To avoid these ads, REGISTER NOW!

Above 1200 Sq/FT The Salvage Garage

Wokspaces above 1200 squarefeet.
To avoid these ads, REGISTER NOW!

casmurbax

Well-known member
Joined
Sep 25, 2012
Messages
2,758
Location
Wilton, NY
Well I tried, I gave up so now I am an enabler.

I want The Hill to become like a clown car, see how much we can get in there!

:beer:
 

harley jim

Well-known member
Joined
Dec 6, 2013
Messages
11,415
Location
Cleveland Tn..........out in the sticks
We are only trying to have a laugh here and not at Stroutys expense we all have our addictions, I always said if I hadn't got married and had three kids I could have a shop full of 32 to 36 fords all finished. If I total up what I have spent on other people that aren't immediate family I could buy an F350 fully loaded with an enclosed trailer to go find the next one. Strouty isn't married he can play harder than some.
I hope my jabbering doesn't offend anyone. If you cant laugh at yourself a little you cant pick on others a little.
Strouty do you have the truck ready I got one singled out. You and pines hurry up I got the shine chillin.bb9b24251f080aaa4693b3ed80718c3c.jpg

Sent from my SM-A102U using Tapatalk
 

Attachments

  • bb9b24251f080aaa4693b3ed80718c3c.jpg
    bb9b24251f080aaa4693b3ed80718c3c.jpg
    380.2 KB · Views: 1
OP
S

Strouty

Well-known member
Joined
Mar 21, 2010
Messages
38,217
Location
Southern Maine
Nope, and I haven’t contacted him either. I did find a better truck, at least in my mind. Will have to leave you all in suspense though. ;)
 
To avoid these ads, REGISTER NOW!
OP
S

Strouty

Well-known member
Joined
Mar 21, 2010
Messages
38,217
Location
Southern Maine
This afternoon sucked, actually it still ***** right now. Perk decided to not start after having the knuckle boom out, had to figure out the problem, seemed to be the ignition switch, but things were still weird, got it going, but the boom away, left it running just to be safe. Cleared the shop so I could back it in, go get in the truck, put trans into reverse, as soon as heat engages, truck stalls, not when letting the clutch out, just when gear engages into reverse position. Forward gears work, reverse no go. After messing with it for a while, decided to try and turn around by positioning truck so it would roll backwards, finally got it turned around, drive it in. Now I have a wiring issue to figure out. :( Get home about 10PM, start to have dinner, then remember that Clark is still outside at the SG :( :(

Pack dinner up and drive to SG, put Clark away, grab some tools, now I am going to eat my dinner and then go home again. Snow is supposed to start around 4 AM, love winter. :(
 
OP
S

Strouty

Well-known member
Joined
Mar 21, 2010
Messages
38,217
Location
Southern Maine
Yup, always, for some reason it is usually something bad. Just got home, again, this time I should be good to go to bed. Will have to figure out the wiring issue soon, but for right now I have a storm, then meeting with the accountant, then trip to look at busses, so probably be next week before I actually get to do anything.
 

1Garageman

Well-known member
Joined
May 12, 2009
Messages
4,417
Location
Columbus, Ohio
I think you just need to clone yourself!

_8iZznb7BAGCcgv3raqJaSAWpbKdxh_AxLh4y_ux-Ja8svwGMjkj_TPq5tUh5MVJy1vesnjsl4JsGSEghe8yBdTTRqmuBR-eAACCR1tDdkzG1hzj650tCzr1VCy14_Z1Nh2zYFsHBynfqVeNIZAOlOee4MBW9CcDwJk
 
OP
S

Strouty

Well-known member
Joined
Mar 21, 2010
Messages
38,217
Location
Southern Maine
Didn’t do too much today, will have a bunch to clean up tomorrow. The ground isn’t frozen and I didn’t want to plow since we are supposed to get freezing rain, rather have it as crust on the snow.
 
OP
S

Strouty

Well-known member
Joined
Mar 21, 2010
Messages
38,217
Location
Southern Maine
I am pretty sure no matter what I do it will be icy and muddy. Next week is supposed to be forties during the days and below freezing at night. They posted a bunch of the roads last week and the ground hog says it is supposed to be an early spring, sure hope he is right.
 
To avoid these ads, REGISTER NOW!
Top Bottom