Why did you use to hold the two speakers up? I see its some kind of thin bar?I needed some music to make the day go a little faster.
Bought some cheap MP3 USB speakers and an Energizer twin USB 120 volt plug.
I also bought a cheap hanging hook designed to screw into drywall. The box already had two threaded mounting holes in the lid.
I ran a charging cord up from the usb adapter , so i can charge my phone while i stream pandora radio.I used aircraft wax string to tie all the wires together. Ill have to use someone elses phone to take a pic of my Galaxy Nexus mounted in place.
Snap on krcs46 mod thread .
- Thread starter Trbobuick
- Start date
So that black bar that is going from one speaker to the other is actually double sided tape? I thought it was some sort of metal rod
I dig it! I'm gonna see if I can find some speakers laying around at home and try setting them up like this
TDWendt
Well-known member
I also agree about both of these statements. The mat doesn't fit the top very well. I got mine close but it's still off a slight bit.
I
TDWendt
Well-known member
nE
Bed liner lid? The lid isn't bedlinered, there is an optional rubber mat from snap-on. I believe the stainless top is on the krsc416( same cart Preety much but with a sliding top)
I love my krsc46
Bed liner lid? The lid isn't bedlinered, there is an optional rubber mat from snap-on. I believe the stainless top is on the krsc416( same cart Preety much but with a sliding top)
I love my krsc46
http://buy1.snapon.com/catalog/item...D=745959&group_ID=745976&store=uk&dir=catalog
•Choose from two durable flip lid materials: stainless steel or truck bed liner
•Choose from two durable flip lid materials: stainless steel or truck bed liner
TDWendt
Well-known member
Oh ok. That's a bigger box. The krsc246 is bigger than the krsc46.
Dieselbutterfly
Well-known member
i have the 246 cart,and yes it is rhino lining on the top lid
hdhogman
Well-known member
I have an older KRSC46,looked at the 246 and thought about trading. After checking specs decided it would be a wash. I think square inch layout was very close. I'm not sure the extra $ for the 246 is worth it. I hope all shoppers are doing their homework. 
OK......
That's either an enormous box or a tiny helo!
Sweet cart, man. I'll be stealing ideas if I end up buying a '46 or '416....
SSGSPEEDMAN
New member
- Joined
- May 6, 2013
- Messages
- 1
When you bought the side box and mounting plate, did it come with screw to mount the box to the adapter plate? what screws or bolts did you use?
Thanks,
Kevin
Thanks,
Kevin
TDWendt
Well-known member
t
After seeing the 246 today(newb at work has one) I really like the depth(those drawers are awesome) but I like the drawer height in my cart. Still very happy with my krsc46.
I have an older KRSC46,looked at the 246 and thought about trading. After checking specs decided it would be a wash. I think square inch layout was very close. I'm not sure the extra $ for the 246 is worth it. I hope all shoppers are doing their homework.
After seeing the 246 today(newb at work has one) I really like the depth(those drawers are awesome) but I like the drawer height in my cart. Still very happy with my krsc46.
bcleen
Member
Can't wait to get mine..Getting a white one with black trim..Also switching out 2 of the 4" inch drawers for 4 2" inch drawers and going with the bigger epiq wheels and all swivel..Should see it next week..
bcleen
Member
Yes the ones on the Epiq series service cart will bolt on the krsc46 and there 8" x 2" swivel.. There in the snap on catalog..
You could say that I've modded mine a wee bit.
I'm also an A&P. I didn't like how the flip top wouldn't let you always use it as a workbench. I then realized how destroyed toolboxes can get if you really use them as a workbench, and improvised. I didn't end up with the cleanest setup in the world but it does its job extremely well and I am more than pleased. 3/16" top, 1x1x.125 square tube bolted in 16 places with 3/16 backing plate to protect the sheetmetal from the weight. I've had two mechanics standing on this table before without a problem.
It only hurts drilling the first two or three holes, after that you get used to it.
I'm also an A&P. I didn't like how the flip top wouldn't let you always use it as a workbench. I then realized how destroyed toolboxes can get if you really use them as a workbench, and improvised. I didn't end up with the cleanest setup in the world but it does its job extremely well and I am more than pleased. 3/16" top, 1x1x.125 square tube bolted in 16 places with 3/16 backing plate to protect the sheetmetal from the weight. I've had two mechanics standing on this table before without a problem.
It only hurts drilling the first two or three holes, after that you get used to it.
Dohcness
Active member
Even on in stock colors , you have to wait on snap on to make them. It took a month for my Royal blue drawers. Patience grasshopper.
So you mean maybe I can custom order them?
NJHandyGuy
Well-known member
saweet i love tool ****
Dohcness
Active member
He gave you the correct part number for extreme green! You can tell your snap on guy to order them but there is no telling how long it will take BHH.
Dohcness
Active member
I ordered my 2" drawers and adapter panel today. We will see how long it takes but, I'm in no rush!
Dohcness
Active member
8-30439AR These are the casters he's referring to. Not the same as Epiq series.
Dohcness
Active member
No! I hate the way that thing fits! It does it's job though so other than the fitment, I can't complain.
bcleen
Member
Ok I'm New to this..How the hell u post pics? I got my custom ordered white Krsc46g and want to post pics
Dohcness
Active member
Go setup an account with photobucket. Once you upload pictures, copy and paste the IMG code to a quick reply.
Or just go to http://tinypic.com
alpinewhite
Well-known member
Dohcness
Active member
So, my SO guy called me early in the morning saying he has my adapter panel and needs to get it off the truck because, it takes up too much space. At lunch, he drops it off. Around the end of the day, I get ready to install it. Lo and behold it had dents on the corners, I assume from shipping! I'm not angry just displeased considering the price.
It will be hidden for the most part so, I just bent them back into shape.
It will be hidden for the most part so, I just bent them back into shape.
Last edited: