Search results

This is a 2" x 1/2" hex bushing fitting that came off my Champion compressor. The material is iron but I do not know how to tell if it is cast or malleable. There is "250" stamped on it which I believe is Class 250 "extra heavy duty." There also is a stamped triangle symbol but I do not know the...

I'd like to organize a set of 26 wrenches, ranging from 6mm to 32mm (skipping 31mm) in a single "row." Ernst seems to only have a kit large enough to hold 20 wrenches which I presume would work for a set of 17 SAE wrenches (1/4" thru 1-1/4") but that would not be quite enough for a full set of...

Looking for NEW (unused) Snap-on flare nut crowfoot wrench, FRHM19. Must be the old style which is the stamped version, not the current laser etched version. Please PM if you have one to sell.

Just as what the title stated, where would be a good place to purchase their toolboxes online? I'm looking at their SHD series which is their top of line and in about the same category as the Snap-on and Matco boxes (at least their lower lines). After reading previous threads, I am going to...

I'm looking into ordering some KD hose pliers such as for pinch-off, hose clamp, and push-off. I noticed some of their pliers part numbers has changed slightly as they are adding "D" next to the original number. For instance, the original 3976 pliers are now re-identified as 3976D...

After moving here in South Dakota which is known for harsh winter with temperature dipping to 30 below on some nights, I figured that I should get a good pair of booster cables to keep with my Silverado 2500HD. So I purchased this cable which is 2 gauge, 20 feet long and should handle 500 amps...

I'm thinking about 1/2" drive with 50-250 ft-lb range and 3/8" drive with 20-100 ft-lb range. Still haven't decided whether if I'd be going with micrometer or split beam. I know alot of you here (through search) have said that split beam is superior to micrometer for durability & long term...

I am thinking about upgrading to CMI and/or PI (Precision Instruments) CLICKER STYLE torque wrenches. As you know, they come in many different options (drive size & torque range). Just am curious what torque range you have for each drive size. Also I'm curious which drive size you have in...

I am in process of setting up a fastener storage system and am curious how often 7/16" bolts and nuts get used? I cannot remember the last time I needed one in that size or maybe I just did not notice. I could say the same thing about 9/16" but what about you?

I understand that Metabo quick change feature allows you to easily switch discs without any tool by using their special clamping flange/nut. However, what about screw-on wire wheel or flap disc (like Walter) in which you use without the special clamping flange/nut? Can you use the quick change...

I plan to purchase a Milwaukee 4270-21 compact magnetic drill press and am looking for a good source of decent USA made annular cutters. Milwaukee says this machine uses 3/4" Weldon shank. So while searching , I ran into Hougen website (they also make magnetic drill presses) but according to one...

Snap-on Flake Drive Combination wrenches (gently used): 8mm - OEXM80B - $15 SOLD 9mm - OEXM90B - $15 SOLD 1/4" - OEX8B - $15 SOLD 5/16" - OEX10B - $15 SOLD Also have Snap-on 4-way Angle wrenches (like new - may have been used a time or two): 13/16" - VS26B - $30 SOLD 7/8" - VS28B - $35 SOLD

I have a 2.5lbs Amerex model B417T class ABC fire extinguisher with dual strap vehicle bracket. I also have a 10lbs Amerex model B456 class ABC fire extinguisher with wall mount hanger bracket. Both are brand new and never put into service. They were recently made in 2013 so there should be no...

I am looking at Wilton Tradesman and Combo vises ... they seems to be similar in alot of way but the Combo cost about twice as much as the Tradesman. What are the differences that makes the Combo worth 2x as much as the Tradesman?? :headscrat

In addition to assorted sizes of straight pipe wrenches, do you find the end pipe wrench to be useful in some cases? I already have a "set" of straight wrenches ranging from 6" up to 24" but found out with a recent project that having a pair of identical sizes would have been handy. I'm talking...

While I was browsing Northern Tool, I noticed that the Milwaukee 6190-20 (14" dry-cut saw) is missing so I googled it and noticed that some retailers are not stocking them anymore. So I went to Milwaukee website and found this: http://www.milwaukeetool.com/power-tools/corded/6190-20 It says...

I recently received my warrantied Knipex pliers in the mail. As expected, I see a barcode printed on the handle so my thought was no problem, I'll just rub it off with gasoline and rag. After trying a few times, it barely removed the ink at all :mad: I was surprised as I have done this method on...

I have a 12,000 watts (continuous) portable generator and soon will be hooking up to the building supply line. The propane company came last week and installed a pipe teed past the low pressure regulator. I just ordered a conversation kit but while I was talking with the salesman, he asked what...

Can bi-metal hole saw (with magnetic drill) be used to drill a hole in the forklift tine? Not sure how it would perform on a hardened steel. The material is about 1/2" thick near the tip.

I'm thinking about getting a couple larger cylindrical carbide burrs to enlarge some holes. I've used 1/2" burr on my 1/4" die grinder (air powered) with good success but my result could have been more consistent if I had use larger burrs like 5/8" and 3/4". Before I fork down the $$, should...