Search results

I know there is not a whole lotta love for the open screw vise's, but I kind-0 have an attraction to the Littlestown PA #112 Vise. You guys saved my **** on a broken vise one other time, I wonder if you could look at these pictures and see if you see anything broke? Thank You.

Its the one on the right. Don't know the model number.

Any one know anything about this compressor? Said to be oil less, I'm guessing from his measurements and pictures, 25 to 30 gallon? ( not sure). I did Google it, but did not come up with anything. Thanks guys, Sent from my MotoG3 using Tapatalk

any one here get it, It was posted about 11:30, It's 2 PM now, I was going to Call/Write tell him I'd take it sight unseen........................(Anyone would have)

Can any one please look at these pictures, and happen to know there the 2 terminals of the Thermostat hook to? I jumped it our a few years ago, and can't find my notes. I didn't just make a jumper and jump the 2 wires, looks like and I remember taking a short wire out, and then, relocating a...

Is this a good ratchet? I found it on a yard sale pretty reasonably couple bucks appears to be brand new says Proto 5452 BL. I couldn't get a good picture of the number and it also says professional I have to figure out how to open it and grease it it sounds dry. Sent from my MotoG3 using Tapatalk

I just got 2 Lithium Ion/Li-Ion 20 Volt Batteries. Made sure the date was current. Says 2017 0n them. Has the "Fuel Gauge" When I press It I get one light only. Am I correct to bring these to a full charge before use?:headscrat thanks Guys.

Are they any good. About $25.00 on e bay?| Link Just for little stuff now. Vises and the like, Or am I just better off with a wire wheel? http://www.ebay.com/itm/Media-Sand-Blaster-Gravity-Feed-Abrasive-Handheld-ABS-Composite-Air-Speed-Gun-/251615101183?_trksid=p2385738.m2548.l4275

Gave $10.00 for the vise. Different. Think it's shop made. Maybe a metal shop project. Did a nice job though. I plan on making a better handle and maybe paint. Do I need a self etching primer for Al. ? $2.00 for the oil can. It's different too. I offered a dollar, he wanted $3.00 for each...

Do I need a special fixture for a spot light over a garage door? Or could I possibly just extend a 6"-8" wide board out, and possibly just mount a porcelain fixture to a metal box, and install like that. or do I need some type of outdoor fixture? I need to do it on the cheap, cause I may not be...

Did Snap 0n ever make a box like this. Looks like a nice box, but looks like a waterloo craftsman I think. But I could be wrong. Local seller states it's a Snap-On. He says 26 X 16 X 19, so I'm assuming 16"deep. Thanks. Sent from my MotoG3 using Tapatalk

I guess they are supposed to take 93 1/2" blades. Does anyone know if 95" blades would fit, or is the 93 1/2 the only ones ? There are some locally, but they might be too big.

What would you do with these, Just times when you need a slightly longer extension cord> (They sold out) http://www.ebay.com/itm/191829147978?customid=63c11f38421211e7901ec2dba11b680d0INT&pub=5574652453&campid=5335869999&afepn=5335869999&icep_id=117&ipn=icep&afepn=5335869999&rmvSB=true

I thought this Odd, and sure enough under "View all" There are New posts today! anyone else seeing this. 1st time I've had this problem. EDIT, LOL, This one showed up in control panel.

Thought you would like to see this switch I got from Amazon. It actually has a relay right in the switch, so you must split the Hot and the neutral. If power goes out, and comes back on, machine won't start till you press power again. was only $11.** Going to put it on my Craftsman Disk...

Snap On Counselor 2 Analyzer any idea what these are, and what all they do. do they pull codes too. And do you know if it has the old time scope patterns for the secondary ignition system?

On E Bay, but didn't know where to post> Thought I'd just start a new thread. Now just How Hot? I know the crazy Money these things fetch. But this is $100.00 BIN Free Ship Looks to be in fair shape.No, Real Nice actually. 112370803613 don't know why try to link to it getting Vig link re...

Long shot I know but looking for trailer hitch for Olds Alero, or Pontiac grand am. Reasonable. Thank you! Sent from my MotoG3 using Tapatalk

Came out pretty nice, used, of all things, toothpaste. Sent from my MotoG3 using Tapatalk

Kennedy Machinists Chest Tool Box http://www.ebay.com/itm/122405424705?ul_noapp=true Starting at $275.00. I think it's a little High. What is reasonable for both parties? About $125.00? I have one in pretty nice shape, Do you think $125.00 on craigslist is too much to expect. I am trying to...