Search results

It is a 17" aluminum rim, had been running fine for 2 years, just started leaking recently (last 3 weeks). I will go over it again and dunk in water for good measure, all 4 tires were done at the shop as the same time. I wish I had a tire machine at home, every trip to the tire store is at 30...

One of my tires developed a slow leak, it would go from 35psi to 20psi in a week. I took the tire off and carefully inspected all the treads, both side walls, nothing. Any ideas? The tires are barely 2 years old, don't remember if the tire ship put in new valve stems or not.

Most passenger tires have max psi of 50, usually for on road applications 32 cold is fine. It really depends on the weight of car, profile of tire (aspect ratio) and whether you're off-roading.

That thread basically said HF jacks are not good. Too late here. Thanks for the advise, I don't even know what the pressure relief valve is, I'm guessing once I disassemble it'll be obvious. For the record, the jack is not leaking fluids. I will inspect the mechanical welds this weekend...

I use the HF Pittsburgh jack (1.5 ton model) for quick around the car stuff. Yesterday, while jacking up the left front wheel of my car, the jack initially had a click sound, a couple pumps later, it gave a loud clunk/pop (this is before the tire lifted off the ground). Initially I thought the...

Does zoro have good tile saw? I need to get ready for a bathroom reno. i already did a 25% and a 30% earlier this summer, grasping for things to put in cart tonight!

In...

Is that drywall or plaster?

It is IR 326, to be clear, it is the pin that holds the spring trigger. Because the pin is bent, when flipping the trigger, it sometimes does not clear the cut out and can't rotate to activate the trigger. Is this pin serviceable, it appears to be pressed in.

I recently got an IR air cut off tool, the spring trigger pin is bent out of the box. This makes flipping the trigger a trying affair, depending on the orientation of the bend in the pin. Now the tool is fine, except this issue. Is it easy to pull the pin and straighten or replace? I really...

With so many impressive builds, sometimes I feel like the only guy without a 30x50x12 playroom.

Re: ***** Makita Addiction Thread ***** Haha, to make up for my indiscretion, here is my other Makita drawer.

It's the one with tape and crimp tool, here. http://www.zoro.com/knipex-linemans-pliers-9-14-in-erg-handle-09-12-240/i/G6095022/

Re: ***** Makita Addiction Thread ***** My Makita drawer, absolutely love these tools.

No Miller for me, but think I got enough pliers.. for now (last 2 I already own). Their paper catalogue is so much easier to use.

At least I got the email this time. Good job Zoro, 25% here we come!

I'm looking to add a couple of air nailers for work around the house. What finish nailer and frame nailer do you recommend? I heard some nailers only work with their own brand of nails, is that true? I see a lot of Bostich in HD and all Hitachi in Lowes, which will you choose, any other brand...

What's the difference between a cobra and pliers wrench? I'm looking at the 10" versions, I really like my needle nose and diagnoal cutter bought elsewhere, been waiting to add the pliers.

I don't have any Snap On tools b/c I've heard they're very expensive. Just curious how much can you get for $1000 in Snappy hand tools?

Looks to be a good size build. How deep is the footer below grade? How high is the ceiling going to be?