upgrading
Well-known member
Monte what is the Knipex plier right in front of the set of Plier Wrenches called ?
Is it out yet ?
Is it out yet ?
Tools from the old world
- Thread starter Monte
- Start date
marlinspike
Well-known member
Any of you have access to Metabo 627077000 (the right angle quick chuck that has the red ring but is not limited to low torque) and can tell me how deep the chuck end is (i.e. how much clearance it needs to fit)? I'm trying to see if it is much smaller than the right angle chuck for the LTX.
Pretty sure they're made in China, just FYI.
Like Pozidriv wrote:
Siphon- and Connector Pliers
http://www.knipex.com/index.php?id=1216&L=1&page=group_detail&parentID=1368&groupID=2327
Car parts dealer exhibition pics (Part 2/2):
Hazet
Porsche Limited Edition box available in white and Black:
wheel and tire pressure sensor tools:
air tools:
new heavy duty XL wrench sizes 36 and 41mm:
boxes...torque tools...
new cart:
drawer...
more boxes....
special tools:
more air tools feat. new butterfly impact:
Last edited:
dutchgray
Well-known member
Is it just me or is the 41mm 600LG not as long as the 36.
Will have to buy at least the 36, have the other 12 sizes already.
Just looked it up
36 is 580mm long
41 is 600mm long
Will have to buy at least the 36, have the other 12 sizes already.
Just looked it up
36 is 580mm long
41 is 600mm long
Last edited:
tiktianc
New member
Hey,
Recently picked up this is Bahco 714 ratchet, it's a 1/2" push through design with 12 teeth. It's got a fairly interesting gear and pawl, with the pawl being a little 6mm steel rod, and a fancy looking machined gear...
Seem to have narrowed it down to probably between 1954 and 1968 based on the the logos of the adjustable spanners they made at the time (namely that they changed from AB BA Hjorth to AB Bahco in 1954, albeit can't seem to find it when they changed the don't of their main logo to the later more angular one)
Anyone know anything more about these?
Sent from my MIX using Tapatalk
Recently picked up this is Bahco 714 ratchet, it's a 1/2" push through design with 12 teeth. It's got a fairly interesting gear and pawl, with the pawl being a little 6mm steel rod, and a fancy looking machined gear...
Seem to have narrowed it down to probably between 1954 and 1968 based on the the logos of the adjustable spanners they made at the time (namely that they changed from AB BA Hjorth to AB Bahco in 1954, albeit can't seem to find it when they changed the don't of their main logo to the later more angular one)
Anyone know anything more about these?
Sent from my MIX using Tapatalk
Attachments
GForceJunky
Well-known member
- Joined
- Apr 18, 2011
- Messages
- 562
I think this is a rare Record..made in Germany!
What do you think guys?
Sent from my SM-A510F using Tapatalk
I have almost this exact one (the head is more rounded on mine and has many more, but much finer teeth) and a few others in different sizes from my grandfather with the exact same markings and COO (Germany). Haven't been able to find a brand marking on any of them - is it Record? Would definitely like to know!
Attachments
Reed Prince
Well-known member
Lindstrom TRx8180 & Rx7891
The cutters were a real bargain. I can only guess that the seller I got them from a while ago bought them by accident, thinking they were a smaller jewelry tool, and sold them at a loss.
I like the fact that the spring can be easily slid behind the tool arm, allowing them to be stored in a closed position.
The cutters were a real bargain. I can only guess that the seller I got them from a while ago bought them by accident, thinking they were a smaller jewelry tool, and sold them at a loss.
I like the fact that the spring can be easily slid behind the tool arm, allowing them to be stored in a closed position.
Monte you askt some more pictures,
Very nice collection of Belzer
Monte you have nice collection of Wolf Garten tools
Yes is is a Record from my grandfather. I find "new" old tools every time I am looking around our garage and shed, drawers, cupboards, etc.[emoji16]
Sent from my SM-A510F using Tapatalk
never seen a Record tool over here...
Hey Monte, is any particular size you are after and made in UK, US or Germany? I may find one in the boot sale in the UK and post it to you. W
Sent from my SM-A510F using Tapatalk
hautpot
Well-known member
koken can be punched out
Thanks ! Still growing....Monte you have nice collection of Wolf Garten tools
Thanks for your offer ! But i already have sooo much stuff so i only buy/collect what i really need because otherwise i would have to rent more space
Allit storage bins
for sandpaper:
superautobacs
Well-known member
Lindstrom TRx8180 & Rx7891
What a good score!
I wonder who first started the convertible joint idea.....Bahco or Lindstrom. They are both under the SNA Europe brand and I would assume come from the same production line.
Do the grips on the Lindstroms have Bahco's "Ergo" trademark molded in?
upgrading
Well-known member
Good stuff.My "old world" tools collection ...
Those Wiha Blue and light brownish insulated drivers(front left), are they being sold now or a past item ?
I Don't recall seeing that color scheme .
marlinspike
Well-known member
Can one of you guys in Europe as your Metabo dealer if he can get 627069000 (USA 10.8V charger) and if so what the price is. Despite being made for the USA, we can't get it here.
Carquest
Well-known member
Anyone have a Facom tool cart?
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Those rebranded Wiha tools in blue scheme still sold by Hager, trough their ProMont shop.
http://www.hager.cz/promont-shop/nabidka-profi-naradi/98745.htm
upgrading
Well-known member
Interesting they have a few tools with that color scheme.
upgrading
Well-known member
I wonder if we will see made on planet earth next ?
Nigelhirst
Well-known member
Switzerland, I'm afraid:
https://rothrist.shop.ferroflex.ch/...69000)-METABO_ME627069000/?markId=ME627069000
47SF