Search results

Needing to replace a little charger that went bad, an old 1 amp trickle charger. Really need one that could do a AGM battery in a ATV if needed and lead acid batteries. Looked at these at Advance...

Is there any harm in insulation over the double bubble reflective insulation when enclosing a room? If it is ok should faced or un-faced insulation be used when do it over the double bubble?

Looing at insulation to put in a ceiling in a enclosed room in the garage. It will have a loft above it, 2x8 ceiling joists. Menards has some unfaced R25 but is really too thick. I thought the facing was needed for a vapor barrier, am I wrong? Suggestions? This room is going to be heated and...

I would like to possibly put my Lincoln 225 and Hobart mig on a cart together. Possibly the 225 on a lower shelf and the mig on top. I thought it would take up less space and I would be able to moved it around to different plugs. Any suggestions?

Has any one tried this air hose? https://www.harborfreight.com/air-tools/air-hoses/12-in-x-50-ft-premium-rubber-air-hose-62882.html Tried the search with no luck.

Rapid air questions? I thought about using it but wanted to put the regulator close to the hose reel. Compressor has 165 psi, so I assume I would have to use the 3/4 kit even though 1/2 would do what I needed except for the pressure. Any other suggestions?

Got the coppressor wired up a date going but it builds up too much pressure popping get the relief valve. Called the store and they said bring it back but they don't have a other one. Starting to regret this purchase.

Should I use 6/2 or 6/3 wire?

What wire would be suggested to go from compressor to a load center? Compressor has 12/3 going from pressure switch to motor, so would 10/3 be ok? Manual suggests a 40 amp breaker though and says 23 amps at full load.

Air compressor says suggested 40 amp breaker. Would there be any harm in running a 50 amp breaker with large enough wire to utilize 50 amps? Thought about putting the compressor on a 50 amp plug so that it would give me the option to move the welder around the garage if needed.

We have a enclosed 12 foot lean too on our 30 x 40 pole barn/garage. We are planning on making a enclosed area in the lean too and wall off between it and the garage. It will be insulated with a ceiling. So there will be a few open feet that I planned on flooring for storage. What would you...

I plan on putting a disconnect on the garage to feed a barn. The barn already has #2 wire running to it , previously had an old farm house where garage is now. Still have that wire buried and will hook to disconnect. I know SE-R can be ran thru the walls without using conduit. Is there anything...

One in a auction this weekend. Wondered what is worth?

Wanting s 60 gallon air compressor. At first considered the Ingersoll Rand at Tractor Supply but have read several negative reviews about motor issues. I wanted something in that price range but the reviews concern me. I also considered the Quincy QT-54 but a little more money than I wanted to...

Building a new garage which is about 150 feet from meter on house which has a 200 amp service. Also need to feed a barn off the garage that a small 220 compressor can be used at least, it is about 100 feet from garage. I want to be able to run a 60 gallon air compressor in the garage, 220...

Anyone have any experience with these? https://www.samsclub.com/sams/linkable-shop-light-honeywell-led/prod20590154.ip?xid=plp1418-home:product:1:12 Wanting to light up a 30 x 40 garage.