Recent content by thinktwicez71

This is inside the 1968 tank Sent from my SM-G950U using Tapatalk

I will have to inspect the new one still first . The newer one is slightly thicker according to the tag . What about materials on newer tanks vs older . Is one material better ? Sent from my SM-G950U using Tapatalk

I bought a Quincy 325 roc 10 on a 60 gallon binks horizontal tank pretty cheap to just have the compressor pump. The tank tag is 1968 and once I looked inside and saw all the rust on the bottom there is no way I feel comfortable with my life even if it did pass a home hydro test. The farm I...

I work at a really big farm and live almost next door , I used the cat tellehandler th63 to unload it , it'll be left in one place thank God lol Sent from my SM-G930V using Tapatalk

Like this , the leak i had was the bottom cap was loose. Sent from my SM-G930V using Tapatalk

No theres a big 1-1/4 one that's right after the head output and before the air cooled aftercooler. Sent from my SM-G930V using Tapatalk

I got all the leaks fixed in the piping . Mostly was the large check valve , now it holds at 120 psi for a week and not moving at all . Now I just need to correct the head leaks while pumping, and valve leaks Sent from my SM-G930V using Tapatalk

I haven't gotten to testing it , but what I should of said was the previous owner bought this new pressure switch before I bought this compressor and ran it for 2 months , so who knows he might of adjusted it . He had a large machine shop and lots of lathes , the air powered the chucks on the...

This is my Saylor beall 4500 compressor I got a few months back. 120 gallon vertical tank . Air cooled aftercooler included , no motor $100.00 < yes that's right. Had no motor , I got a 10hp baldor single stage for it and a new motor starter , works great . Needs a good cleaning and a few...

I got a steal on a Saylor beall 4500 air compreasor , no motor , but with the big air cooled aftercooler for $100. I got the new motor and .motor starter for it and it works great . Being a picky person I wanted no leaks on it . So out comes my bottle of soap solution and it leaks air at the...

Must need to be adjusted some , I checked it today and it's a brand new pressure switch that is supposed to be 175 off 145 on . I don't need 175 psi of air I'll prolly set it at 140-150 psi and then hook up a shop Filter Regulator Luber. There will be no shortage of air with this compressor...

Even with the valve open the compressor and motor stops at 120 tho , so Maybee it's not adjusted right for it ? Regardless I'm going to use it in valve closed and in start stop mode Sent from my iPad using Tapatalk

Ok thank you Sent from my SM-G930V using Tapatalk

I got it the motor on and all wired up for the motor starter . I temporarily wired it to fire it up and see how it runs . Runs great , pressure switch has it shutting off at 120psi. I left it pressurized and came out 2 days later and Its on 20 psi. It has an unloader plumbed with a valve on...

Both the black 6 guage are this as well , so I'm all good , thanks Sent from my SM-G930V using Tapatalk