Search results

  1. K

    Push mower no hot start

    I fought my ~16 yr old B&S mower all last year. I got harder to start every time I used it. Today I blew out the carb, pulled the plug, checked for spark, threw some gas in the plug hole and it fired right away. I put everything back together, filled the tank with new gas and fired it up. It...
  2. K

    2 Pole Breaker for a couple of 120v lines

    I would totally do this. Done correctly the only time the breaker is off is for servicing, so no problems with shutting 2 ccts off at the same time. And, really, anything to save a few bucks.
  3. K

    Replacement Bits for Picquic (or other) Multi Screwdrivers

    This is what I did when I lost one but and didn't want to buy a whole new kit.
  4. K

    Old Romex type wire.

    Loomex was what it was called in some places. "Loomex" was probably a brand name.
  5. K

    Tiny bolt for ratchet

    It's nothing special. The screw measures at 2.5mm x 14mm. There's no trouble finding that size, if 1 want 100. There is a bit of trouble find 1 or 2.
  6. K

    Tiny bolt for ratchet

    I learned a new term today.
  7. K

    Tiny bolt for ratchet

    I have this free ratchet that lost the tiny screw that holds it together. I don't even know where to start looking.
  8. K

    200A Garage Service

    Load calc is perhaps a bit premature at this point. If it's just a garage for parking, hobbies, and storage you probably won't need to keep the temperature higher than 15 celsius so the heat load isn't huge especially if it's well insulated. If it's a one man shop, one tool at time time...
  9. K

    3-wire and 4-wire 240V on same circuit?

    The "identified" conductor as part of a 3 wire 240v single phase circuit or a 4 wire 3 phase circuit does not count as a current carrying conductor in Canada.
  10. K

    One outdoor electrical disconnect service more than one condensor?

    Yes it is. There's lots of rules but it can be done.
  11. K

    110v door jam switch

    This is what has been commonly used. Yes it's 120v. It's fine if install correctly. https://www.homedepot.ca/product/leviton-momentary-door-switch/1000174875 The other option is some sort of occupancy sensor light. https://www.amazon.ca/dp/B09HMCS6X8/?tag=atomicindus04-20
  12. K

    The joys of buying old work...

    That's a dirty little secret you're not supposed to tell.
  13. K

    The joys of buying old work...

    We had Federal Pacific here in Canada as well. I don't know when it changed to Federal Pioneer. Sadly, Schneider stopped making them a few years ago and introduced the lesser Homeline products.
  14. K

    The joys of buying old work...

    Federal is the best.
  15. K

    The joys of buying old work...

    Keep the Federal they are the best. And figuring out some one else's work is always fun. One wire at a time is my advice.
  16. K

    Found Tools

    I have a problem with collecting meters. I have 2 old analogue, and 4 digital clamp on meters and 3 voltage/continuity (Wiggy) testers. My favorite among the herd is the cheap Greenlee and the cheap Wiggy. Even though there are 2 Flukes in there.
  17. K

    Found Tools

    I found a very expensive Fluke meter above a ceiling one day. The business owner was able to get it back to its proper owner. And I have found various small hand tools throughout the years. I always just claim the because I have left my share of stuff behind.
  18. K

    Best DMM for AC work?

    I have some analogue meters as well. They are great for certain tasks. My everyday clamp meter is a $100 Greenlee that I bought many years ago. I have more expensive meters but that's the one I like. Beware it doesn't take long before you're a collector of old meters.
  19. K

    What do you wish you had done differently when you built your shop?

    I would like this but I didn't think of it when I was building. Good lighting. Both interior and exterior. Compressed air in many spots. You may end up not using some but that's ok. I'm in a part of the world where cold is a bigger consideration than hot. Insulation under the slab would...
Top Bottom