hellagood_02
New member
- Joined
- Feb 26, 2013
- Messages
- 1
Hello all,
I have an old, large, wilton bullet style vise/pipe vise that I am trying to identify. This vise has "Wilton Schiller park Ill USA" on both sides. The only other visible marking is the number 101065. I have not disassembled the vice to look at the keyway for a date.
The vise measure 23" long, base is about 10" wide, and the overall height is about 14". The jaw width is 6", the jaws open about 10", and the depth is about 7 1/2". The pipe jaws are 3 1/4" x 2" and appear to be a double type that will accommodate both tubing and pipe. This unit also has the anvil pad and a double locking 360 degree swivel base.
Any insight would be greatly appreciated
Keith
I have an old, large, wilton bullet style vise/pipe vise that I am trying to identify. This vise has "Wilton Schiller park Ill USA" on both sides. The only other visible marking is the number 101065. I have not disassembled the vice to look at the keyway for a date.
The vise measure 23" long, base is about 10" wide, and the overall height is about 14". The jaw width is 6", the jaws open about 10", and the depth is about 7 1/2". The pipe jaws are 3 1/4" x 2" and appear to be a double type that will accommodate both tubing and pipe. This unit also has the anvil pad and a double locking 360 degree swivel base.
Any insight would be greatly appreciated
Keith
Last edited: