Search results

that *****. I've had mine for 5 months now. I can promise you throw all those fittings on the post in the garbage can quickly. do yourself a favor and buy 2 1ft 3/8 6000 psi hoses. get 3/8npt male on one side and 1/4npt male on the other. thread the hose directly onto the post. then put the...

Ok if you do that just leave the pump stuff alone. Those fitting don't leak. Partially because they use an fittings on the left side. I would add the 90 on the post side. The 1 ft hose will work great. Anything longer could be tight if your post is close to a wall like mine. Remember you need...

Chuck the 90 is used so the hose exiting the post lay flat instead of pointing up. If you quick connect the pump then the only thing you need to do is take the hose to a hydraulic shop and get them to cut the fitting and put a 1/4 npt male on it so you can screw it directly into each post. You...

i was referring to impact series from CP. i have the same air crown nailer and it is pretty cool.

i know plenty of mechanics. the money is in the side work for them. their main job put food on the table while the side jobs sends their kids to disney world. find a good dealership that you can get on with and build your customer base. i'm 100% loyal to my mechanics and go wherever they go...

i love the step drill bits. perfect cut round wholes. i used it to cut my maxjax. you go buy that at homedepot and see how much one of those cost. the other good thing are adapters for hand tools. Breaker bars, torque wrenches, etc. we calilbrate my torque bar at my buddy's lab and it was...

http://www.harborfreight.com/18-in-7-drawer-glossy-red-end-cabinet-for-roller-tool-chest-68785.html all i had to do was dremel .5 on an inch of one corner and it fits fine. becareful when you try to roll it round because is very heavy on one side. I thought about adding a second one but...

my favorite thing from hf is the wrenches since they have 72 teeth. i use the 3/8 with 1/4 extension one a lot. probably my favorite one since i can get more torque when i need it. i have the side box added to the red roll around. pretty much perfect for all the things i use it for. i also...

those anchors are being discontinue from wej-it... stock up if you need them. honestly i torqued my epoxy anchors down and have never removed them after torque... kind of scared to since i finally got the thing torqued and leveled...

weird never happened again and this time i had both arms on there. i'm guessing the side that was heavier was able to push the fluid back through the proportion valve vs the lighter side.

CHuck, Takes those FN fittings and toss them in the garbage. Absolute PITA to deal with. You are going to want to figure out where you are going to position the pump. Once you know where then go buy your custom lines. I could have saved some money if got rid of those fittings from day one...

so i installed my new lines yesterday. one side i had the arms still connected. other side i had the arms removed. i raised it to about 24 inches and left it over night. i wanted to test for leaks and didn't see any. when i came out this morning, the side that had the arms were on the...

after having it for 4 months i figured out a couple of things i would have done differently during the installation. go buy epoxy anchors. they are expensive but 100x simple to use. buy 2 tubes to concrete epoxy. The drill bits for sps max is god awful expensive. Between the anchors and...

got my 1 ft lines. if anyone wants to get it done, i went with 3500 psi aeroquip. then one side is 3/8npt and the other side is 1/2npt. that way i now have no fittings until i hit the quick connect. makes the install so much cleaner. you can also take this time to get the 90 degree elbow put in...

got my 1 ft lines. if anyone wants to get it done, i went with 3500 psi aeroquip. then one side is 3/8npt and the other side is 1/2npt. that way i now have no fittings until i hit the quick connect. makes the install so much cleaner. you can also take this time to get the 90 degree elbow put in...

got my 1 ft lines. if anyone wants to get it done, i went with 3500 psi aeroquip. then one side is 3/8npt and the other side is 1/2npt. that way i now have no fittings until i hit the quick connect. makes the install so much cleaner. you can also take this time to get the 90 degree elbow...

i was thinking about this the other day. instead of using all those fittings, is there a reason why not to replace all those fittings with a 1 ft hose and use a 3/8 to 1/4 npt? one side would have the npt and the other side would have the male quick connect. That way tightening the line won't...

i took two 12 inch paint rollers and slit them down the middle. then i slid them over the silver pins. that way when i open my door on my 997 it doesn't hit and scratch the car. :) i also added 4 feet of hoses to the left arm so i could route the hoses nice and clean.

my one side leaks a tad. my other side leaks a little more. i put a white paper towel and i see it is turning pink. this is with nothing on the lift. i'm cleaned and re-tighten on side with no luck. going to buy some fittings tomorrow. i like the quick connect that came stock and will...

guys i figured out what to use to prevent door dings. go buy a 12 inch roller paint brush. make a slice down the center with a dremel. now fit it over the silver safety hooks. you're done no more door dings. all this time i thought it was going to be the post that my porsche hits. it's the...