Search results

I saw these today in Lowes. I had already seen the 3/8" version last year, but the 1/4" and 1/2" are new at least around here. The 1/2" has a pretty big head, but the 1/4" isn't bad. They are selling the 3/8" by itself now, but it is cheaper to buy the set with the crappy universal sockets and...

I found this old Herbrand wrench in some junk we were getting rid of the other day. It was kind of rusty, so I brought it home and cleaned it up. I added the white paint to the lettering to help it stand out. I think I am going to hang it on the garage wall. Not too bad for free. I have since...

I bought a set of long pattern SK Wrench during the HJE SK day and have to say I am very disappointed in the quality. Most of the wrenches 11mm and smaller don't have the open end cut nearly deep enough. I compared them to a normal length SK SAE set I have and also to a metric Proto Challenger...

I spotted these at my local Lowe's today. The saw is assembled in China. The others are assembled in Germany. Has anyone else seen them? Sent from my SM-G900R4 using Tapatalk

I am currently trying to take apart a Weaver WA-73A jack that I bought at an auction. It was going well until I tried to take the end off of the rod. I removed the cotter key, but cannot get the end off the rod. I don't want to damage the rod. Is there a trick to getting this apart?

I am looking for a few shallow Indestro Super 1/2" drive impact sockets to complete a set I bought at an auction. I need 1/2", 9/16", 5/8", 11/16" and 3/4". I don't know if they made a 3/8" or not, but if they did, I would like to find one of those too. I know the chances of finding these may...

The local Ollie's has Milwaukee 7 piece Metric Nutdriver sets for $14.99. The part number is 48-22-2417. The lowest price I could find on Amazon for these is about $33. As always with Ollie's, who knows if your local store will have them. Sent from my SM-G900R4 using Tapatalk

I just bought this jack today at a flea market for $20. It looks like a good old high quality jack, so I couldn't pass it up. The ID plate is long gone, so I have no idea of the make or model. It has a minor leak, so I would love to find a seal kit for it. Any help would be appreciated. Sent...

I ended up with a partial set of nutdrivers from a bucket of tools I bought at an auction. They all say "Milford USA" on the handles. The handles are clear acetate with a strip of color on two sides. A quick search of Google and this forum turned up nothing useful. They don't look like...

These are $28.99 with shipping. Not too bad of a deal on what look to be wrenches in near new condition: http://www.ebay.com/itm/SK-Hand-Tools-SK-383-SuperKrome-3-Piece-6-Point-3-8-INCH-to-11-16-INCH-Flare-Nut-/191350006333?pt=US_Hand_Tools&hash=item2c8d59623d Edit: These are not mine and I...

My local Sears has the 56 pc. Gearwrench ratcheting screwdriver set (44013) on clearance for $16.97. I am not sure what the original price was on this set, but it was on clearance last week for $26.97 at the same store. As always when dealing with Sears, YMMV.

I found the following Blackhawk socket sets on Grainger's website for super cheap: 1/2" drive 12pt 10pc metric deep socket set: $17.63 https://www.grainger.com/product/BLACKHAWK-BY-PROTO-Socket-Set-3XE72 1/2" drive 12pt 10pc metric standard socket set: $11.28...

Does anyone know where I could find a repair kit for the flex portion of a Blackhawk 34935A ratchet? This is the pin and the spring washer that keeps the head from flopping around. I know Snap-On makes them for their ratchets as I have put one in an older ratchet. Google searches have so far...

I have been looking at buying a good 6 point 3/8" drive metric socket set. Why are 12 point sockets seemingly always cheaper for the same set? In some case, it has been as much as $40 or more. Are 12 points just that much cheaper to manufacture or are the 6 point sockets in more demand and...

My local Sears has almost all of their open stock wrenches on clearance for anywhere from 20% to 50% off. This includes the ratcheting wrenches, combination, offset, etc. I even found a 1" full polish stubby for $10. I don't know if they are trying to clear out the US made stuff - no one I...

I am looking for a 10mm five point socket to fit the injector pump on a Ford tractor. I searched the forums and only came up with the buffalo sockets for water meter covers and some for brake work, of which the smallest was 12.5mm. I have also scoured the internet off and on for about 2 days...

SOLD! I have a Proto 18pc 1/2" drive set part number J54120 for sale. It has 12pt sockets from 7/16" to 1 1/4", breaker bar, ratchet and extension. It has never been used. I would like to get $125 shipped or may trade depending on the offer. Sent from my DROID RAZR HD using Tapatalk

The May Advance Auto flyer has the 5 piece Gearwrench non-reversible metric or SAE sets on sale for $14.99 each. They also have the SAE and metric Gearwrench ratcheting flare nut wrenches on sale for $29.99 each. Not too bad if you need any of these sets.

At work, we have several 1" drive 1 5/8" eight point socket marked "White USA" with a part number I6352L. I can't find any information about this socket anywhere on the internet. I am looking for possible warranty information on one of these. Has anyone ever heard of this company?

I recently bought a new Snap On FK80 3/8" drive stubby ratchet at work. This is my first Snap On ratchet of any kind. I must say that after all the hype on here, I am pretty disappointed. It has way more backdrag than any other ratchet I own, including some cheap Benchtop ratchets from KMart...