.

Nothing makes me happier than having my girls come out to the garage! My oldest, 4, says she doesn't want to be a mechanic because she doesn't like getting her hands dirty. She'll come around once we restore something for her to drive when she's 16!

Grabbed the Mac tools special on oil filter removal tools. Seams like a decent set. Sorry, no pictures.

 

[JRC3]

This is my son proudly holding his new tools. He randomly asked me at dinner a few nights ago, if he could have his own tools. So we just came from home depot where he picked out a Lufkin tape, and a 10 ounce wood handled hammer.

He's currently busy "fixing" his tree house with his new tools.

Next, maybe he can finish that drywall corner and baseboard.


LOLOL Brehahaha.

 

[joeyd01]

Forgot to get a picture but I got a complete set of Mac anti vibe ball peins lightly used for 150. I think it's 8oz all the way up to a 48oz. Total of 7 hammers

Sent from my VK810 4G using Tapatalk

 

[davethorik]

Just picked these up yesterday at Menards, Midwest 657N Knifti-Cut utility shears/snips. Made in USA. $9.99

I bought the same set ~3 yrs ago at Sears Hardware when it was still around for $13.99, but I love them and only $10 I decided I needed a 2nd set, lol

 

[F124C]

Soldered a new set of jumper cables out of 20' of 2000 volt 2/0 AWG loco wire. My 20 year old set of copper were worn out. These are much lighter and should hold up a for a little bit.



Sent from my iPhone using Tapatalk

Next time you might tape them together so that the terminal clips are staggered, that way they can't short together when you connect one end of the cable set to a battery.

Al.

 

[zyx5432]

I guess you'd consider this a tool...



Being delivered in a week!

 

[ADSR]

I guess you'd consider this a tool...



Being delivered in a week!

wow! Congrats! That's a big 3 point hoe!

 

[L.Cheapo]

Is there any benefit from the 'twisted' type hex keys?
(I don't recall seeing this version before.)

Al.

Saves you the trouble of doing it yourself.

 

[HCNDM]

For casual use as backup. Main set currently a facom 440 and and f80




Sent from my iPhone using Tapatalk

 

[Snap_cap]

For casual use as backup. Main set currently a facom 440 and and f80




Sent from my iPhone using Tapatalk

Who makes those taping knives?

 

[HCNDM]

Who makes those taping knives?

Dunno they are brandless but produced for the Dutch market





They took some abuse and held up chipping out drywall and caulking this morning.

 

[1foxracing]

Is there any benefit from the 'twisted' type hex keys?
(I don't recall seeing this version before.)

Al.

No benefit from the twisting that I can think of, I bought them purely because they don't have a ball end on the long side.

 

[atikovi]

Craftsman 36 inch pry bar made in the USA on sale for $19. Lost, misplaced or can't find my 24 incher so just dumb luck I noticed it strolling through Sears. It's a big *** piece of steel and it now makes me want to go even bigger. I see Mayhew makes a 58 incher.

 

[Moose-LandTran]

I'll have to get some pics some time, i've bought quite a few new things lately. Bought this yesterday, just in case Snap-on stop making them in these colours. I already have a red/chrome 1/2" one:

 

[atikovi]

Came in the brown truck today...GM Tech 2. And soon after, I figured out that to do what I need to do, I need a GM MDI.

What are you working on that you think needs an MDI? I'm rebuilding a couple of Chevy Cruzes and thought the same thing until I tried my Autel on one and it got all the codes for the BCM, ABS, airbag, etc.

 

[anndel]

I guess you'd consider this a tool...



Being delivered in a week!

Congrats! Nice hop toe

 

[anndel]

What are you working on that you think needs an MDI? I'm rebuilding a couple of Chevy Cruzes and thought the same thing until I tried my Autel on one and it got all the codes for the BCM, ABS, airbag, etc.

What Autel do you have?

 

[panknuckshovel]

I guess you'd consider this a tool...



Being delivered in a week!

Who makes it?

 

[Strouty]

I'll have to get some pics some time, i've bought quite a few new things lately. Bought this yesterday, just in case Snap-on stop making them in these colours. I already have a red/chrome 1/2" one:

I bought the 3/8" and the 1/2" in that color, they are purdy.

 

[panknuckshovel]

I bought the 3/8" and the 1/2" in that color, they are purdy.

They are beyond purdy!!!!

 

[joeyd01]

Craftsman 36 inch pry bar made in the USA on sale for $19. Lost, misplaced or can't find my 24 incher so just dumb luck I noticed it strolling through Sears. It's a big *** piece of steel and it now makes me want to go even bigger. I see Mayhew makes a 58 incher.

I have a 58 incher made by Mac. Best pry bar I've bought. Use it everyday.

Sent from my VK810 4G using Tapatalk

 

[Fedwrench]

What are you working on that you think needs an MDI? I'm rebuilding a couple of Chevy Cruzes and thought the same thing until I tried my Autel on one and it got all the codes for the BCM, ABS, airbag, etc.

Autel is hit or miss with their reversed engineered software. A general rule of thumb is that if the GM product has a pop out key when you push a button on your FOB, you need an MDI.

 

[Moose-LandTran]

I bought the 3/8" and the 1/2" in that color, they are purdy.

No surprise you chose the same colour!

 

[nickc12]

Pittsburg 1/2" long handle ratchet.
100pc bit set from HF
Trim tools from HF
and a steal from a pawn shop! SnapOn FAR72C for 40$! Today was a very nice day!


Sent from my iPhone using Tapatalk

 

[jobo1004]

Finally got a Honda lawn mower.

 

[Motorman55]

P.U. a couple of inexpensive tools today at the local Odd Lot store.

1) Flexible lighted/magnetic p/u tool. $4.99

2) 4x Magnifying Glass with Light. $3.99

Both tools work great and the lights are pretty good too.

 

[Strouty]

No surprise you chose the same colour!

Sorry, but I had mine long before you!

If they had them in Pink, would you sell the green?