Search results

Craigslist dude, look for a nice 80 gallon two stage for cheap

Definitely the check valve, I had the same problem. If its bad it will also make the compressor difficult to start if the pump is getting back pressure from the start

I think im gonna take a chance and buy one to have as a backup saw.

Has anyone bought one of those chinese chainsaws off of ebay and had a good experience with them. They look pretty good and im thinking of buying one. They are very reasonably priced (about $180). I was looking at two. one is a 62cc/20in bar and the other is a 52cc/22in bar. One goes by the name...

I moved my 80 gal with an engine hoist and had the wheels get hung up and the whole thing tipped over and almost fell on me. landed on the mag starter so had to buy a new one of them, got lucky it didnt land on the pump or motor, and that was with two of us. Do yourself a favor, dont use an...

Ill try that, thats something i havent tried so thanks. Ill let you know tomorrow if it works Sent from my iPhone using Tapatalk

I got a master torpedo heater 100,000btu. It lights up at first and stays running for a little but and then the flame just goes out and it fills the garage with smoke. I checked the pressue with a gauge and its right on the dot at 4psi, and thats what it says in the specs on the side of it. I...

Buy me $190 worth ofwrenches and spare $10 for shipping. Thanks Sent from my iPhone using Tapatalk

An autopsy table from a hospital makes a great ****** teardown table. It has a drain for the oil to go into a bucket. Sent from my iPhone using Tapatalk

that pump looks like it belongs on like a 30 gallon tank thats probably why it takes so long to pump up, you may want to look into a larger pump.

I tried looking at the trouble shooting on that website but had no more luck. Today I fired it up and it worked fine for about an hour and then I shut it off. When I went to turn it on again, it did it again and shut off on me rather quickley and the garage filled up with smoke. Is there a way...

I have a master 100,000 btu kerosene torpedo heater. I turn it on and it works fine, takes a few moments to start up if it hasnt been used in a day, and it works fine for about 2 minutes, the cone gets red and all. But then after about 2 minutes the cone turns from red back to cold and another...

run it with no oil, that will really speed up your break in

are you talking about the saftey pop off valve or the tank drain? If its the saftey valve, then just get a higher psi one.

I like ddawg's idea of the poly resin. Maybe i will just buy some gravel, compact it, and then poly resin over it. I'll take a picture of the car port tomorrow, it think I was very resourceful. I may just scrap the glass idea. What can I expect to pay to cover a 17' x 25' floor with like 2-3...

A good scrapper will not share the location of his honey hole

I dont want to have to roll down stuff every time, just wet it down before a paint project. And also, i dont want to spend any money. So far on the whole car port i've totaled $220. Mostly reclaimed materials I scrounged up. ai thought about spending money on gravel but if I can get glass for...

dont buy it, **** heap

im sure there is a seal in there. That cork is probably an old style of seal, they sell newer rubber revisions of those now, there should be a number on the seal. Maybe a closer picture.

I'm building a paint booth/ carport and need a floor other than the dirt surface that is beneath it right now. I don't want to spend any money if possible, so I thought of collecting a sh*t ton of glass recyclables and breaking them up to use on the floor. I figure I could hose it off every time...