padronanniversary
Well-known member
wow, that was a great deal
HOT DEAL Index!!
- Thread starter Stuey
- Start date
- Status
Neohio
Well-known member
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110693711585&ssPageName=STRK:MEWAX:IT
i see 170ish still available
i see 170ish still available
Jeff
Well-known member
If anyone uses 4-1/2" flap discs on their angle grinders, Amazon has some decent deals on Pferd (Germany).
Pferd on Amazon
Pferd on Amazon
any particular grit recommendations for a noob? I've only used my grinder with grinding wheels and cutoff wheels so far... Those prices seem good enough to pick up some just to have!
Last edited:
Jeff
Well-known member
The prices were from $2-$5. I did compare them to Dewalt at Lowes ($8), and Dewalt on Amazon ($6).
I bought an assortment ranging from 24 grit to 120 grit. The 24 grit looks like course sand and is mean as hell. I would say the 80 and 120 grits would be most used, but nothing beats 24 or 40 for chewing rust.
The conical discs are angled slightly at 15 degrees, which is the recommended sanding angle when using these discs. I prefer the conicals, but at these prices I got some flat discs as well.
24
24
40
80
120
mrbreezeet1
Banned
Oh Thanks Guys,
Yeah, This site states it as GearWrench
http://www.toolsource.com/gearbox-ratcheting-gearwrench-metric-12pc-p-101052.html
Yeah, $120.00 shipped is a good price, guy at work has these, there real handy.
Nice for serpentine belt tensioners sometimes too.
Was $120.00 Shipped A Buy It Now?
Thanks,
Tony
Last edited:
Jeff
Well-known member
They make medication for your condition.
They do?
filtered
Well-known member
Buckgnarly
Well-known member
Yeah, for me it was but I searched for at least two months before I pulled the trigger.
Cripe has the SAE set right now for 60plus shipping...
http://cgi.ebay.com/GearWrench-8599...970?pt=LH_DefaultDomain_0&hash=item3a631137e2
9pc SAE version only $60+$12 from Cripe
http://cgi.ebay.com/GearWrench-8599...ultDomain_0&hash=item3a631137e2#ht_1780wt_799
Last edited:
It was posted a few days/pages ago before the welder fiasco. I waited a few days to order mine and many of them were sold out or prices had increased. Mine showed up today also though. The only thing im not keen about is the arbor. Its not threaded like the disc available to me locally are. But for half the cost Ill make due. Hopefully since this are minted in gemany and not mexico the abrasives will last a little longer and make them that much of a better deal. Im thinking of ordering a few more to stock up, but I would really hate to drop another $50 on them when I dont really need them right now
I like the discs in the 60-80 range. Go lower if you need to remove some meat, and go higher if you want to polish and the surface is smooth already. These discs are also more forgiving to your flesh than a wire wheel is, but it will heat the metal if left in one area too long. I like the flat discs for big flat areas, and the conicals for everything else.
Last edited:
gt eunuch
Well-known member
Found Vaughan hammers for sale at Home Depot today. Got a 24oz and a 16oz ball peen for $21 total. They also had a rubber mallet ( like estwings, with one black and one white face ) for 10 bucks as well.
Last edited:
mrbreezeet1
Banned
OK Thanks,
Yeah, SAE won't do me much good.
Funny how it's gotten.
thanks,
Tony
If you need metric you may consider searching for the 85988 "promo" set for a few bucks more:
KD85988 includes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19mm
KD85987 includes: 5 pc add on set sizes 20, 21, 22, 24, and 25mm
if you need the bigger ones, of course. gl
MilesToEmpty
Well-known member
- Joined
- Dec 14, 2010
- Messages
- 55
http://www.sears.com:80/shc/s/p_10153_12605_00935255000P?adCell=W1&i_cntr=1308207593912
Craftsman 255 pc. Mechanics Tool Set with Lift Top Storage Chest
| Sears Item# 00935255000 | Model# 35255
$149
Craftsman 255 pc. Mechanics Tool Set with Lift Top Storage Chest
| Sears Item# 00935255000 | Model# 35255
$149
mrbreezeet1
Banned
#
D85988 includes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19mm
#
KD85987 includes: 5 pc add on set sizes 20, 21, 22, 24, and 25mm
http://cgi.ebay.com/ebaymotors/KD-8...Z360368368316QQptZMotorsQ5fAutomotiveQ5fTools
2x Rubbermaid FastTrack 48" Rails $4.50 + Free Store Pickup @ Lowes.
http://www.lowes.com/webapp/wcs/sto...mmc=aff_gan-_-k1971-_-GAN_631415764-_-Primary
The accessories are crazy expensive though... but in case any one else missed the last gladiator deal and is interested...
http://www.lowes.com/webapp/wcs/sto...mmc=aff_gan-_-k1971-_-GAN_631415764-_-Primary
The accessories are crazy expensive though... but in case any one else missed the last gladiator deal and is interested...
Toolhorder
Well-known member
Not sure if any of your wifes coupon but mine got a Craftsman coupon in this mailer called vocal point and it works the same as a $10 gift card inside. Say's on the outside $10 off any C3 purchase so I tossed it in the junk pile. My wife read a coupon forum and apparantly they would like you to buy the C3 stuff but it's good on anything. Pretty nice!
It is 85988+85987. I believe it is EXACTLY the same as the 17pc 85989 set, except at a lower price (~$200 vs. ~$270).
It was a limited quantity promo, so there aren't that many sets left out there. Not too hard to find at the moment though.
Here's another place, ~same price as ebay posted by mrbreezeet1:
http://www.devildogtools.com/kdge85pl85ge.html
Last edited:
Must be the wheels. My HF cart smelled for DAYS until the smell resided. Thank gosh!
hornedfrog1985
Member
- Joined
- Jun 16, 2011
- Messages
- 14
I'm thinking about buying this compressor. I thought it was made by another good named company or something?
reedwesd
Well-known member
Found this sand paper deal on Slick Deals and seems like a good deal.
http://www.sears.com/shc/s/p_10153_...&blockType=G11&sid=I0084400010000100383&aff=Y
http://www.sears.com/shc/s/p_10153_...&blockType=G11&sid=I0084400010000100383&aff=Y
Must be the wheels. My HF cart smelled for DAYS until the smell resided. Thank gosh!
I didnt even think of that, it must be the wheels. I thought it was the belt that had CHINA written on it... but that probably wouldnt be that strong of a smell.
The tank has a large 'Proudly assembled in the USA' sticker/flag on it, but the compressor motor has China stamped everywhere on it. The description decal on the unit says it is a Sanborn engine.
Attachments
Last edited:
I have the previous version of the Kobalt 30 gallon compressor. It is the same model, but a different manufacturer. Anyway, it has to be about 5 years old, but recently I was doing a hardwood floor job and closed it up in an unused bedroom for the weekend. When I opened the door a couple days later it stunk like HF rubber in there. Those tires never give up that smell!
Yes, I got a set for under $200 from a link in this thread a while ago. 8-25mm are in the promo set.
Just wanted to say thanks for this deal. I used the "Reserve Online" feature on the Napa website and my local Napa had it ready for me to pickup in under 48 hours. I got the set of 10 for $35.99. Thanks!
-Bp
Last edited:
HF Stink
Rubber for sure from China has some kind of a funk to it, but I think maybe the oil coating for shipping is part of it. Smell is likely some kind of preservative, when it goes away the items may not last much longer, rubber go stiff etc.
GearWrench long pattern double set.
I decided to skip this one for two reasons, $200 is still serious money, and I think I would rather have a double standard box end instead of duplicating the size with a ratching box end. 27mm is the big size I use, not really 22 to 26.
Rubber for sure from China has some kind of a funk to it, but I think maybe the oil coating for shipping is part of it. Smell is likely some kind of preservative, when it goes away the items may not last much longer, rubber go stiff etc.
GearWrench long pattern double set.
I decided to skip this one for two reasons, $200 is still serious money, and I think I would rather have a double standard box end instead of duplicating the size with a ratching box end. 27mm is the big size I use, not really 22 to 26.
SCscoutguy
Well-known member
Sears has 2-piece Irwin GrooveLock Set (8" & 10") for $12.49 with free store pickup.
http://www.sears.com/shc/s/p_10153_12605_00914009000P?sid=I0084400010000100383&aff=Y
Sears has Craftsman 4" Bench Vise for $34.99 - 15% in cart = $29.74 + free store pick-up. Note, if buying 2 of these, add coupon code SEARS2011 for an additional $5 off.
http://www.sears.com/shc/s/p_10153_12605_00951854000P?sid=I0084400010000100383&aff=Y
http://www.sears.com/shc/s/p_10153_12605_00914009000P?sid=I0084400010000100383&aff=Y
Sears has Craftsman 4" Bench Vise for $34.99 - 15% in cart = $29.74 + free store pick-up. Note, if buying 2 of these, add coupon code SEARS2011 for an additional $5 off.
http://www.sears.com/shc/s/p_10153_12605_00951854000P?sid=I0084400010000100383&aff=Y
I actually bought that 4" Cman vise last week. Just FYI - it is made in China (obviously for that price). And there are no replacement jaws available. The manual gives you a part number, but when you punch it in at partsdirect, it says they no longer make/offer it.
Most of you probably hate this torque wrench, but i've had nothing but good experiences with both my 3/8" and 1/2" versions.
Sears has all of their Craftsman Microtork torque wrenches for 50% off/$40 this weekend.
http://www.sears.com/shc/s/search_1...ord=craftsman+microtork&viewItems=25&sLevel=0
Sears has all of their Craftsman Microtork torque wrenches for 50% off/$40 this weekend.
http://www.sears.com/shc/s/search_1...ord=craftsman+microtork&viewItems=25&sLevel=0
Craftsman instant workbench, $100 less than normal.
http://www.sears.com/shc/s/p_10153_12605_009C0486000B?prdNo=7&blockNo=7&blockType=G7
Oh, and all garage organization/workcenter stuff is between 20% and 30% off.
http://www.sears.com/shc/s/p_10153_12605_009C0486000B?prdNo=7&blockNo=7&blockType=G7
Oh, and all garage organization/workcenter stuff is between 20% and 30% off.
Last edited:
SCscoutguy
Well-known member
Sears has Craftsman Autoloading Multi-Bit Screwdriver for $12.74 w/ in-store pickup.
http://www.sears.com/shc/s/p_10153_...&blockType=G10&sid=I0084400010000100383&aff=Y
http://www.sears.com/shc/s/p_10153_...&blockType=G10&sid=I0084400010000100383&aff=Y
muibubbles
Well-known member
has anyone seen the home depot husky ratcheting wrenches? its a 5 piece set either sae or metric.. 20 bucks i believe... i was tempted to get it but then i put it down.. anyone have feedback on these?
- Status