Search results

I have the original Snap-On ECFHKY (350 lumen) puck lights which I love. I am thinking of getting more. I also see that Snap-On has ECPRBO42 (400 lumen) and ECPRA072 (700 lumen). I found a Maxxeon Cyclops that makes both a 350 and 750 lumen for like $27 and except for the light, looks...

I have a home made continuity tester that has saved me hundreds of times. The wire leads are cracking because they have been wound up hundreds of times. I want to replace them with wire that is made to wind up. I am looking for wire that is either #14 or #12 , 6' in length. Any...

After learning how to sharpen chainsaw chains, I now have many dull chains I would like to reuse. I have noticed that the sprocket side is kind of sharp. Is that a problem with the bar and sprocket?

What lube should I use on the clutch needle bearing and can I wash out the air filter or just blow it out gently. Thanks.

I have a Stihl MS 211c and was wondering if I can change from green to yellow chain and also, would I have to change out the bar and or sprocket? I have been running 3636 005 0055 63 PM3 55 green chain and was thinking of going to 3617 005 0055 63 PS 55 yellow chain. I mainly use this saw on...

I have an Anderson window in my garage attic that a bird flew into and cracked. It is like 25 years old. I never had an Anderson window problem before. Could a glass place put in new glass or should I go to a lumberyard to order up a new sash?

Are Stihl or Husqvarna gloves any good? I see them and they are pricey, but if any good, I will buy some. I am clearing fence rows handling brush, fire wood and prickers.

Are those Stihl 2 in 1 chain saw sharpeners any good? Or, are those Stihl file guides any good? I got a gift card and was going to spend it on something. I am ok with a round file but sometimes it cuts too low.

I have been getting some new tools cheap...for free. How, I have been going through my stuff and discovered tools for one reason or another, I never used because I did not like them at the time and just left them alone. Some examples, wobble extensions. I bought a few in 1/4", 3/8" and 1/2"...

I am running out of space storing socket extensions. I have them flat in the drawer fit together like puzzle pieces so I am pretty maxed out storage wise. I was thinking about getting a magnetic panel and sticking some new extensions on the metal sides of the drawer. Has anybody tried this?

I was wondering if anyone makes a plastic plier holder/ divider for 6 or 7 pliers and not the standard 10? My drawer has a metal divider that I am trying to work around.

I have a Snap-On 7115 that is still used for front line work. I like it. I changed the gear from 20 teeth to 24 but was wondering if I can upgrade to 32 teeth? I have a gear from a SL-710 in it now that is 32 teeth. It works fine but the gear does not go all of the way through the bushing...

I have impact swivel socket sets and was wondering if impact wobble extensions would be something additional to get?

Is the search feature working? I tried a few and no luck. As a test, I tried "Snap-On" and no hits.

I am looking at getting some 7/32" chainsaw files. What brand lasts the longest and cuts the best: Husky, Stihl, Oregon, some other brand?

I need a 40 W soldering iron. My Snap-On (Wallenk) of 20 years died. It worked very good for me. Should I go Snap-On (Wallenk) again or try Weller? Not concerned with price, don't want a soldering station and don't like an instant gun type unit. Thanks.

I am rebuilding my Black & Decker #361 1/2" slow speed electric drill. I want to verify how much grease to put in the gear nose cone. I am thinking kind of full but some air space like I found when I took it apart.

Where can I get brushes and caps for a Black and Decker# 361 drill? What oil should I use to lube the motor?

Where can I get brushes and caps for a Black and Decker 361 drill? What oil should I use to lube the motor?

I posted last week on this topic. One of the responses recommended Starrett but at $85, it is too much for me. Can someone recommend one that is ok for bolts and drill bits, won't ream out with just a few uses say up to $20?