Search results

I have a couple pieces of equipment and they have lexan windows that have been scratched and faded to the point you can't see through them. I would like to replace them myself, but not sure if I should try laminated glass or stick with lexan? The local glass guy wants almost $2000 to replace...

I saw a bit of discussion on this jack in another thread, I was hoping to get current opinions. My dealer is getting 130 of them and will offer trade in on any jack towards the $499.95 price. Are they worth it or what? I was leaning towards the Milwaukee 4 ton jack, but I thought this may be...

I have a bunch of hole saws and I was thinking of making a display board to store them anyone have any other ideas? I have up to 4.5", right now they are just floating around a drawer, some have cases, but I think the case is only nice if you are taking them with you.

I am looking for some 2" OD with 1/2" wall, not even sure if it is made, but I was asked to find some. I need a 20' long piece. Anyone have any sources? My supplier said that he found schedule 120, but could not find anything thicker. That was confusing, since apparently pipe is measured...

I am installing two fans and I was wondering if I can use one switch? The fan has four speeds and most switches only have three, but the switch that comes with the fans is only 1.25 Amp max. Fan seems to draw 0.97 amps on high speed. I have been looking local at home depot and lowes, kind of...

Looks like there is no such thing as a fine thread hand knob unless outside the US. What size should I get to rethread? Anyone have a good source? I can find M10 x 1.5 but not 1.0???? I was thinking of buying a large size and running a die over it to make it what I want for threads, it...

I have 12'6" walls and I just bought a 28k BTU AC unit that will be mounted through the wall. Yes it is designed for this purpose. Would you mount it higher or lower? It was a wireless remote so I can control it without having to reach it.

I would love to have a well, but I can't justify the price they want to install one. I have a 325 gallon tote and I thought I had a shallow well pump (apparently it is dead), and I have a couple pressure tanks. My goal is to make a fairly compact movable unit that will allow me to have a tank...

What do these letters mean? SHTH? HDTH?

Big Quincy QR 25 series air compressor model FF 350 Last April (2014) I did a little horse trading and ended up with what seems to be nice Quincy compressor. It is currently apart (previous owner took it apart for storage reasons) and I am trying to figure out how it goes back together. Some of...

Any way to add that to the forum? I know I can click on "find all posts", but the way tapatalk has it setup would be sweet for when I am on the computer. I enjoy reading on my phone, but not posting.

My Fluke 88 is close to 20 years old and I really wanted a clamp meter to do some troubleshooting. I am not 100% sure it can even use one with the older meter, but it seems like it should be able to. I have seen add on clamp meters for about $140. I have also looked at the Fluke 381 because...

I just installed a 16" truck tire (load range E) and I did not have the proper tools, it was a pain in the ***. What do you guys recommend? I also have up to 22.5 tires on a few of my trucks. Things that I can see I need for sure: Soap with a brush (I used dawn and my fingers) Tire spoons...

I am thinking that I need some transfer punches, looking for a decent set. What do you guys use? They will not be used all the time, so I don't need the best, but I would like the best bang for the buck. I think I will probably need metric and SAE ¼" up to maybe 1" Similar sizes for metric.

I am looking at a two models, the associated ones have a very hefty price tag but I have not heard much about the other brand. Thought you guys would be able to chime in about these or others. I have a military truck that is 24 volt and I will most likely end up with more in the future, so 24...

Just the reel, not the hose or fittings. I would be using the proper line and quick connect designed for the these gasses. I was wondering about this, I would like to use one for my welders. It seems like it would work, but I had not seen it done before.

I am about to start working on building my all ready custom truck into a gooseneck and fifth wheel hauler. I have admired Nastyzen's topkick build and I would like to say mine will be that nice, but unfortunately I do not posses the skills that he has. :sad: I will be building the body out of...

Just pulled the trigger on a Snap On 84" Epiq. The damn thing doesn't even have a part number yet! Custom color and custom drawer layout, now I have to wait eight weeks for delivery. I don't know how I am going to manage. So here are the details: Triple bank (no power bank) UPDATE: 26...

I have a snap on KRL1023 and I am toying with the idea of trading it in for two smaller boxes or maybe even three carts. What say yee? I am staying within the snap on family, so you can post other brands all you want, but I am not interested. This is in my own private shop, no employees. I...

I am looking at purchasing some surplus equipment and they are offering an RN 381 Bal Tec Bracker Riveter. I have no idea if it is useful or worth anything. I saw some videos and went on ebay, I a not sure if there is a lot of value. Thought it could be an interesting addition to my shop, I...