Search results

Anybody using these pictured ridge vents? How about installing after you've been in your building for awhile? Notice any differences? Thinking of installing a couple as all I have are rollup doors and windows. Lot of heat trapped up in the peak.

I'm looking at getting one of these auto drain inline filters: https://www.amazon.com/dp/B005JDL5RU/?tag=atomicindus08-20 I can't seem to find any info on how the auto draining function works. Does it drain once it gets to a certain level no matter what the pressure is? Or, does it only...

Redlunn, Great setup! Did you move your tank check valve? From the way I see my system, the check valve will have to be removed from the top of the tank and installed in series on the line from the pump to aftercooler. Is that how you did it?

Huh? What are you referring to?

The air will go into the tank after the dryer and yes I'll be removing the original line from heads to tank. So is the check valve in the unloader valve?

I do get a some water in my lines cause I run it hard sometimes with the blasting pot, but I have no cooling besides the tank. I have 2 separators in series that catch most of the water, but the air is still hot and condensing. I use point of use dessicant for my powder coating and plasma. My...

Yeah but 115 is just plain hot! I had seen that setup and will incorporate some of those ideas. That was my initial thought of keeping all the lines inside for protection.

The tank is outside on a concrete pad. Didn't think of a check valve. I could install one at the outlet of unloader valve. Got a good source for them?

So I've done a bunch of research here on setting up my airlines in my shop. I I have a 80 gallon CH compressor and just bought a used air dryer. Here's my idea of setting it all up. The compressor is setting outside enclosed in sheet metal with the top and bottom screened for ventilation (I'm...

Anybody have experience with these refrigerated air dryers? I can get one pretty cheap that flows 40 cfm. Can they be mounted outside? Best way to get inlet air temp below required 180 degrees? I see guys here use automotive coolers out of the heads. Best?

I have not, but I will tonight. Thanks.

I have a Hypertherm 600 that I'm having problems with. I'll be cutting and all of sudden the arc gets real weak and stops cutting. Even on sheet metal it'll just leave a little "trench" in the metal. There's still an arc, just not strong. I've changed out consumables-twice- and it still is...

Anybody use Cerakote's gloss clear over polished aluminum to prevent dulling? I've used their black on a couple guns and it's tough stuff.

I guess no one has dealt with this.......

Working on a project flip house that has an outdoor front porch, approximately 15' x 15'. Previous owners put down ceramic tile and then added some more porch square footage. So, I have tile and bare concrete mixed. Both are finished at the same level, so no step or ledge. We want to make it...

Just made mine last weekend out of huge piece of butcher block about 13' long. Made the braces out a 4x4 tube and powder coated myself. Still need to sand and treat. Thinking of routering a piece of 1/4" plate steel into the surface for hammering items so I don't booger the wood.

They had me until the last sentence of the product description, "Please ensure the adapters are connected on the same circuit". If their definition of a circuit is one that's on a circuit breaker in your main box, I can't do that with my configuration and I don't see how many could. How many...

Tell me more about Homeplug please!

What kind of distance between cameras and router?

May have to try that. It's not a direct line of sight with some shrubbery in between. Won't a wireless signal go through shrubbery?