Search results

I have my 10ga wire to ceiling with enough extra to come to middle of post on lift and either a disconnect box or make a plug on end of pump wire and plug end on supply 10 ga wire. Going to use junction box at ceiling and run it in enclosed grey stuff or the flexible tubing from junction box to...

Thanks for all the great feed back!! here is a link to press https://www.northerntool.com/images/product/2000x2000/145/1459100_2000x2000.jpg press weighs 430lbs was thinking that safety margin with added items would be working load 900-1000 and can't find any 2 inch wheels in that range that...

I am setting up my shop and want to have everything able to be mobile, band saw, table saw, drill press and parts cleaner. So I purchased some 5 inch casters for my forty ton Press. It will be used for normal automotive hobbyist type car related and the occasional straightening of an anchor...

Love to have a set

thank you

Severe Weather 3/4-in Common Square Southern Yellow Pine Plywood Sheathing , Application As 4 x 8 Pressure treat, here on the coast we refer to it as salt treat for the salt air resistance

I have a 4 ft piece of salt that that goes from the concrete floor to where drywall starts. My question is what type of caulk can i use that will adhere to concrete and the salt treat and will be water proof. The reason is to keep water out of insulation in wall ( i did use foam board for first...

Thanks for all the great responses. My biggest problem is I am down to 5k left after my build and just want to make sure I spend wisely I.E. don't come to regret not waiting and saving more to do it right first time. Problem is right can be up front or future cost(efficiency vs. install cost)...

Thank you that helps a lot. I did nothing to clairify if it was a mini split or a traditional heat pump unit his way of difrerentanting was by saying we would run one large duct down middle of downstairs that would get smaller at far end with vents on each side . In my ignorance and lack of...

The building is 36Wx 40D ceiling is 12ft. Have an upstairs room 32x16w 8ft but side slope to 6ft at walls( due to truss) This room has r 30 under floor walls and r38 ceiling Down stairs has r19 walls and r 30 part of ceiling under room and blown in r 38 apx 10ft on either side of room which is...

Well am finishing up my shop 36x40 with a second floor and thought I would have plenty of space for everything. WRONG My question as I start to lay everything out is putting the compressor outside. I live in Delaware and freezing temps are around for about three months of the year. I was gonna...

Thank You very much!! All your time and effort and posting about layouts and light choices are very much appreciated and made it very easy for me to make the leap of faith to the LED band wagon and get a head start on lighting my shop .

Re: Light Fixture Layout Collections frosted or clear I hope this is the right place for this question. I am just completing my pole barn 36x40 12ft ceiling. 2 windows in each wall and side door in one wall, a 9ft x 10 side gets a lift and 14 ft x 10 high foot doors and entrance door in front...

thanks for the information and replies gentlemen i appreciate it I will keep looking, leaning towards doing the James stuff led ready fixture and driver bulbs.

I have been reading thru the great info on here but have a question as I am getting close to pulling the trigger on my lighting for my 36x40 12ft ceiling. I have come across some fixtures 15 of them for 25 this is description USED(With Lamps) Genlyte 277 Volt T-8 lamps 2x4 60 cycle AC I am...