Tools from the old world

[Deutschmann]

a bucket from JOPA

Wieviel Liter?

 

[decaf]

I think wurth´s sets are pretty good, i have been using them for a time now, and it works very nice...

Here is some socket sets from Wurth

Wurth socket set 1/4" and 1/2"

 

[Lofthouse]

CK Magma Tool Roll, Schröder PH3/PZ3, Dogyu prybar, Gedore 1B 13mm

 

[sljeme345]

This are the first fine teeth socket sets i have.
I was convinced that the sockets by Koken, one mechanic told me.

I think wurth´s sets are pretty good, i have been using them for a time now, and it works very nice...

 

[upgrading]

No COO info on this.

 

[Mr MoAiZo]

I would be interested to know who the OEM for these boxes is.

http://www.l-boxx.de/en/products/


http://www.tanos.de/default.asp?navid=100302&lid=En&oid=007

 

[sljeme345]

No COO info on this.

Nice found

Two months ago I bought a similar tubular socket wrench set.
The saler told me set is manufactured in Germany. Here is picture, sory for bad quality.

 

[Qualitytools]

This is a new complete Stahlwille torque wrench set with 39 insert tools - arrived today!

WOW!! That is such a nice set and I can see where I could use something like that while working on my cars as those interchangeable heads come in very handy. I am afraid to ask but I will How much is a set like that selling for?
Enjoy as that is Soooo Nice

 

[ATK305]

WOW!! That is such a nice set and I can see where I could use something like that while working on my cars as those interchangeable heads come in very handy. I am afraid to ask but I will How much is a set like that selling for?
Enjoy as that is Soooo Nice

Wow! That looks amazing. Not like I would need all of those Fittings but what a comprehensive set.

 

[MARCIOCRM]

Wooden plane made in Czecoslovakia

Pretty nice tool!

 

[Quattroporte3]

Facom AS (Anti Slip) combo ratcheting wrenches and Facom 1/2" Socket set with the new sealed ratchet. Just came in today. I have some USAG stuff in my main toolbox as well as some Knipex and Stahlwille, will take a few pics later.

 

[Monte]

I don't suppose they are waterproof are they Monte ?? Stacking service cart in a factory with removeable specialist boxes is my thought.....?

i think they´re only resistant against splash water. They don´t have a seal.

Wieviel Liter?

12

I would be interested to know who the OEM for these boxes is.

www.sortimo.com
















tools in action:

pre drilling

drilling

screwdriving

finished

 

[node105]

Kukko 2-way and 3-way puller set delivered this afternoon.

K-2030-10

Turning the pulling hooks enables them to be used both internally and externally.
100-350 mm

 

[Blöckw@rt]

Not comparable to Stahlwille !

Proxxon Micro-Click 200/5 torque wrench.

Older version with no quick release.

 

[rice rocket]

Kukko 2-way and 3-way puller set delivered this afternoon.

K-2030-10

Turning the pulling hooks enables them to be used both internally and externally.
100-350 mm

In an L-BOXX too, awesome!

 

[node105]

Some Lockweiler Stala set STS6 and STS9 delivered last week. Made in Germany; only stamped on the packaging, nowhere on the bins.
I had to buy these locally ($32 AUD)
I searched through my list of German suppliers, could only find Zoro that appears to ship overseas.

Also some REMA TECHNIBROSSE brushes for shellac (bought from the US).

There is a business in Paris Rem'art , that appears to sell this brand. Anyone know them?
http://remart.fr

And some wooden screw clamps made by Dubuque Clamp Works, USA.
some 5", to go with 8" and 10".

 

[maico]

Compac 1.5T-HC jack. Low entry 98mm (under 4 ") High lift 800mm (31 1/2")

The back of the arm at the stickers is 6" from the ground in the lowest position.

Made in Denmark like it's nearest competitor AC-Hydraulics.

In action. The front jacking point is way back on the subframe. Only a long low entry jack design can lift in one go without messing about with jacking the sill.

 

[Blöckw@rt]

My collection of adjustable wrenches is still growing.

 

[handtools-from-germany]

WOW!! That is such a nice set and I can see where I could use something like that while working on my cars as those interchangeable heads come in very handy. I am afraid to ask but I will How much is a set like that selling for?
Enjoy as that is Soooo Nice

This complete set will cost 1370.20 USD incl. DHL premium worldwide shipping. This price is for countries outside the EU - without German Tax.

 

[Coventry]

Lovely 406.
Is that a D9 (looks like it's on a W)?

 

[maico]

It's on a W but is a 2.9 Litre D8. Back in the day it must have sat unsold at a dealer for sometime.

Without the D9's electronics it's proved 100% reliable in the 5 years I've had it.

 

[Monte]

I don't suppose they are waterproof are they Monte ??

made a little test

<iframe width="640" height="480" src="https://www.youtube.com/embed/me26_9QwqI4" frameborder="0" allowfullscreen></iframe>

Stacking service cart in a factory with removeable specialist boxes is my thought.....?

mobile tool/parts storage solution for trucks/vans
www.sortimo.knapheide.com

 

[3baygarage]

Hi guys, I picked up another old wrench today. Very heavy duty 27mm x 28mm box wrench.

France is the country of manufacture.

Eternum is the brand but it was hard to make out, plus I'm unfamiliar with it. Tough to take a picture as well due to round beam and chrome wear. I see online few examples of this brand.

It reminds me of early Blue Point and Williams round stock wrenches of the 30's-40's

Can anyone roughly tell the date of manufacture?

 

[AV tinker er]

I'm sold, German tools are just as good or better than American. I have a new sub addiction to my tool addiction.

 

[Luis Arturo]

Pretty nice tool!

I live in Peru and I'm always looking for European or American vintage tools. I was lucky to find this new, but old Czech plane.

I bought a small stand of tools, balances and scored from a hardware store because I love ...

 

[rmsg0040]

In action. The front jacking point is way back on the subframe. Only a long low entry jack design can lift in one go without messing about with jacking the sill.

What jackstands are those?

Thanks

 

[Qualitytools]

Facom AS (Anti Slip) combo ratcheting wrenches and Facom 1/2" Socket set with the new sealed ratchet. Just came in today. I have some USAG stuff in my main toolbox as well as some Knipex and Stahlwille, will take a few pics later.

I have the 467 but not the AS, I like how they feel in the hand and I have used them multiple times they are Great! Enjoy

 

[Qualitytools]

This complete set will cost 1370.20 USD incl. DHL premium worldwide shipping. This price is for countries outside the EU - without German Tax.

Thanks for the reply If I earned my living working on cars I would buy them in a heartbeat but....... Even with my college degree and my hobby of working on my own cars I could not justify it. Oh well, one can dream right?

 

[jetdawg]

Nice kukko puller set.

I got two 4" irega adjustables one silver and one black oxide love these things.

Nice vid monte, heard the famous breathing lol.

 

[maico]

What jackstands are those?

Thanks

Draper AS6000. 22" lowest to 34"

Also marketed in the UK under the SIP brand in a black finish.

I was going to buy some Danish Compac stands but I saw these Chinese made ones at 50% off on Amazon. As it turned out it was just a tatty box !

No chance of getting crushed under heavy duty stand like this

 

[Monte]

Take this rake Monte:

https://www.biber.de/artikel/1/926188/laubrechen-mit-greifer/

Nice vid monte, heard the famous breathing lol.

Freund 36 volt cordless hedge trimmer

 

[hautpot]

First ever PB for me, I will say that I'm going to purchase more!

 

[Henning]

First ever PB for me, I will say that I'm going to purchase more!

I think most people who buy PB quickly ends up with more

I'm no stranger to good tools but was completely taken by surprise by the quality of the PB tools. And especially the bits. I currently use Wera, but I seriously consider going PB instead. If it had been a bit easier to get here I probably would've.

For everyone considering PB, be warned! Highly addictive!

 

[hautpot]

Yeah what sold me was this exact thread of others P Baumann's tools. I then watched their company video and was amazed at the shear dedication to perfection. I finally ordered this set and it exceeded all my expectations.

 

[Monte]

Some more Wolf-Garten items:

 

[sljeme345]

NOS Belzer double ended ring spanners no.2 (11-32)





Belzer Dowidat 177 pipe wrench 1/2"-1"

 

[rice rocket]

Freund 36 volt cordless hedge trimmer

Huh, interesting. I have the 18v Metabo version of this.

Really sharp from the factory and plenty of power.

 

[IWANTBLUE]

Awsome Monte thanks!!!!!

Now if you can just try a high pressure washer now please, or a steam hose maybe ?? As that's what they used to blast my toolboxes with lol....
Seriously, that's great Very helpfull, they're maybe a bit steep, but specific job separated tools could be handy for more specialist gear...

Thanks !

Sent from my Nexus 4 using Tapatalk

 

[Monte]

Huh, interesting. I have the 18v Metabo version of this.

Really sharp from the factory and plenty of power.

Freund offers a couple of rebadged Metabo hedge trimmers for the DIY user [red] and the pro [green (w/double ground blades/double gear reduction)]

Awsome Monte thanks!!!!!

Now if you can just try a high pressure washer now please, or a steam hose maybe ?? As that's what they used to blast my toolboxes with lol....
Seriously, that's great Very helpfull, they're maybe a bit steep, but specific job separated tools could be handy for more specialist gear...

Thanks !

Sent from my Nexus 4 using Tapatalk

i´ll see what i can do
Simply buy Bosch tools so you get the L-Boxxes for free














Zinck Lysbro leaf rake

 

[WMS PERFORMANCE]

hello all