Search results

You can get Remedy on line but they all use the same chemicals. I simply don't believe the corrupt WHO, they ones that said Roundup was bad.

I picked mine up at a freight forwarder where they loaded it with a fork lift. At home, I unpacked it and carried it piece by piece into the shop where I put it together.

Chico (Lake Bridgeport), Texas

I used a water based solution for a year and my filter, wash tube and tank is rusted very bad. I'm going to get rid of it it's so bad.

I have two systems; one is a AV amp with Bose speakers and the other is a former computer sound system with a sub-woofer. I also have Dish satellite system with Sirius/XM radio channels. Bothe systems have sub-woofers and satellite speakers around the 1,500 sq ft shop. The best sound is from the...

When I was in the US Air Force we had a 4,000 sq ft shop and it was swept, stripped, mopped and waxed every week. Fast forward 22 years and my 1,500 sq ft shop is swept and mopped every week. About once a year I get my large floor buffer out, put a scrub pad on and get rid of all my over spray...

Yes it was.

It's been 3 months now and I thought I would update costs. It was going to be very cold for a few days in early Feb so I turned the temp to 62 degrees, the lowest it will go for heat. Temp got to 62 and held for three days. Used it for about 4 days more that month. Electric for the month was...

Advantage customer service is great. I bought min about 5 years ago now and I developed a leak under the reservoir every time I used it. I didn't lean during the lift, only after pressure as off. Called Advantage and they discussed it with me, I pulled the reservoir and checked the torque on the...

I have an intercom between my metal shop building and the house. They are about 20 feet away at the closest point. The Wife can page me when I'm working or I can page her if I need something. It's worked great for about five years now. Bought it off amazon for around $30.

Get the type that pull up after you position the press. Then the press sets on solid legs.

I recently added an connection outside my shop for some metal restoration welding I'm starting on and was very surprised how coiled the line was, it made it very hard to get a seal with the push in fittings. It appears to have a memory as it recoils as soon as I let it go. Tried heating it with...

Yes, just like that. It was 35 deg but after DF ran just fine even though there was still some on the fins.

Well I was going to take pictures but it went so smoothly I was done before I got the camera. Arrived in perfect condition, packaging was the best I've seen. It took more time to put in a separate circuit for the unit than it did to hang the head unit. Installed in a steel building but no...

After reading all the posts on this forum and other reviews, I ordered my 24K system today. I'll take some photos of the install and do a review afterwards. Thanks to all for the info.

No regulator after tank, good idea we will put in place. I have a digital pressure gage from Eastwood I can check and compare with my home compressor which works fine. Since we just use it for filling tires and a few air tools. Thanks for everyone's help.

Our local Volunteer Fire Department has a 135 PSI, single stage compressor that has been here for years. Our Engine and Tanker require 120 psi in the tires but the most we can get in the tires is 98 psi. Gage at the compressor reads 135 psi but tire fill gets real slow and will not fill above...

I've been using my Advantage lift about five years now and the hose is not an issue.

Don't try and use the casters with a car on it, the casters can't handle even a move a an inch or two. Without a car, they work great.

Let us know how it did.