Search results

40x30 scissor truss's 2 pitch inside , 5 pitch roof , 13ft walls with one 12ft wide garage door and one man door. 2 inches in walls and 3 on the roof, $7800 in NJ for closed cell

We only use Ward pipe fittings at work. We got burned after we had to go back to aprox 40 gas stations and redo the piping under the pumps. We now only use fittings made in the USA

Quincey is the quietist compressor I've been around. Champion is not bad.

https://www.mcmaster.com/catalog/125/3969 This is what I used on my Pole barn.

I would test with mineral spirts. Flow ratings with a register on it , maybe 15gpm using a non automatic nozzle.

I need to buy a window unit. I see LG makes getting a dual inverter 22000 btu unit. I can get one for $606 with free shipping. Is it worth buying one of these vs a std window unit?

Been a slow process , but here are a few more pictures. I'm almost finished. WAY WAY over what I thought I was going to spend , but I'm only doing this once.

I need to buy a tig welder for aluminum 1/2 inch max thickness and only on occasion . I'm interested in buying a Everlast 250 or 255 and looking for opinions . I'm a rookie tig welder.

I've got a new 30x40x13 ft celing pole building with closed cell foam, 3inches in ceiling, 2 in walls. While waiting for my radiant heat to get hooked up, I had to do something. I bought a 20k electric heater. I keep it 50 to 54 with a max of 60 if working inside. My December electric...

DO NOT use FF on a GM frame, it will melt away the frame coating. Anything that is painted ,it's fine. Traded my 2011 gmc in and dealer called , the service manager asked me, what did you use on your truck, its the cleanest 2011 we've ever seen that's 8 years old.

I agree 100%! I just put up a 30x40 with 13 ft tall ceiling height and I spray foamed the whole building. I'm waiting on the radiant heat to get hooked up and I put in a 22000 btu electric heater. The heater can keep it 60 inside, but I keep it around 53 when not inside . My electric bill...

I'm in north west NJ and built a 30x40x13 ft tall walls this year. I had it spray foamed (3" roof,2" walls, closed cell) I am waiting for the radiant heat boiler to be installed and didn't want to freeze so I bought a 20k btu 240 volt heater. My ceiling is wide open up to the ridge which...

Their is an air space . Foam isn't touching the metal anywhere. My sofits and ridge vent still work.

Well, I just built up in Sussex and we got 10 inches in one storm. My 30x40 has a 5 pitch roof with no snow guards. Once the snow slid off , my gutters are not looking good. My building was just completed in Sept ! I was told I didnt need guards. I've got a ton of money in my new...

I built a 30x40 with 13ft ceiling height. The truss's are open up to the peak with is 19ft. I had the building spray foamed, 3'' in ceiling and 2 in walls. I'm waiting on the guy to hook my radiant heat up. I bought a 21k BTU electric heater and it will heat the place to 60 no problem...

I'm in North West NJ and I did 3 inches in the roof and 2 inches on the walls. I said to the spray foam guy, is that all I need and he said yes. I asked him if this was his garage would he do it thicker and he said no. My final question was, will you do it thicker if I want and he said you...

Quincy is the best if you buy the better line of compressors and they are very quiet. Champion is also very good and again the better line is what I would get if your using it a lot.

Go over to the flooring section, I did a review on the product I used. I did etch the floor before I cleared it.

Clear coated my 30x40 floor 3 days ago and would like to say a few things about the process. I figured it would take me and my son a few hours and it only took an hour and twenty minutes start to finish. I wound up only using 2.5 gallons and after the first section I said we gotta try and...

I'm on Mudtown Rd Cleared coated the floor with Armorpoxy SPGX. One coat and it was very easy. Me and my son did it in one hour fifteen minutes, 30x40.