Search results

Sewer line 14 feet deep????

Wedge 1 big door 12 feet wide 11 feet high ,one normal man door. I was thinking 1200 feet 1/2 pex 4 port manifold. Still trying to figure out a layout on paper. Can't seem to get one from the net. Any help?? thanks Larry

James put your glasses on old guy lol Larry

Got a price quote from Radilant in Vt. inside mearsure 31 x 39 feet. Pole barn.They want me to use 7/8 xl pex,4 loop at 250 feet per loop. I told them i just wanted the pex tuping and a manifold, I was thinking 4 runs of 1/2 in. 300 feet long.I also asked for a lay out that did not happen...

The 2 nail deal or one nail and a peice of wire together in the hole. Larry

Thinking about doing this in my new garage.Anybody done this??

option A they measure they make they instal good luck. Larry

G-Ram thats good to know, thanks. Pex supply says on there site they do not ship to Canada. Thanks guys Larry

Plumbing supply don't seem to want to sell to the puplic. This is in Ontario Canada. Larry

Looking for a dealer that sells pex tubing and manifolds etc,in Canada. Thanks Larry

Concrete block probably cheaper, you still need a footing. Depends where you are. How deep will the frost level be? Larry

Okay,8 in block foundation 2x4 walls 3/8 or 1/2 inch obs on out side Some type off rap on the obs leaves you about 4 inches for the brick. 2x6 walls and you will need 10 inch block.I would not recomend split face block ,they will let water penatrate them. Larry

I have repaired that type of brick before.Takes a lot of time . You need to find a brick similar in colour,all of the mortar joints that are cracked or open need to be cut back .Cut out the bad brick,, big grinder with a masonry blade and the loose mortar joints.The mortar is very likley LIME...

Get a block layer to help you,Get him to build the corners and bring his mortar mixer, you get sand and cement. He will tell you what kind. After the corners are up he can leave you to play with it. I did this job for 40 years and have seen some real bad looking jobs, Good luck. Larry

okay then, thanks guys.I do plan on putting in another vent that should open when the exhaust fan comes on. I will wire it with a seperate switch. I have used this setup before in a horse barn but that was to get rid of all the moisture in the air. Thanks Larry

I am planning my new 32x40 pole barn garage.I am thinking i should put an exhaust fan in now,better now than trying to cut it in latter.Floor heat and walls and ceiling all insulated. Fan would be to get out welding smoke and car exhaust. 12 foot ceiling any advice here? I know car would not be...

I am wondering how big a floor will this set up heat?

Bill, thanks,, north and east of you, 1 hour east of Toronto Larry

Hello all just joined here, have been on the HAMB for awhile though. I am planning a new garage this summer 32x40 pole building. I plan on putting Pex in the concrete when the floor is poured. Lots of good ideas here from people who have done this. I winter in Ga. and live in Ont. Canada the...