Things that happen in my garage

[Craptain]

Thanks Cuda, please forgive the Neanderthals posting on my thread. What can I say? I'm anxiously waiting for it and will add it to the wall upon arrival and post pictures. Thanks again for adding another 1000 views to my thread.

I am pretty sure it's a poster. Now why would I think that?
And as for Neanderthals? Well I should be insulted but I've been called worse. LOL

Sent from my LG-D801 using Tapatalk

 

[CudaChick1968]

Maybe you're thanking me too soon. I think the guys had better ideas than I did lol ...

 

[dlcwent]

So I am finally updating the wall. Thank you Cuda. And Bob thank you, I told you I had to find a frame before I put it up.





Still waiting for my OK tag........hint hint

 

[Lyndon]

Hey!

I can't see any yellow (NSW) plates in those photos. . [emoji33]

Lyndon
At Trivia, but I'm still look in'! ! ! [emoji6]


Sent from my iPhone using Tapatalk

 

[dlcwent]

Hey!

I can't see any yellow (NSW) plates in those photos. . [emoji33]

Lyndon
At Trivia, but I'm still look in'! ! ! [emoji6]


Sent from my iPhone using Tapatalk

You guys have your own wall. Ain't that special.

 

[Lyndon]

You guys have your own wall. Ain't that special.

WHAT! We ain't that special?



Lyndon
Just muckin' around.


Sent from my iPhone using Tapatalk

 

[oldironfarmer]

So I am finally updating the wall. Thank you Cuda. And Bob thank you, I told you I had to find a frame before I put it up.





Still waiting for my OK tag........hint hint

Oh yeah! I'm behind all around. Thanks for the reminder!

I've been wondering where you'd gone, good to see you back!

 

[Bob Heine]

Dan, your wall honoring convict labor, beautiful women and the elderly looks great. The wall for "special" people also looks pretty good.

 

[taumac]

Dan, just so you don't think I forgot. I do have something for your wall of fame but being you're going to be down here in a few months i thought I'll give it to you in person.

 

[Terrick down Under]

D, I have every state of the US covered for plates, the oldest is a 1956 Californian and the newest is a 1992 Maryland. They are all alphabetically on the cupboard doors above the benches. I have a couple of Asian and a couple of islands, but still more to go.

 

[xtremek]

Is being guilty of being a neanderthal a bad thing?

 

[nine4gmc]

Awesome wall Dan!

 

[oldironfarmer]

You know the three big lies

1 It's in the mail
2 It's on the truck
3 Of course I'm safe

Well, it's in the mail

(intended to be a hostage photo, you know I've got it if it's on the broom machine, or somebody's broom machine)

 

[dlcwent]

Why thank you Andy. (I think ) If it's in the mail, when I get it, I'll proudly display it on the wall.

Bob, you said it eloquently. Old, convicts, women..........let's see what could I possibly add to that: I'm open to suggestions guys.

Gerard, I figured you'd be part of the wall at some point. Oh wait a minute.........you ARE going to become ANOTHER WALL shortly, who can beat that?

 

[CudaChick1968]

It's my pleasure Dan. I'm honored to be a part of it. < curtsey >

 

[Richard Cranium]

Just checking in Dan, Not sure my wife would approve of Leanna being on top. lol

 

[oldironfarmer]

It's my pleasure Dan. I'm honored to be a part of it. < curtsey >

How can a < curtsey > be so nice?

 

[Duker]

So I am finally updating the wall.

I am digging the wall... however, that's a pretty tough crowd to compete with, I don't have CudaChick's legs or powder **** creativity, nor Bob's skills, knowledge, or collection so do you have like a little dusty corner for the rest of us lowly GJ commoners...

*

 

[Grizzly Guy]

I'm with Duker on this one.My plan was to deliver a plate perssonly,but with our dollar in the s#####er,not going to happen this year.

 

[Bob Heine]

I am digging the wall... however, that's a pretty tough crowd to compete with, I don't have CudaChick's legs or powder **** creativity, nor Bob's skills, knowledge, or collection so do you have like a little dusty corner for the rest of us lowly GJ commoners...

*

Dan, I believe the creator of one of the drool-worthiest welding tables on the GJ (the world?) is calling himself a commoner.

 

[Terrick down Under]

Grizzly Guy, if you think "but with our dollar in the s#####er,not going to happen this year", then watch our dollar bounce around from 75c to 55c in the USD.

 

[dlcwent]

I am digging the wall... however, that's a pretty tough crowd to compete with, I don't have CudaChick's legs or powder **** creativity, nor Bob's skills, knowledge, or collection so do you have like a little dusty corner for the rest of us lowly GJ commoners...

*

Duke, I think Bob may have a good point. Maybe you should have your own wall. I'll see to it that you have a dusty corner.

I'm with Duker on this one.My plan was to deliver a plate perssonly,but with our dollar in the s#####er,not going to happen this year.

Grizz, As much as I would like you to personally deliver something to add to the wall, I'll be happy to wait until it can happen. But if something shows up before then I'll proudly add it to the collection.

Dan, I believe the creator of one of the drool-worthiest welding tables on the GJ (the world?) is calling himself a commoner.

I had to quote you on this one Bob as Duke needs to hear it from more than me.

All of you guys.........Thanks for stopping by and helping this thread have a little more life.

 

[Duker]

Dan & Bob, thank you for the comments but I feel privileged to even be considered for the "dusty corner."

I may have to try and a deliver a little Texas sized something personally like Grizzley Guy! It's been too long since I visited my favorite plane maker in Warren or perused through the bins of goodies at Liberty Tool in your part of the country.

Regards, Duke

*

 

[taumac]

Dan, I believe the creator of one of the drool-worthiest welding tables on the GJ (the world?) is calling himself a commoner.

Either can I? Duker has mad skills and has made some awesome projects as such as his welding table and some of toolbox hutch projects. No dusty corner for you sir![emoji482]

 

[JC23]

Hey, Dufus!

You need an Ohio plate? You can pick one up when you come to the swap meet in Canton, OH this weekend. I bet you beat Kevin outta his usual long distance award.

Hell, I'll even buy ya that Ohio plate! Like Shorty says, ROAD TRIP!

 

[dlcwent]

Hey, Dufus!

You need an Ohio plate? You can pick one up when you come to the swap meet in Canton, OH this weekend. I bet you beat Kevin outta his usual long distance award.

Hell, I'll even buy ya that Ohio plate! Like Shorty says, ROAD TRIP!

There you go again. Showering me with all your love. Dufus is something my wife calls me, so I take that as a name that means "dear to my heart"

Thanks JC....I think you're okay too.

And I'm sure you're too cheap to spend the money it'd take to mail me a plate.

 

[taumac]

Dufus is something my wife calls me, so I take that as a name that means "dear to my heart"

I think my wife has called me everything under the sun. LOL.

 

[JC23]

And I'm sure you're too cheap to spend the money it'd take to mail me a plate.

Sounds like (cough, candy ***, cough) you're not gonna join us at the swap meet...Oh well, you'll miss some killer NY pizza!

 

[dlcwent]

I've been wanting a lathe for a long time but the right deal hasn't come along until this past weekend. I found this little puppy about an hour from my shop. It's a Logan 820. I'm still researching the year it was made. The former owner thought it was around a 1945.







I haven't got the motor mounted yet.



The previous owner had no way of loading it as an assembled unit so he had to take it apart and we loaded the pieces. He had no manual to give me. I don't know if any of you noticed but when I reassembled it, I mounted it backwards on the tray. So now I've got to get it turned around before I can mount the motor. More pictures to follow when it's up and running.

 

[oldironfarmer]

Mighty fine Logan!

It sure looks clean! We could use some closeups of the ways...

Do you know how to grind tool steel?

 

[xtremek]

Excuse me sir, but you...............****. Very nice lathe.

 

[Duker]

Excuse me sir, but you...............****. Very nice lathe.

Ditto! Definitely a nice score!


Sent from my iPhone using Tapatalk

 

[Grumblebum]

Nice score dan

 

[1/2 Cup]

Dan, as above YOU **** big time..

Great score.

Regards

 

[oldironfarmer]

Wait til he tells us the P.O. gave it to him

 

[dlcwent]

Here you go Andy.






And to answer your question. No. My only experience with lathes is from different kinds of lathes. Years ago I worked as a optical lab tech. We had glass lathes as well as metal lathes to cut the tools we used in the polishing process. So this will be a learning curve for me. Any advice anyone care to share with me?

And no the guy didn't give it to me but I don't want to tell you guys that I paid $500.00 for it 'cause then it would sound like I was bragging again.

 

[DonPowers]

Nice addition Dan.

 

[Terrick down Under]

D, better send it back for warranty...........the flat head screw in the bed is NOT clocked! LOL

 

[cbacres]

Dan, that's a you **** deal. Nice score, it's in great shape.
There fun to use, I need to extend power to mine to get it up and going.

 

[nine4gmc]

You stole it!! Great score Dan, you're going to love it!

Sent from my SM-T230NU using Tapatalk