To avoid these ads, REGISTER NOW!

Small Jack Stands

redmed

Well-known member
Joined
Oct 27, 2014
Messages
276
Location
Michigan
With smaller compact cars my jack stands are many times too tall to fit. Does anyone know of compact jack stands?
 
To avoid these ads, REGISTER NOW!

mrvm

Well-known member
Joined
Feb 12, 2014
Messages
3,848
Location
PA
Check out the jack stands sold at HF. They got some that may be compact enough for you.

image_24316.jpg
 

Need more space

Well-known member
Joined
Jun 23, 2014
Messages
253
Location
Michigan
When it comes to these cheap ones look at them good before using, I had a set of the harbor freight orange and white ones and they treated me well, So well I bought a second set for at home. The very first time I used them the lever that locks the height position folded completely down, since the lever is the only thing that holds the weight the car slammed down to its lowest position.
 

LB-1911

ALLIANCE MEMBER
Joined
Sep 24, 2011
Messages
5,743
Location
Northwestern Il.
Last edited:
OP
R

redmed

Well-known member
Joined
Oct 27, 2014
Messages
276
Location
Michigan

454cid

Well-known member
Joined
Oct 5, 2014
Messages
72
Location
West Michigan
Yeah this sounds like an odd problem to me. Usually when I see jackstands, I'm amazed at how short they are. I drive a 1-ton truck, However.
 
To avoid these ads, REGISTER NOW!

Joe B.

Well-known member
Joined
Jan 2, 2007
Messages
2,752
My current stands go down to 10 inches. When I looked a few years ago these where the shortest I could find.

I did a very complete review of jack stands a few years ago. I don't remember any going lower than that.
 

LB-1911

ALLIANCE MEMBER
Joined
Sep 24, 2011
Messages
5,743
Location
Northwestern Il.
With smaller compact cars my jack stands are many times too tall to fit. Does anyone know of compact jack stands?

My current stands go down to 10 inches. When I looked a few years ago these where the shortest I could find.

You may want to consider using low profile ramps* in conjunction with your floor jack and current stands, you could use 2 x 10's & 2 x 12's if your cautious.

* Race Ramps
http://www.raceramps.com/jack-assist-ramps.aspx
 

zkling

Well-known member
Joined
Jan 23, 2007
Messages
16,939
What you probably need is a jack with taller lift capacity or change your jacking points.
 
OP
R

redmed

Well-known member
Joined
Oct 27, 2014
Messages
276
Location
Michigan
I have been using a bottle jack as a jackstand and a couple 4x4's & a 2x4 when I work on my car with low clearance. Just thought someone made mini jack stands.
 

PBCampbell

Well-known member
Joined
Feb 2, 2009
Messages
871
Location
WV
:headscrat
Have you tried jacking the car up before putting the Jack Stands under?
 
Last edited:
To avoid these ads, REGISTER NOW!
Top Bottom