Search results

Hey guys, I have came down to two options on c ok moressors. A. Curtis c90 with a 80 gallon horizontal tank, it is all complete and needs a electric drive motor to work. B. Dresser 400, this one comes with a 80 gallon vertical tank, but no motor or drive/driven pulleys. Anyone know the cfm...

Heres what I've got going on. 24x32x10 garage. 2 doors on the 24ft side. Im wanting to add on width wise and go higher but keep it all attached. Ideally add 24-30 ft of width and I need 14 ft ceilings. The current shop is a 4/12 pitch. I would also like to add an additional 2 (16-18ft) trusses...

I'm looking for some info on this old curtis I acquired. Any information, stories, or places to get parts will be appreciated!!

Does anyone know of anyone having a sale on hypertherm plasmas? I just missed one for 800 on amazon, saw it yesterday morning went to purchase it today and it still shows on the main page but not when you click on it! So now I'm backon the hunt. Thank you guys!

Hello guys I"m looking at some used shop equiptment..Lets start with the lifts. Rotary SP09-200, there are 2 lifts with serial numbers of AFL96C0047 and 48...September of 1996. One has a missing cable with a replacement in the mail.. Any insite on these? they appear solid my only concern being...

I just picked this up a few months ago got it out of a building where it had been sitting and drove it an hour home through some nice 2 lane blacktop. This car did awesome. I just found a 67 I want more! It is a 289/3 speed car with a pony interior. Interior is all original. It has been painted...

Hey guys I'm about to put a pole barn. Now I have never been around anything like a new construction project and my old man is to stubborn to help me with what steps I need to take. I have ground, the building has been quoted out at 47,800 (50x72x16, 2-14ft. doors etc etc). I have a guy lined up...

Hello, I've been tossing around this idea for awhile and when and walked through a gambrel style barn 36x52 with living quarters upstairs that sold me on it. Now here is the question. Does anyone have plans or know of a kit for this? This will be a full functioning shop. Right now I'm working...

I'm about to put up a 60x40 (may be subject to change). What is the best design you guys have seen as far as location of doors and office and such? My original thought was one door in the middle of the narrow end with the lifts angling off on both sides if need be. But what I ran into there is I...

How do people get there dealership logos in their U coat it floor coverings? very good idea that I'm thinking of adding in on a new building.

Hello all, Tomorrow I'm going to pick up a coats rc 20a tire machine (unless you guys say other wise :D) and going to look at a FMC 5800sc balancer. I can't find much info on FMC balancers? It is self calibrating and the right price with a ton of adapters. But it is a 3 phase. I only have...

Digging through my box found some old 1/2" drive impact sockets. one stamped canada and the other just CAN. These hard to find rare? worth anything?

Ok first up is a SK wayne 45170 3/8 ratchet -20 shipped Ok this is a Armstrong 3/16-15/32 Ignition wrench set in pouch-30 shipped Here is a 6-32mm Bonney double open in pouch all NOS never used I'm gonna say $65 shipped. This is a great set the ends are tighter than all of the metrics in...

Hey guys! I'm needing the following sizes in 1/2" dr. Deep 12 point 7/16 5/8 13/16 7/8 1 1/16 1 1/4 1 1/8 Don't care if there underline or new style. I have lots to trade if your interested also!

Ebay with a buy it now of $18 :D Needless to say I have som hard handles coming my way.

Hey guys just bought two snappy ratchets and need help Identifying them! the 3/8ths looks like it says ff-70m? and the 1/4 doesn't say made in the USA so is it a dual 80?

Went on a bit of a buying spree on eBay today :D I think I ended up coming out alright. And before you say it all the SK items were in hand ready to ship. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemVersion&item=250649003695&view=all&tid=0...

Hey guys! I have 2 Thorsen 77C's, 1 Giller Cs 43 and a Stevens Walden, INC 3118 spinite 1/4" dr. driver! Ok the two 77's 1 is VERY slightly better than the other, the closeups wouldn't turn out. But one looks almost NOS if it would be cleaned up a little bit better, the other I will call used...

I had to take some pics for insurance purposes and decided to post up some pics of part of my box and some of the more recent hauls i have gotten. 1.3/4 drive drawer chrome is 7/8-2" with most duplicates set next to their respective size Wright,Proto, John Deere. The impacts are metric smallest...

Hello I have a SW-320 1/2 socket labeled E for emergency use, or at least thats the way I understand it. Would like $10 shipped or pm for trades.