Search results

No one uses sprayers??

I am looking for a sturdy, dependable sprayer for my shop. Something that will handle latex as well as oil base fluids. What is out there that is highly regarded by the users? Thanks

The valve and handle have a guard surrounding them so that a wrench does to go to the valve base easily. Do you just use a grinder to cut this off?

I will get into today and look closer

Just a good spray into the airbox?

I have a downdraft forced air furnace. attached to the bottom I have installed a Scuttle humidifier. it has been running for a few years I think I am seeing mold in the furnace air box. How can I mtigate this?

I am not home to actually look at the box / breaker.. I am working remotely, just reviewing the list of what needs looking at when I get home

I am sure that it is a 15 amp circuit, not sure of breaker amperage. Not a split circuit. I am not able to look at box now but believe there are 2 gfci breakers. They cover the 2 bathrooms and exterior receptacles. If I put in a gfci and there is a gfci breaker is that create problems for...

Just at the breaker I believe

I have a duplex receptacle on my kitchen counter, approx. 24" from the sink. It no longer will hold plugs securely when they are plugged into it. I guess it is wore out. The house is a little over 35 years old. Do I need to replace it with a GFCI? Any wiring challenges except getting the...

I called Jet technical service and was provided the owners manual and spec sheet for this thing. Big shout out to Jet folks. Thank you

To the top

I recently picked up an Orbit drill press, mod OR-2051F. It has some damage and I believe can be fixed and work fine. I believe that Orbit is the precursor to Jet Tools. Is there an outlet for the owners manuals and parts list for these? Thanks

I have a locking laminate product on my floor. There is a low clearance bench sitting above a forced air heat register, keeping most of this hot air under the bench. The laminate has bowed up under here. It is bowing as a unit, does not appears to be separating from itself. I placed a couple...

Beautiful tanks. Why no baffles?

You don't say where you live but a heated slab is the only way to heat. If you do some of the work yourself it isn't that tough.

Try a machinist at a machine shop

I have 16' ceilings in my shop. A 32' X 22" open bay. 2 rows of 3 fixtures with the Feit 2 bulb, LED fixtures hanging 6" or 8" on chains. No problems with them at all. Also, I have mounted them as task lighting over the work area for more definitive lighting at the work area. Expecting...

All good info. I just need to get home and tackle it. I hate to hope for rain so I don't go fishing. But.....

I think it is about 15 or so years old