Search results

im asking because i dont know. Why 6x6 and not 4x6 for the support posts ? my basis for that is the deck currently on the house is 4x6 posts. I think im going to dig a couple holes to get a better idea of whats going on next to the wall and with the existing support post footings. Will report...

I have a bunch of other work to do. The deck is 400sqft and im doing more than the stairs. I also have to replace the sliders that are on the deck. We got nailed for doing a water heater without a permit after the town jacked the street water pressure and caused the blow off valve on the WH to...

Hi Guys, I need to replace the stairs on my deck as the stringers are rotted/splitting where the screws were driven in to hold the treads. The stairs are also on the inside middle of my deck, not along the permimeter and it really divides the deck. It also doesnt allow us to open the window...

In process of building a 12x16 shed. Building out of mostly rough cut hemlock and pine boards. I ended up using 1x12 rough cut for the flooring/planks. 2x6 pressure treated floor joists. I put a 4mil plastic sheet as a vapor barrier under the flooring since the rough cut wasnt perfect and there...

The dog ate the pieces to the puzzle, the 2 year old freaked out. Dada to the rescue. She hasn't touched this thing in over a year.....

You can usually find stainless tables with sinks on one side and top area that can drain into the sink on Craigslist for -$200. Used resraunt equipment. Might be worth looking at.

I use protolabs and Xometry at work also. They are "fast" but not that fast. Usually 3 days turn around AFTER they accept/acknowledge your PO, which can be a additional day or two. They are expensive, at least for the 3d printing but you pay that for not having to deal with the hassle of...

Had my extruder cable break 24hrs into this Print. Not sure what happened.

OCD got the best of me. Reprinted the 3 spot switch. I dint have multi color printer. Only single extruder. I tell it to pause at certain layer height and swap the filament. Not ideal but it works. Also ironing didn't make difference in top layer finish.

Finally got my first one installed with some new white switches

Well can't have success without failure with this sort of hobby. The question is do I just use it, or re print it.

Two color print. Pause it at certain layer and swap filaments. I only have a single extruder. I've done it a few times on things like this. Works OK.

New project for the garage..... Label light switches. Not crazy on the top layer surface finish but it serves its purpose. Have a few more to do and have a few things to tweak for the top layer.

I have the microswiss direct drive units on both of mine so no bowden tube for me. It is kind of expensive but came wuh the all metal hot end and metal extruder.

Familiarize yourself with the firmware and get a good interface to it to be able to flash it and calibrate steppers and extruder. I have a ever 5 pro that worked great out of the box. The Ender 5 plus took some work from firmware updates ablnd alot of tweaking to get to run right. Also the...

I print mostly petg on my ender 5's. I like overature Petg filament. I've also used hatchbox More complex prints still get the fine angel hair strings you mentioned but I really dont get any strings anymore. I also have direct drives which made a big difference. Just made these handles for my...

Level the bed abs set the nozzle off the bed correctly. What slicer are you using? Try cura and use the predefined settings for your printer and material. Constantly changing settings is a losing situation. You'll be chasing bad prints forever. 1 thing at a time.

You could have a new one 3d printed and then paint/tape the colors as desired. Pm me if interested

Large print on ender 5 plus completed after 28 hours