pembol's latest activity
-
Ppembol reacted to manwithtools's post in the thread Miraco | (399-5) Underground Shutoff Kit with
Like.
I'd install the PVC Ball valve below ground, then install a piece of 4" PVC from the ground level to the valve, use the 1-1/2" PVC... -
Ppembol reacted to Stuart in MN's post in the thread Sourcing or Designing a Heavy-Duty Parallel Lift Door (Parallelogram Linkage) for Under-Porch Storage with Like.
Reminds of the storage bin door mechanisms on the side of Greyhound buses.
-
Ppembol replied to the thread Best direct-to-consumer Minisplit for heating in colder climates?.Seeing this old thread has been brought back to the top - I can report back. I did install the Blueridge/gree sapphire and now have had...
-
Ppembol replied to the thread Cooling my 6 Car Non-Insulated Garage.I think your ventilation plan is a good one - and it will help the garage be more pleasant in the mornings by having it be closer...
-
Ppembol replied to the thread Accurate; reasonably priced optical tach.Some of the various tachometer apps for iOS/Android work quite well up to a couple thousand RPM. If it is a dark enough area, the...
-
Ppembol reacted to dscheidt's post in the thread Mini split for cooling / dehumidification only with Like.
Heat load is entirely independent of the technology used to manage it. If a contractor gave me that line, I’d show him the door before...
-
Ppembol reacted to rlitman's post in the thread Need to descale my Open Loop Geothermal Coax. Any advice? with Like.
Because he said it is open loop. It's circulating ground water. But we also don't know what his ground water chemistry is like.
-
Ppembol reacted to kngelv's post in the thread Mini-Split vs Gas or Electric Heat in Detached Garage - Detroit Area with Like.
Summer update: My original purpose on the mini-split was to heat my garage quietly and efficiently this past winter. The Fujitsu did a...
-
PI kinda like the idea of two mini splits. You can get plenty of capacity that way, and maybe only run one at a time when you’re not in...
-
Ppembol replied to the thread Humidity control: what to do first?.If the heat is the wall heater in the photo, you may find heating with the minisplit to be better, also the cost differential for a unit...
-
PI'd run a load calc to determine sizing. When I chose my mini-split, I compiled a spreadsheet to build out a comparison of specs. I...
-
Ppembol replied to the thread Humidity control: what to do first?.Do a real load calculation, and decide if you want the mini just for cooling/dehumidification or heating as well. If you want heat...
-
PI can't speak to any of the electrical questions, but I can answer you on the EVSE and charge rate. I have a 30 amp circuit running my...
-
Ppembol replied to the thread Humidity control: what to do first?.A lot of folks are suggesting more ventilation, but that may actually make the issue worse. A others have said, the root cause of the...
-
PAn exhaust fan will cause more sweating on the floor because you are bringing in new humid air.