Search results

How in the blank do you get them apart? these came assembled in a box Hole in cabinet is punched but they need to be taken apart to install. The chrome bezel is what comes off the body to insert thru hole in outside of cabinet. SchneiderElectric is the parent company of SqD,these are made in...

It started out so harmless. Drill press light didnt work since I got it. Took a pic of the socket and looks like the contact tab is missing. I probed it with my non contact pen and it says its getting juice when switch is on. So next step was to remove the socket and repair. 2 bolts that hold...

Im currently using the cheapy HF ones but they aren't so bright I would like to find one about the same size but brighter. Bonus if its rechargeable

Ive always been a ******** guy using the palm,just as Dad showed me.(he was a military aircraft mechanic ) Many years ago I bought one of those cone type packers,but never found it very useful. Enter the new ones. I bought this Lisle thats made in USA and of what seems like good quality. I used...

have several bearings in a transmission case to remove got this one from Amazon on a guess. I first noticed that the smallest one was used and fingers bent. turns out I needed that size for one of the bearings and because it was already injured it failed miserably so was able to coax the next...

Ive misplaced the fiberglas backing plate and the nut that holds disc. Any idea where I can get this? Website for Rodac isnt much help.

Ive got a gear that I need to bore out approximately 3mm,from 22mm to 28 mm diameter. Finish doesnt need to be super smooth as it will get a press fit sleeve,however it must be concentric and centered. What will work? Waterjet,laser,edm?I have no idea of the hardness.

One that will stand on its own would be nice. Lots of cheap ones out there something middle of the road is OK. I looked at the Bernzomatic 2200 made in USA,reviews are so so.

need to replace a wooden 16x7 looking at the fiberglas faux wood. Wayne Dalton says its 34wks out any other suggestions?

got one of these and am thinking theres got to be a better one I have 2 drill presses,13,15 inch. https://yostvises.com/products/dc-11-11-drill-press-vise-clamp

hex die for 1 inch bolt is 1-13/16 inch . I dont see any hex die holders that large,only set up for round ones. I only need to thread 2 bolts so dont want to spend a fortune on a holder.

grinder is wearing out fast Pin that centers the auger at the grinder end is very small and material is soft compared to the stainless steel discs it rides on. My first thought was to find a new one,enlarge the hole in the discs and make a bushing that would be replaceable and sacrificial. I...

50 yrs ago Dad gave me a pair,that have since been broken and lost. Would like to find another like them. They were finished in a grey phosphate,had knurled handles show us what you ve got and perhaps I can match them up with what I had.

has anyone tried restoring yellowed plastics with hydrogen peroxide and sunlight? I see some commercial products that claim to do this,one being hair coloring creme. Another is a product called retrobrite thats pretty spendy. Theres also the home brew with hydrogen peroxide and oxi clean. I...

I love this little tool I knew the minute I pulled the trigger using my new 24v impact driver that it was a bad idea. This has done everything Ive asked of it with my 20v stuff,so I guess I need to upgrade. I like the size and footprint of the angle,so dont want anything thats bulkier,just a...

let me first say for the last 40 yrs Ive been an OSPHO guy.Went to Home Depot and couldnt find it. My next choice was something I had heard about Krud Kutter Must for Rust. They didnt have that so got the Rustoleum spray gel(same parent company as the Krud Kutter). Instructions say to keep it...

Bought some new Dimmable LEDs at costco the 6 pack of B30s and the replacement type with trim that the pigtail screws into the standard medium base. First attempt was the B30s (2 on this circuit). Worked fine,full brightness,dimmed down,shut off. I ran them about 30 minutes and came back to one...

Ive had the backpack kind,the siphon feed that you put in the bucket of sand,and an 80# pressure pot one. I need a small one thats very portable for little jobs away from shop.I realize the use will be limited.Whats a good small one to get?

found this for sale locally. Are they any good? Does it constantly need readjusting/calibration? Seems handy as a retrofit . this is not going to be used on a high dollar machine so the accuracy is at question anyway.

heres pics of the manual I have no other info and dont repair them,so questions best be directed to local service guy or directly to Hunter. Enjoy and Merry Christmas