Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
WildwoodChuck
Well-known member
jfcasey
Well-known member
Nice score, those would be awesome for valve adjustments on newer dpf equipped engines!From today's tool truck visit:
Sent from my SM-T710 using Tapatalk
bodyguy16
Well-known member
Before, you might have only wanted a bigger compressor, now you need one. Makes talking with your financial adviser easier. Good planning!
[emoji482]
Sent from my iPhone using Tapatalk
Yellow hard handle set, fresh off the truck!
Sent from my 707 using telex
Have you seen this set in black?
Attachments
Duster346
Well-known member
You can NEVER go wrong with hard handles.
Duster346
Well-known member
Yes, I do. I cannot guarantee it'll be cheaper than SO, however.
https://asttool.com/detail_page.php...=0&stype=general&category=Oil Change Products
WWheeler
Well-known member
Heavy Metal Doctor
Well-known member
Thanks!
Though I hadn't really thought of any specific jobs, just couldn't pass up the price for a barely-ever-used set!
vintage nut
Well-known member
I'd love to hear how the nutbusters work.Filling out the pliers drawer ...
6.5", 9.5" & 12.5" Griplocks, and 9.5" & 13.5" Nutbuster Channellocks
I've always used Klein and channellock, but I've been (at least mostly) converted to knipex lately... Those cobras are great. That said the nutbusters look even better for that job
Sent from my MotoG3 using Tapatalk
Take a look at the Knipex Raptors
MattVette89
Well-known member
My Mac dealer found an old set of Blackhawk flexhead ratcheting wrenches in his garage. Picked these up for $130. I haven't had a chance to use them, but they seem nice.
cliftonbros89
Well-known member
Yellow hard handle set, fresh off the truck!
Sent from my 707 using telex
You have a part number on that set? I'd like yellow?
Attachments
K-Dog
Well-known member
Spent a little real world time with this scope today.
I put a floor and read body panel in a CR-V. I used the scope to make sure all my rails and supports had plenty of cavity wax and corrosion protection and all my welds were covered.
The range of view on this is not much more than an inch or two. Meaning you really can see very far past the end of the scope. You really have to be on top of what you are looking at. That said, the image it real good and you can enlarge the image ( digitally obviously ).
Clearly there are better scopes, but I doubt there is better at THIS price point.
I bought this set off Cornwell. It was around $20 cheaper than SO.
Here it is.
http://www.cornwelltools.com/webcat/products/ARFUN14KIT-%2d-Funnel-Set.html#
chrisnazzy
Well-known member
Picked up the 3 piece Trusty Cook mechanics deadblow pack during the april fools promotion. Also got a few SK 1/4 inch drive sockets off fleabay, along with a few ratchets.
CameraZOOM-20170407020900789 by
[url=https://flic.kr/p/Sm1kRs]
CameraZOOM-20170330094746516 by https://www.flickr.com/photos/110082568@N08/
CameraZOOM-20170407020900789 by [url=https://flic.kr/p/Sm1kRs]
CameraZOOM-20170330094746516 by https://www.flickr.com/photos/110082568@N08/
Last edited:
WWheeler
Well-known member
Yep. Just put the both of the funnel sets I bought last week to use. They both work perfect on our Ford Ranger & Chevy Cruz. I should have bought them a long time ago. The form-a-funnel also completely saved a mess I've made every year changing the mower's oil which would dump right on the frame.
Just arrived:
Small Form-A-Funnel
Lisle Oil Funnel Set
BlueDriver Bluetooth OBDII Scan Tool for Android
EPAuto Coolant Funnel Set
GearWrench Ratcheting Serpentine Belt Set
disston
Well-known member
Yeah but it's just the sort of Snap On tool I love to buy just to get the name Snap On on it so I can, what, walk around with a **** eating grin? OK, you got me. i don't have an extra $70 bucks for grins lately. Thanks for the info. It is something I need.
Finky198
Well-known member
Some more flare nut tools with a few more on the way
Last edited:
Those look interesting. My 3/8" ratchet wasn't in yet today, so I grabbed a 1/4" long handle flex and a bit holder. I'm staring at this guy now and it's longer than all my 3/8" ratchets, I don't know about this lol...but I hear people like these longer reach style ratchets. Sure feels nice. We shall see.
Attachments
mjoekingz28
Well-known member
I really need something like that. I am very good at being clean until it comes to coolant. It just runs everywhere and gets into my yard. I feel terrible for polluting and destroying the ground around my residence. I went to their website and I guess a sawed off milk (or washer fluid) jug might be ok.
Can you get anything like that local? Or didyou order all that stuff of the web?
Edit: i just saw it is for FILLING....who needs help with that. I need assistance and something for DRAINING.
Last edited:
Buckgnarly
Well-known member
You want this beast....I use it for coolant and auto trans pas...
https://www.amazon.com/dp/B0002SR7SS/?tag=atomicindus08-20
bert1913
Well-known member
http://www.homedepot.com/p/Medium-Mixing-Tub-887101A/202086173
these tubs are 27.5" x 20". for $5.75 each, you can't beat it
Project_shadow
Well-known member
- Joined
- Jun 14, 2014
- Messages
- 677
Been wanting to find out how handy this might be to have around. Scored this one for $20 shipped off Ebay in my favorite SO color!
Sent from my SM-G930P using Tapatalk
SO truck gave them away free for Christmas, they are quite bright, mines green
Sent from my iPhone using Tapatalk
WildwoodChuck
Well-known member
Fedwrench
ALLIANCE MEMBER
PROTO J5250HTC long 3/8 drive 90 tooth ratchet. Measures 12 5/8 long overall, really nice chrome, feel & balance. US Made.
On a side note, PROTO knows how to ship a ratchet. I got this from MSC during a sale. MSC doesn't stock the 90 tooth ratchet so, it was drop shipped from PROTO. It came in a decent sized box, surrounded by sliced cardboard. the ratchet was inside a sealed plastic bag. inside the bag, the ratchet was inside a yellow sleeve of plastic netting, with an orange plastic cap covering the square drive. I guess they didn't want anyone complaining about it being scratched out of the box.
On a side note, PROTO knows how to ship a ratchet. I got this from MSC during a sale. MSC doesn't stock the 90 tooth ratchet so, it was drop shipped from PROTO. It came in a decent sized box, surrounded by sliced cardboard. the ratchet was inside a sealed plastic bag. inside the bag, the ratchet was inside a yellow sleeve of plastic netting, with an orange plastic cap covering the square drive. I guess they didn't want anyone complaining about it being scratched out of the box.
Attachments
FOCUS.FREAK
Well-known member
disston
Well-known member
No luck finding an oil funnel that fits my Ford 4.6 engine. Three styles of filler necks that say fit Ford. Not one of them say which Fords they fit.
WhiffySpark
Well-known member
- Joined
- Oct 22, 2009
- Messages
- 6,252
My lisle does
JuliusPepperwood
Well-known member
24" snap on 1/2 drive dual 80 ratchet
http://www.garagejournal.com/forum/album.php?albumid=5617&pictureid=69664
Used it today to take off a front tow bar and the rear factory trailer receiver on my 86 samurai. Rusted bolts the entire way but it was a champ.
http://www.garagejournal.com/forum/album.php?albumid=5617&pictureid=69664
Used it today to take off a front tow bar and the rear factory trailer receiver on my 86 samurai. Rusted bolts the entire way but it was a champ.
Last edited:
