Search results

I was given a small pancake compressor by my neighbour that needed some work. He is not very handy and bought a new one. I don't need another compressor, in fact I have too many already . But there's always room for more. I donated it to the volunteer group I work with to use for air for our...

These are made to fit M style ( & perhaps other style) air couplers. they are the seal, or wear part where the plug seals to the coupler. Very easy to install , and the rubber seems very good quality I have had good luck with these, going on a year and a half. Mind you, my stuff isn't getting...

Have a pc of 5/16 OD aluminum tube from a pancake compressor . it has a weird connection on one end with a hosebarb on the other. from vibration it has cracked in the middle . I would just remake the entire pc from copper, but I don't want to get into the weird end. I am pondering a connection...

got a question , at the volunteer warehouse in a storage room is a receptacle that is switched at the breaker panel , it's on a separate circuit. at one time we used it for the radio , to turn it on & off. . We have since had an outlet wired to the main lights that we use so it comes on with the...

like watching IC weld on You Tube, he's an amazing welder/fabricator . This has to be one of the scariest hitches I've ever seen

Does any one know off hand if porta power threads are common place? I'm talking the ram threads for accessories, not the hydraulic lines . I have the chain hooks both male & female but hoping to fab up a special puller "tang" for a job. That's if it can be done fairly easily . I have not...

No affiliation to Tom Lipton, other than I like his videos . He made a cool machinery jack in this video. might be of value to the GJ crowd

I acquired a typical 4x6 import bandsaw cutting portion only. it must have fallen as the base was not with it, and the belt & pulley cover was dented to all get SH** . it doesn't appear to have tons of use , it came from a wood stair building company so I'm guessing it was used for wood . I...

My 2023 GJSS @1320stang gifted me , among other things, a Dremel chuck . Apparently they aren't 100% universal . My Dremel is recently new to me, but a gently used older model, so I'm guessing that's where the difference is . When I installed the chuck on the tool , it would not close very...

got an odd or unique situation on a project I'm working on for a family member limited amps available; 30 amp @ 240 / "borrowed" from neighbours via 10/3 cord need some temp heat in the project . need to heat the main floor to a comfortable working temp, say 65°. the basement needs a...

never had a dremel , never thought I needed one before, but I found a nice used one @ Habitat a few weeks ago for $15 and thought, Why not... add it to my collection of stuff that will never get used.... WRONG. I've actually used it 3X so far & wonder how I would have done what I did without it...

I have an air hose reel like pictured, it's missing the crank handle & I plan on using it at the volunteer warehouse for running our pneumatic carton sealer . I plan on putting it up high on the wall so it's not in our way. that would make the winding up by hand impossible. So I am going to add...

this video popped up in my you tube feed this evening. a great video of machining a miniature jack. I ran it at 2x speed as there's no narration , just captions.

as the title states, curious why vises are measured by jaw width and not what the maximum jaw opening it will grip

just bought a heater as per title for some temp supplemental heat for an upcoming project . it has a typical 30 amp plug on it, with #12 cord . is 12 gauge ok for about a 20 foot run or do I need #10? hoping I can use some of my #12 if it's OK.

Took this project on to clean up a frozen solid spray foam gun Cleaned one up a few years ago, this is another . A buddy was tossing it,so of course Hoarder Cobbler had to take it. I'll probably give it back to him when I'm done with it . took it to pieces as it was solid cured foam inside...

got this pin vice with 4 collet sizes and a never seen before extension . drive end is 3/8, driven end is 1/4 , also came with a small star socket . I read Apex on the extension . . a whopping $3 for both pcs.

Electrician Heath installs a generator transfer panel & he had the meter pulled .He's not touching the main breaker or anything ahead of it. all he's doing is rewiring some breakers basically. what they do for TV ... the way I see it .

I locally picked up a slightly used 240 heater today along with some cable and a receptacle . I actually have a use for both (individual projects) and it just happened I saw the listing for both at a real fair price . In the pictures I could see it was 10/3 and I thought, here is another...

As the title says, my cobbled up compressor. slowly going thru my pile of stuff that crapped out when I was working full time. plus my hoarder tendencies added to the piles the senco pc 1010 compressor tank leaked, and the jobmate motor crapped out . so in a ceremony with a welder, some copper...