Search results

  1. U

    Car lift - is it worth it when you're old

    69 years old, good health, just creaky joints, have a nicely finished 30' x 40' shop. I'm struggling on whether to install a 4 post lift. Life expectancy is maybe 14 more years for males my age. At this age, I start to view expenditures with time frame considerations i.e. how much time do I have...
  2. U

    Jack Olsen on Joe Rogan podcast - 12 gauge garage

    Well, he wasn't on Rogan's show, but Rogan spoke about him by name,he spoke about the Porsche ( Rogan loves that car), and his garage on his latest episode with Bill Burr. He said that Olsen knew nothing about cars or garages prior to building his garage and acquiring the car, not sure if...
  3. U

    100A shop feed - correct wire to use

    I have an existing shop with a 100 amp panel. The 4 wire cable has been run underground from the shop sub-panel to my house basement and terminated in a suitable plastic box. I have no questions or concerns regarding this cable. Within the basement, I must run a 60' cable to the existing 200...
  4. U

    Who makes the tools we use

    Not sure if this was already posted. Click image to enlarge.
  5. U

    test

    test
  6. U

    Wood burning furnace in basement – improving efficiency

    Gentlemen (and ladies), I have a 2 story house, primary heat is via a natural gas-fired furnace. The original owner installed a wood burning furnace in the basement (see the attached pic) and never used it. It does have the required separate flue and works well. The WB furnace is not connected...
  7. U

    Test

    test
  8. U

    Winter car storage concerns

    I have a heated pole barn, I'm considering renting out unused space in it for motorcycle/car/boat storage. Anyone doing this ? Concerns ? Is it worth it form a $$$ standpoint ? Anyone done it and had issues ? What are the terms that you enforce to customers ? I would think that car owners...
  9. U

    Trying to repair a split tree bolts(s)

    Trying to repair a split tree bolts(s) I have a tree that split down the middle from high winds, about a 5' long vertical crack. The crack extends from about 2' off the ground, and up 5' from there, it's about a 2" crack at it's worst, it's otherwise a healthy maple, about 30 ft tall. I like...
  10. U

    Trying to repair a split tree with bolts(s)

    Trying to repair a split tree bolts(s) I have a tree that split down the middle from high winds, about a 5' long vertical crack. The crack extends from about 2' off the ground, and up 5' from there, it's about a 2" crack at it's worst, it's otherwise a healthy maple, about 30 ft tall. I like...
  11. U

    Radiant heat - have air bubbles - need advice

    Guys, Solve the puzzle, win a prize. I just fired up a closed radiant heat system, with 50/50 antifreeze made for radiant systems. The in-floor Pex and all other associated fittings are leak free. When I first filled the system with oxygenated tap water, then drained out half the water and...
  12. U

    Have Radiant heating - need supplemental heat ?

    Guys, Just finished installing a radiant heating in-floor system (natural gas based), concrete will be poured in a couple of days. It's cold here, but with the radiant heat operational, the pour will occur over heated Pex :thumbup:. My question: do you guys that have radiant heat in your shops...
  13. U

    OSB on walls Sheathing or Underlayment type?

    I'm leaning toward using this OSB: http://www.lowes.com/pd_12218-99899-NA_0__?productId=3602846&Ntt=osb&pl=1&currentURL=%3FNtt%3Dosb&facetInfo= vs this one for the walls of my new pole barn...
  14. U

    Metal Ceiling with Metal-clad Bx wiring

    Going to be installing a 29 gauge metal ceiling (insulated) in my pole barn. I'm installing metal clad cable to each fixture. I'm going to flush mount the T-5 fixtures to the ceiling. Can just drill a hole in the metal panel, push the Metal clad cable through it (no grommet) put a Metal clad...
  15. U

    Pole Barn vs Stick built - which one ?

    Guys, I have quotes for a 30x40x14 pole barn, and the same structure stick built (2x6 studs 16” oc ). All parameters on both structures are identical except for the type of construction. Obviously the concrete work is more formidable with the stick built (footers etc) as opposed to just a pad...
  16. U

    Pole Barn 12' 13' or 14' side walls

    Hi, Almost ready to build a 30'w by 40' d pole barn with 2 10' x 10' doors. Priced out now at 12' at the side walls with "flat" trusses inside i.e. no scissors trusses. Builder will install a flat metal ceiling. I don't plan on any storage above the ceiling, it'll be insulated. For an...
  17. U

    2" XPS foam in floor - how to handle doors

    Will be having a 30'x40' pole barn built. Plan is for 2" XPS foam in the floor for use with radiant heat, with a vapor barrier beneath the foam. As I understand it , the methodology is to afix 2" foam to the "splash board" . The splash board runs around the perimiter of the pole barn. The...
  18. U

    New pole barn - where to install lift

    Gents, This one is tough to do a search on, so I'll ask it here. New build, 30'wide by 40' deep with (2) 10' x 10' entry doors on the 30' side. 36" man-door on the front-right side of structure. Assuming I mentally divide the barn into 4 quadrants: rear-left, rear-right, front-right...
Top Bottom